Jeco FCL093 User manual

Currentinstructionsat www.jeco-inc.com 1-800-893-3006 Page1of3
PartsList:
A.PumpHandle
andPlasticScrew
Qty:1
B.PumpQty:1 C.BottomQty:1 D.Pump&Adapto
r
Qty:1
E. LEDLight
Qty:1
ThanksforshoppingwithJeco

WaterPumpand PotFountain
withLEDLights
SKU#FCL093/15030064
1-800-893-3006
Ontario
,
CA
91761
MadeinChina
If you havequestionsregarding thisproduct, call
1-800-893-3006Mon.-Fri.9:00-5:00PST
(California)andaskforourproductspecialists,or
e-mail: [e-mail]
SeemanymoreproductsontheInternet!
www.jec
o
-
inc
.com

Currentinstructionsat www.jeco-inc.com 1-800-893-3006 Page2of3
ToAssemble:
Step 1:Attachthe pumphandle (A) intothepump(B), using the plastic screwtofixit.
Step 2:
A:Route the pre-assembledwater hose onthe Top pump(B)tothe bottom(C).
B.Carefully attachthepump(D)tothe hose, makingsure toplacethepumpinthecenter
ofthebottom (C).
C: CarefullyconnecttheLEDlights(E)tothelight cablecomes out from pump (D),
making sureboth parts connectsecurely.
Step 3:Fill thebasin(C) withcleanwater, makingsure thepump(D)is fullysubmerged.
Note: Themaximumwater levelshouldbeapproximately 1.2inches belowthe topedgeof
the basin (C).

Currentinstructionsat www.jeco-inc.com 1-800-893-3006 Page3of3
Step 4: Finally, connect theplug ofpump(D)toaGFCIoutlet.
WARNING: Alwaysdisconnect the pump(D)beforeplacingyourhandsinthewater.
CAREANDMAINTENCE
lToeliminate thepossibility ofwater damagetoareasaround thefountain,checkfor
leaksandexcessive splashing afterthe initialset up ofthefountain.Itis highly
recommendedthis fountain beplacedin anareawhere it cannotbedamaged.
lDo notleave thefountainrunningforextendedperiodsoftime when no oneis present
to observetheperformance.
lCheckthe areaaroundthe fountain onaregular basis toensure thereisno leakage.
lDo notattendtoattemptto movefountainoncefilledwith water.