Jensen Heavy Duty JHD1620 User manual

*Some features may not be available depending on installed factory options.www.asaelectronics.com www.JensenHeavyDuty.com
JHD1620 Quick Reference Guide
Basic Operation
AUDIO MENU: With each
press of the button choose
from the following AUDIO
ADJUSTMENT options: BASS,
TREBLE, BALANCE (left to
right), & FADER (front to back).
Use the rotary encoder knob
to adjust desired mode.
MUTE: Press to
MUTE audio.
MODE: Continue to
press to navigate
through the following
modes: AM/FM,
*SAT, *iPOD, & AUX.
EQ/LOUD: Press to choose
one of the predefined bass
and treble curves. Press &
hold to turn loudness ON/OFF.
AUXILIARY INPUT: Insert stereo
connector from any portable audio player.
PTY/CAT MENU:
Press & hold to access
SYSTEM MENU. Press
<< or >> to navigate
though menu items.
Press ENTER to adjust
desired menu item.
POWER ON/OFF: Push
to turn power ON or OFF.
VOLUME: Rotate CLOCKWISE
to INCREASE (+) volume.
Rotate COUNTERCLOCKWISE
to DECREASE (-) volume.
AM/FM/RBDS/WB Controls
STATION STORE BUTTONS:
Press & hold to store current channel playing.
Momentarily press to recall stored channel.
NOTE: you can store up to 30 channels
(6 channels per band FM1, FM2, FM3, AM1, AM2).
AS/PS/FAV: Press to SCAN
through currently stored
presets. Press & hold to
STORE strongest broad-
cast stations in your area.
BAND: Press to select preset group
FM1, FM2, FM3, AM1, or AM2 each
with 6 channel memory locations.
WB: Press & hold to listen
to WEATHERBAND.
VOLUME: Rotate CLOCK-
WISE to INCREASE (+)
volume. Rotate COUNTER-
CLOCKWISE to DECREASE
(-) volume.
MUTE: Press
to MUTE audio.
PTY/CAT MENU: Press
to enter program type
search. Press << or
>> to navigate through
program types. Press
PTY to select desired
program type.
TUNE/SEEK: Momen-
tarily press >> to tune
UP in frequency or
<< to tune DOWN in
frequency. Press &
hold to SEEK to next
strongest station.

©Copyright 2009 ASA, LLC QRGJHD1620 - 1209
Clock Settings
PTY/CAT MENU: Press & hold to enter menu.
Press << or >> to navigate to SET CLOCK.
Press ENTER to select. Press << or >> to adjust
the HOUR. Press ENTER to move to the MINUTES.
Press << or >> to adjust the MINUTES. Press
ENTER to set the clock.
Activating your SIRIUS®Subscription —
Before you can listen to SIRIUS Satellite Radio, you must subscribe to the service.
1. With the radio power ON, press the MODE button to enter SIRIUS Ready mode. After displaying the SIRIUS logo, the Receiver will update all the SIRIUS channels.
NOTE: Don’t push any buttons or perform any operations until updating has been completed.
2. Once updated and the SIRIUS channels are received, the display will change to “Call 1-888-539-SIRIUS to Subscribe” and will place you in SIRIUS Satellite Radio’s
Preview Channel. Channel 184 is the SIRIUS preview channel. You will not be able to tune to any other Sirius Radio channels until you activate your subscription.
3. You will need to access your SIRIUS ID, which is displayed on channel 000. Press and hold the INFO/ENTER button on the radio to enter Direct Tuning mode.
Press << or >> to select digits 000. Press ENTER to make your selection. This will display your unit’s unique 12-digit SIRIUS ID Number.
4. Write the SIRIUS ID number down and have your credit card handy.
5. Contact SIRIUS on the Internet: https://activate.siriusradio.com/ Follow the prompts to activate your subscription.
You can also call SIRIUS toll-free at: 1-888-539-SIRIUS (1-888-539-7474).
SIRIUS® Radio Controls*
DISP/SCROLL: Press to
change display info between
single and dual line text dis-
play. Press & hold to SCROLL
Artist & Song Title info.
STATION STORE BUTTONS:
Press & hold to store current channel playing.
Momentarily press to recall stored channel.
NOTE: you can store up to 18 channels
(6 channels per band SIR1, SIR2, SIR3).
AS/PS/FAV: Press to scan
through currently stored presets.
Press & hold to store favorite
Artist or Song currently playing.
Press ENTER to select ARTIST.
Press FAV to select SONG.
BAND: Press to select
preset group SR1, SR2,
or SR3 each with 6 chan-
nel memory locations.
MUTE: Press
to MUTE audio.
PTY/CAT MENU: Press to enter category list
mode. Press CAT– to go DOWN a category
or CAT+ to go UP a category. Press << or >>
to navigate through category list. Press DISP/
SCROLL to navigate through Channel Name,
Artist & Song Title information. Press ENTER
to select desired song in category.
TUNE/SEEK: Press >>
to tune UP a channel
or << to tune DOWN
a channel. Press &
hold to fast search.
INFO/ENTER: Press
& hold to directly enter
station number. Press
<< or >> to change
number. Press again to
select desired number.
NOTE: Requires SIRIUS Tuner & Antenna. Sold Separately.
iPod® Controls*
RPT: Press to REPEAT
current playing track.
Press to release function.
MUTE/PLAY/PAUSE:
Press to PLAY or
PAUSE current audio.
INTRO SCAN: Press when
iPod is playing to play each
track for 10 seconds in se-
quential order. Press again
to SELECT current song.
RDM: Press when
iPod is playing to play
each track in RANDOM
order. Press again for
NORMAL play.
DISP/SCROLL: Press to
change display info between
single and dual line text
display. Press & hold to
SCROLL Artist & Song
Title info.
VOLUME: Rotate CLOCK-
WISE to INCREASE (+)
volume. Rotate COUN-
TERCLOCKWISE to
DECREASE (-) volume.
PTY/CAT MENU: Press
to enter playlist selection
mode. Press << or >> to
navigate through Playlists,
Artists, Albums, Genres,
Songs, Audiobooks &
Podcasts. Press ENTER
to select desired item.
Press << or >> to navigate
through selected item
folder. Press ENTER to
select desired song.
TUNE/TRK: Press to
tune to next or previous
track. Press & hold to
FAST FORWARD or
REWIND current track
playing. Release for
normal playback.
NOTE: Full iPod control requires JENSEN iPod interface cable. Sold Separately.
VOLUME: Rotate CLOCK-
WISE to INCREASE (+)
volume. Rotate COUNTER-
CLOCKWISE to DECREASE
(-) volume.