Jet Thruster JT-30 User manual

PRESS TO HULL TO DETERMINATE THE HULL ANGLE
Nozzle 0˚
I-324-10 (JT-30 & JT-50)
I-324-20 (JT-70 & JT-90)
- Nozzle must be 7-10 cm bellow waterline
- Nozzle must be horizonal
- Nozzle must be perpendicular (90˚) to centerline of the boat
Perpendicular
90°
Angle Placement
Nozzle Placement
Nozzle 0˚

PRESS TO HULL TO DETERMINATE THE HULL ANGLE
BOAT HULL
Nozzle 25˚
I-330-10 (JT-30 & JT-50)
I-330-20 (JT-70 & JT-90)
- Nozzle must be 7-10 cm bellow waterline
- Nozzle must be horizonal
- Nozzle must be perpendicular (90˚) to centerline of the boat
Perpendicular
90°
Angle Placement
Nozzle Placement
Nozzle 25˚

PRESS TO HULL TO DETERMINATE THE HULL ANGLE
BOAT HULL
Nozzle 35˚
I-333-10 (JT-30 & JT-50)
I-333-20 (JT-70 & JT-90)
- Nozzle must be 7-10 cm bellow waterline
- Nozzle must be horizonal
- Nozzle must be perpendicular (90˚) to centerline of the boat
Perpendicular
90°
Angle Placement
Nozzle Placement
Nozzle 35˚

PRESS TO HULL TO DETERMINATE THE HULL ANGLE
Nozzle 35˚ SY
I-333-10 SY (JT-30 & JT-50)
I-333-20 SY (JT-70 & JT-90)
- Nozzle must be 7-10 cm bellow waterline
- Nozzle must be horizonal
- Nozzle must be perpendicular (90˚) to centerline of the boat
Perpendicular
90°
Angle Placement
Nozzle Placement
Nozzle 35˚SY

PRESS TO HULL TO DETERMINATE THE HULL ANGLE
BOAT HULL
Nozzle 45˚
I-336-10 (JT-30 & JT-50)
I-336-20 (JT-70 & JT-90)
- Nozzle must be 7-10 cm bellow waterline
- Nozzle must be horizonal
- Nozzle must be perpendicular (90˚) to centerline of the boat
Perpendicular
90°
Angle Placement
Nozzle Placement
Nozzle 45˚

PRESS TO HULL TO DETERMINATE THE HULL ANGLE
Nozzle 45˚ SY
I-336-10 SY (JT-30 & JT-50)
I-336-20 SY (JT-70 & JT-90)
- Nozzle must be 7-10 cm bellow waterline
- Nozzle must be horizonal
- Nozzle must be perpendicular (90˚) to centerline of the boat
Perpendicular
90°
Angle Placement
Nozzle Placement
Nozzle 45˚SY

PRESS TO HULL TO DETERMINATE THE HULL ANGLE
Nozzle 55˚
I-339-10 (JT-30 & JT-50)
I-339-20 (JT-70 & JT-90)
- Nozzle must be 7-10 cm bellow waterline
- Nozzle must be horizonal
- Nozzle must be perpendicular (90˚) to centerline of the boat
Perpendicular
90°
Angle Placement
Nozzle Placement
Nozzle 55˚

PRESS TO HULL
TO DETERMINATE THE HULL ANGLE
Nozzle 65˚
I-341-10 (JT-30 & JT-50)
I-341-20 (JT-70 & JT-90)
- Nozzle must be 7-10 cm bellow waterline
- Nozzle must be horizonal
- Nozzle must be perpendicular (90˚) to centerline of the boat
Perpendicular
90°
Angle Placement
Nozzle Placement
Nozzle 65˚