Floe V1600 PWC User manual

SHEET 1 OF 8
FLOE SOLAR PANEL MAST CLAMP
V1600 PWC
ASSEMBLY INSTRUCTIONS
KIT P/N 511-01359-00
TOOLS REQUIRED
-9/16” SOCKET/WRENCH
-3/4” SOCKET/WRENCH
-TORQUE WRENCH
-TAPE MEASURE
INSTRUCTION P/N: 611
-
01359
-
00
RELEASED 04/1/19
© Manufactured by:
Floe International Inc.
48473 State Hwy. 65
McGregor, MN 55362
www.floeintl.com
*LIFT & SOLAR PANEL KIT NOT INCLUDED
NOTE:
REQUIRES 511-01356-00 (SOLD SEPARATELY)
MAY REQUIRE 910-16102-00 (SOLD SEPARATELY)

SHEET 2 OF 8
BILL OF MATERIALS/EXPLODED VIEW
P/N 511-01359-00 MOUNT, LOWER SP MAST CLAMP, V1600
NUMBER PART NUMBER QTY. DESCRIPTION
1 111-00490-00 1 WELD’T, V1600 SOLAR PANEL LOWER CLAMP

SHEET 3 OF 8
STEP 1
IF INSTALLED, REMOVE VINYL CAP FROM TOP OF CORNER POST “A” (FIGURE 1.1). LOOSEN ½”
NYLOCK NUT ON DC WINCH MOUNT, BUT DO NOT REMOVE (FIGURE 1.2).
FIGURE 1.1
FIGURE 1.2

SHEET 4 OF 8
INSTALL INSERT INTO CORNER POST WHILE LEAVING 5 INCHES EXPOSED FROM TOP OF CORNER
POST (FIGURE 1.3 & 1.4). TORQUE ½” NUT TO 60 FT-LBS (FIGURE 1.4).
FIGURE 1.3
FIGURE 1.4

SHEET 5 OF 8
STEP 2
INSTALL (2) ½” X 1 1/4” BOLTS (INCLUDED IN SOLAR PANEL KIT) INTO CLAMP WELDMENT (FIGURE
2.1). PLACE (2) ½” NYLOCK NUTS ON BOLTS (INCLUDED WITH SOLAR PANEL KIT). DO NOT TORQUE
(FIGURE 2.2).
FIGURE 2.1
FIGURE 2.2

SHEET 6 OF 8
SLIDE CLAMP WITH BOLTS ONTO INSERT UNTIL CLAMP BOTTOMS OUT ON TOP OF CORNER POST
(FIGURE 2.3). TORQUE 60 FT-LBS (FIGURE 2.4).
FIGURE 2.3
FIGURE 2.4

SHEET 7 OF 8
STEP 3
REFER TO INSTRUCTIONS P/N 611-01345-00 FOR INFORMATION ON HOW TO ASSEMBLE SOLAR
PANEL MAST (SOLD SEPARATELY).
FEED WIRE HARNESS THROUGH LOWER MOUNT, THEN INSERT MAST INTO CLAMP. ALIGN HOLES IN
MAST WITH HOLES IN CLAMP (FIGURE 3.1). ATTACH SOLAR PANEL MAST TO CLAMP USING (2) 3/8” X
1” BOLTS AND (2) 3/8” WASHERS (INCLUDED WITH SOLAR PANEL KIT) (FIGURE 3.2). TORQUE BOLTS
TO 10 FT-LBS (FIGURE 3.3)
FIGURE 3
.1
FIGURE 3
.2
FIGURE 3
.3

SHEET 8 OF 8
STEP 4
CONNECT THE RED LEAD TO THE POSITIVE TERMINAL AND THE BLACK LEAD TO THE NEGATIVE
TERMINAL OF THE BATTERY. KEEP WIRES AWAY FROM ALL MOVING COMPONENTS.