jetvision.de Active Diapason Antenna User manual

Quick Start Guide
„Active Diapason“ Antenna
Art. 66077
Art. 68140
Art. 68200
Art. 68240
Art. 69140
Art. 69200
10/2016
Hardware Installation
Caution:
Static electricity around the
antenna can damage your
Radarcape or Internet router
if there is no ground
connection!
Do NOT mount the
antenna on isolated ground,
e.g. wooden stick or plastic
or without any connection
to ground!
Distribution
Günter Köllner Embedded Development GmbH
85256 Vierkirchen, Germany
Mast Pole / Antenna Mouting Point
Active Diapason Antenna
USB cable
Bias
Tee
antenna
cable
Caution:
Static electricity around the antenna can damage your Radarcape
or Internet router if there is no ground connection!
Do NOT mount the antenna on isolated ground e.g. wooden stick or plastic
or without any connection to ground!
IMPORTANT!
conductive
connection
to ground
antenna
cable
IMPORTANT!
conductive
connection
to ground
Radarcape
Mast Pole / Antenna Mouting Point
Active Diapason Antenna
USB cable
Bias
Tee
SMA/MCX
pigtail
PC
Dongle
Mast Pole / Antenna Mouting Point
Active Diapason Antenna
USB cable
Bias
Tee
antenna
cable
Caution:
Static electricity around the antenna can damage your Radarcape
or Internet router if there is no ground connection!
Do NOT mount the antenna on isolated ground e.g. wooden stick or plastic
or without any connection to ground!
IMPORTANT!
conductive
connection
to ground
antenna
cable
IMPORTANT!
conductive
connection
to ground
Radarcape
Mast Pole / Antenna Mouting Point
Active Diapason Antenna
USB cable
Bias
Tee
SMA/MCX
pigtail
PC
Dongle

Box Contains (Art. 68200, Art. 69200):
• „Active Diapason“ Antenna
• Antenna mount
• Bias Tee
• USB power supply cable
• Quick Start Guide
Additional Bundle Parts
(Art. 68140, Art. 69140):
• Antenna cable (cable length 20 m)
(Art. 68240):
• Antenna cable (cable length 20 m)
• ADS-B USB Dongle
• SMA/MCX-pigtail
• Small indoor antenna
(Art. 66077):
• Radarcape
• Antenna cable (cable length 20 m)
• Wall plug power supply
• 5 m network cable
• GPS antenna (cable length 5 m)
Quick
Start
Guide
Connections
1. Connect the„Active Diapason“ Antenna with the antenna
cable to the Bias Tee, place the antenna as free and as high
as possible.
Make sure that the antenna has a conductive connection to
ground to avoid damage of Radarcape or Internet router!
2. Connect the Bias Tee to the receiver (e.g. Radarcape/ Dongle).
To connect the USB Dongle use the SMA/MCX-pigtail.
3. Connect the USB power supply cable to the Bias Tee and a
free USB port e.g. the front slot of the Radarcape.
4. Connect the receiver as specied in the receiver‘s manual.