JETWAY JetPad User manual
JetPad User’s Manual
www.jetway.com.tw
Manual Vision: 1.6
Release Date：August, 2011
User’s Notice
Copyright of this manual belongs to the manufacturer. No part of
this manual, including the products and software described in it
may be reproduced, transmitted or translated into any language in
any form or by any means without written permission of the
manufacturer. This manual contains all information required for the
utilization of this product to meet the user’s requirements. But it
will change, correct at any time without notice. Manufacturer
provides this manual “as is” without warranty of any kind, and will
not be liable for any indirect, special, incidental or consequential
damages (including damages for loss of profit, loss of business,
loss of use of data, interruption of business and the like).
Products and corporate names appearing in this manual may or
may not be registered trademarks or copyrights of their respective
companies, and they are used only for identification or explanation
and to the owner’s benefit, without intent to infringe.
Package Contents
Power Adapter
USB Cable
OTG Cable
Earphones
User’s Manual
Warranty Card
Safety Instruction
Operate the product according to the correct installation steps
and with great care to make sure safety and comfort using
experience. Please refer to the following safety instruction
guide to avoid danger of electric shock or fire. Abide by the
previous safety instruction guide to use and maintain the
product and the hard disk to make sure of safe operating
environment.
Please follow the instruction manual for operation guide.
The appropriate operating temperature ranges from 0 °C–35
°C (32 °F–95 °F).
The operation humidity for this product is 5% to 80% RH.
To avoid high temperature, please DO NOT overload the
maximum power of the external power supply while the
system is consuming high voltage. Be aware of the maximum
temperature allowance of the power supply.
See to it that the product is not working near the water.
Always unplug power cable and other hardware cables from
the system before cleaning.
Apply only dry cloth for cleansing the product.
Make sure that there is no heat source nearby when the
product is working.
Make sure that the thermal louver of the product is not
blocked.
Make sure to remove the power plug from the product when
there is a thunder storm.
Please remove the power plug from the product when you are
not going to use the product for a long time.
Make sure to set up or use the product on a stable surface.
Make sure not to drop the product or strike it by any means.
Make sure not to move the product when the device is
charging power.
Make sure not to step on the power cables and other cables or
rest anything upon them.
Please contact qualified technician for maintenance or repair.
Use only accessories and parts that are made by the qualified
manufacturer.
CHAPTER 1: BRIEF INTRODUCTION ........................................................... - 2 -
1.1 PRODUCT OVERVIEW ................................................................................................. - 2-
1.2 BUTTONS &CONNECTORS....................................................................................... - 3-
CHAPTER 2: PREPARATION BEFORE USING THE PRODUCT................ - 4 -
2.1 HOW TO POWER ON THE DEVICE ............................................................................. - 4-
2.2 HOW TO POWER OFF THE DEVICE ........................................................................... - 5-
2.3 HOW TO CONNECT THE DEVICE TO PC OR NOTEBOOK .................................... - 5-
2.4 HOW TO USE TF CARD............................................................................................... - 6-
2.5 BATTERY MANAGEMENT AND CHARGE ................................................................ - 6-
2.6 USER’S INTERFACE..................................................................................................... - 7-
2.7 FUNCTION LIST ............................................................................................................ - 9-
CHAPTER 3 OPERATION GUIDE ................................................................- 11 -
3.1 LANGUAGE &KEYBOARD SETTINGS...................................................................- 11 -
3.2 WI-FI SETTINGS.........................................................................................................- 14 -
3.3 STATIC IP ADDRESS SETTINGS AND CONNECTION...........................................- 21 -
3.4 USB HOST FUNCTION ...........................................................................................- 27 -
3.5 3G NETWORK FUNCTION ........................................................................................- 28 -
3.6 APK INSTALLER........................................................................................................- 32 -
3.7 EXPLORER...................................................................................................................- 36 -
3.8 SOUND RECORDER...................................................................................................- 39 -
3.9 BROWSER....................................................................................................................- 41 -
3.10 ANDROID MARKET ....................................................................................................- 44 -
CHAPTER 4: HARDWARE CONFIGURATION.........................................- 51 -
TABLE OF CONTENT
- 2 -
Chapter 1: Brief Introduction
1.1 Product Overview
OTG connector
Volume-
Power button
Menu Button
Escape
TF card reader Speaker
MIC
Earphone
Power connector
Volume+
Camera
USB connector
Option Menu
- 3 -
1.2 Buttons & Connectors
Name Function
Power button Press for a long time to power on/off;
Press for a short time to lock the screen
or wake up the screen
Volume + Press to increase the volume
Volume - Press to decrease the volume
Escape Escape: Press to return to upper menu
Option Menu Option Menu: Press to view optional
menu items of application
Main menu Press to return to desktop; Press for a
short time also to pop up relative menu
Speaker Speaker output
MIC Microphone for sound recording
Earphone 3.5’’ earphone connector
Power connector 2.5 mm DC5V/2A battery charging
connector
TF card reader External TF card slot
OTG OTG connector to external USB
Disk/Mouse/Keyboard/LAN/3G Doogle
USB USB connector to computer (PC or
Notebook)
- 4 -
Chapter 2: Preparation before Using the
Product
2.1 How to power on the device
The device will automatically power off when connected with power
adapter.
When the device is off, press Power button for 3 seconds long for
system to enter Android Start-up Status Bar. It takes about 30
seconds for the desktop to show up.
The screen is on Lock status. User needs to hold Lock icon
upwards to the green point for the device to Unlock automatically
as the following photo shows:
Connect the device with PC, system will start automatically (only
Hold Lock icon upwards to the
g
reen
p
oint to unlock the screen
Green Point
- 5 -
to power the device, not to charge it).
Power Saving Mode and Screen Lock: Press Power button
slightly after system starting-up to enter Sleep power-saving mode.
Press Power button again and to light the screen in 1 second.
Notice:
In power-saving mode the previous operations are still valid and
will continue, e.g. music or video is still playing but the screen is
black.
2.2 How to power off the device
When the device is on, press Power button for 3 seconds long
for Power off Confirmation Interface to show up. The system will
power off automatically after you confirm to power off.
The device will give off warning beeps when battery is low and
power off automatically if it is not charged. If the device fails to
boot up, please charge it for 5 minutes before starting it up
again.
2.3 How to connect the device to PC or Notebook
Start up the computer and connect the device to PC with
specialized USB cable to realize data transmission between the
device and PC. Open the device as a USB storage device and
you can copy or delete the files of the device on the PC.
Notice: Files of the device are not allowed to be opened or
played when the device is connected to PC. The company is not
responsible for abnormal performance of the device or PC resulted
from such operations.
- 6 -
2.4 How to use TF card
User will find two removable disks after connecting the device to
PC. The first one being the memory card of expansion slot and
the latter being internal memory disk of the device. User can not
access to the first disk if no memory disk is inserted in card
reader.
Notice:
The device only support TF card (up to 32GB at most).
Please disconnect the device from computer before
uninstalling TF card.
How to insert/remove the expansion card
a) To insert TF card: Place the device with the screen side up.
Push the TF card (the side with metal contacting pins
downwards) into the card reader slot. The device can read
files inside the TF card only under such condition.
b) To remove TF card: Push the card inside slightly and the
card will spring back. Pick out the card.
2.5 Battery Management and Charge
Charge the battery for 8~12 hours to ensure enough
power at the first time you are using the device.
Connect the micro part of power adapter to DC
power-in connector of the device and the other end to power
supply connector. Battery icon will scroll on desktop to indicate
- 7 -
the device is in charging status. Please wait until the device is fully
charged before unplugging charger. Charging LED indictor will turn
light blue when charging process is completed. The battery icon will
stay still on desktop as well.
Notice:
Please contact your local dealer for specialized charger (5V-2A
output).
9V charge is not allowed to charge the device. The company is
irresponsible for damage caused to device by using 9V charger.
2.6 User’s Interface
1 2 3
45 9
10
11 12
13
14
15
16
17
18
- 8 -
Notice:
Some function logo only appears when application is
enabled.
User’s Interface may look different if you rearrange the
icons.
8
7
6
- 9 -
2.7 Function List
No. Icon & Function
1 Click to return to home page
2 System is downloading item
3 Ethernet Connection is off
4 3G network is on
5 3G signal strength
6 3G network is off
7 Ethernet Connection is on
8 WIFI signal strength
9 Battery icon to show remaining battery power
- 10 -
10 Alarm clock is set
11 To decrease volume
12 To increase volume
13 Escape icon to return to previous page
14 Settings
15 Google Engine
16 Music play bar
17 Function module menu
18
To switch from desktops
- 11 -
Chapter 3 Operation Guide
3.1 Language & Keyboard Settings
Click ‘Menu’ icon to enter function menu, or click
‘Settings’ icon upon desktop, then click ‘Settings’
→‘Language & keyboard’ →‘Select language’ to find and
select device interface language.
Click ‘Setting’ to enter Settings page.
- 12 -
Find and click ‘Language & keyboard’ on ‘Settings’ menu.
Click ‘Select language’.
Click ‘Language & keyboard’.
- 13 -
User can pull up or pull down to view available language options
and click to select specific language for device user interface
language.
- 14 -
3.2 Wi-Fi Settings
Click ‘Menu’ icon to enter function menu, or click
‘Settings’ icon upon desktop.
Click ‘Menu’ or
‘Setting’ logo to
enter user’s interface
- 15 -
Click ‘Setting’ to enter Settings page.
Click ‘Setting’ to enter Settings page.
- 16 -
Click ‘Wireless & networks’.
Click ‘Wireless & networks’.
Table of contents
