Jida Scola Boyi III User manual

Changchun Jida Scola Co.,Ltd Boyi III Electronic Whiteboard Instruction Manual
- 1 -
Instruction Manual
Boyi III, Series Portable Electronic Whiteboard
(for basic operation)
Traceless Writing with “Wireless Mouse”
Zero Distance Interactive Communication

Changchun Jida Scola Co.,Ltd Boyi III Electronic Whiteboard Instruction Manual
- 2 -
TABLE OF CONTENS
Safety........................................................................................................................................................... 7
Installation and Movement .........................................................................................................................7
Safety Instructions....................................................................................................................................... 7
Operation........................................................................ ...........................................................................8
Accessories..................................................................................................................................................8
Names and Functions of Various Parts........................................................................................................9
Setup of Electronic Whiteboard Software................................................................................................. 11
Installation and Uninstallation of Driver ................................................... ..... ............. . ............. - 16 -
Setup and Application of Hardware Environment.................................................................................- 18 -
Projector Setting....................................................................................................................................- 19 -
System Setting (Calibration) ..................................................................................................................- 20 -
Start the Electronic Whiteboard Software for Calibration........................... ....................................... - 20 -
Uninstallation of Electronic Whiteboard Software ...............................................................................- 23 -
Electronic File Viewing ..........................................................................................................................- 23 -
Appendix............................................................................................................................................... 24
Replacement of Battery in Electronic Pen ................................................................................................. 24
Trouble Shooting .......................................................................................................................................25
After-Sales Service and Technical Support ................................................................................................27

Changchun Jida Scola Co.,Ltd Boyi III Electronic Whiteboard Instruction Manual
- 3 -
●When assembling the Boyi III Elecrtonic Whiteboard, please refer to the Installing Instructions in page 18
to page 23.
●Before operating this unit, please read the Instruction carefully and keep it properly for future reference.
The Instruction is applicable to Boyi III, Scola.

Changchun Jida Scola Co.,Ltd Boyi III Electronic Whiteboard Instruction Manual
- 4 -
Preface
Thank you for purchasing Boyi III, electronic whiteboard. Please read this Instruction carefully, so as to
realize the optimal performance and safety.
General
Boyi III electronic whiteboard is a set of advanced man-machine interactive equipment developed aiming at
the demand and status quo of the electronic whiteboard market. It can be applied to various whiteboards,
blackboards or smooth planes, change them into large touch screens with writing and touch functions which
can be widely applied to fields of education, conference and military command. When being used together
with computers, projectors or rear-projection, it can realize dust-free writing, arbitrary comment and other
functions. With internet connection, its remote communication function can realize interactive remote
conference, remote teaching system, remote consultation and other applications. In fields of multi-media
interactive teaching, product demonstration, technical training, medical consultation, military commands and
various conferences, Boyi I electronic whiteboard is playing a very important role.
By connecting the electronic whiteboard to a computer and using a projector to display the contents of
the computer’s screen on the electronic whiteboard, the following functions can be realized:
a. mouse simulation function
most hard and smooth planes can be turned into man-machine interactive interfaces of operable
computers;
b. writing function
different pens (highlight pen, laser pen, etc.) can be used to write on the software interface, the written
content can be saved, printed and replayed and the function of recognizing handwriting can be realized;
c. multimedia support function
multimedia such as video, image and flash are supported.
Highlight Features
1.Compared with the existing electronic whiteboards based on electromagnetic induction, pressure sensitivity,
resistive film and other principles, Boyi III electronic whiteboard is characterized by flexibility, smart,
portability and etc.
a. small shape like a remote control.
b. portable and less weight, total weight is less than 200g.
c. easy set-up: personnel with basic computer skills can install it after simple training.
2. Compared with the existing electronic whiteboard based on ultrasonic and infrared ray positioning
technique, Boyi III interactive whiteboard makes a great progress in ultrasonic and infrared ray positioning
algorithm.
a. No flying spot, no deformation and no time delay;
b. More accurate positioning, higher resolution and wider working range can be achieved;
c. A smart stylus pen can replace the mouse to control the operations of any programs of the computer;
d. The smart stylus pen can act as a pen to write on the electronic whiteboard directly and the written
contents can be saved or replayed;
e. Any operating interface of the computer, such as pages of office/ website/ video/ program, can be
directly marked, written and painted;
f. The Boyi III electronic whiteboard has such auxiliary functions as screen shooting, screen shielding,
highlighting, keyboard entry, handwriting recognition, etc;

Changchun Jida Scola Co.,Ltd Boyi III Electronic Whiteboard Instruction Manual
- 5 -
g. The attached videotaping assistant software can videotape the board writing process and sound in
standard avi format and generate video courseware rapidly;
h. The electronic pen has the hovering function and can simulate the sliding operation of a mouse.
About the Operating Instruction
There are 2 separated operating manuals for Boyi III electronic whiteboard.
For basic operation
(this document)
Instructions for connecting and operating the electronic
whiteboard, as well as instructions of installing structure.
For software
(electronic document)
Instructions for the included electronic whiteboard software.
Operating Instruction (for Software) is placed in the attached
CD-ROM and can be read after the electronic whiteboard
software is installed in the computer. For detailed information
about manual viewing, please refer to “Electronic File Viewing”.
Abbreviations
Windows®refers to the Microsoft®Windows®operating system.
Windows®2000/XP/VISTA/7 refers to the Microsoft®Windows®2000/XP/VISTA/7 operating system.
Trademarks
Microsoft, Windows, DirectX and PowerPoint are registered trademarks of or trademarks of Microsoft
Corporation in the United States and/or other countries.
Intel and Pentium are registered trademarks of or trademarks of Intel Corporation in the United States
and/or other countries.
Adobe and Reader are registered trademarks of or trademarks of Adobe Systems Corporation in the
United States and/or other countries.
All other trademarks referred to herein are the property of their respective owners.

Changchun Jida Scola Co.,Ltd Boyi III Electronic Whiteboard Instruction Manual
- 6 -
Warning about Data Saving
When the memory device of the system or any selected memory device are adversely affected by faulty
operation, static, electrical noise, vibration, dust, etc. or are powered off due to faulty operation, repair or
negligence, the contents saved may be lost or changed. Please read the operating instruction and the
notes in help information before operating the system, and observe the notes during the operation.
Please seriously observe the following notes:
Make sure the backup or original files of all important data have been saved.
The manufacture hereby declares that, it takes no responsibility for loss or change of any data saved in the
soft disc, hard disc, optical disc or other memory devices.
System Requirements
CPU
Pentium®III processor or more advanced one
Operating System
Windows ®2000, Windows®XP, Windows®7, Linux, Mac
Interface
At least one USB interface
Memory (RAM)
Windows® 2000: 512 MB or larger (Windows® 2000: 256 MB)
Windows®XP: 1GB or larger (Windows®XP)
Windows®vista: 2GB or larger(Windows®vista)
Windows®7: 2GB or larger (Windows® 7)
Hard Disk
Hard disk with at least 300MB of free space (not including the space required
for saving files)
Others
CD-ROM driver, DVD-ROM driver or Internet connection
Applicable Scope
●Writing surfaces: regular whiteboard, magnetic blackboard, rear projector, glass plane, table
top, wall and other smooth surfaces.
●Display screen: 20 inch - 100 inch
●Working condition: temperature: -4oC - 40oC, humidity: 15%-85%
●Storage and transportation condition: temperature: -40oC - 85oC, humidity: 5%-95%
Note: Long-time storage under ultra-high or ultra-low temperature may affect the service life
of ultrasonic electronic whiteboard equipment and batteries.
Disclaimer
Changchun Jida Scola Co.,Ltd takes no responsibility for any accident or personnel injury caused by the
following circumstances, including but not limited to:
1. equipment modification or improper installation;
2. the equipment is applied beyond the expected purposes;
3. earthquake, fire, flood, tsunami, cyclone, lightening or other nature disasters.

Changchun Jida Scola Co.,Ltd Boyi III Electronic Whiteboard Instruction Manual
- 7 -
Safety
In order to avoid severe personnel injury, before
operating the machine, please read the content of
this Section carefully, so as to ensure correct and
safe operation.
The following graphic symbols are used herein.
Warn the operator not
to carry out certain
operation.
Warn the operator to observe
certain operating steps, so as to
ensure safe operation.
Installation and Movement
The machine can only be installed by
qualified technicians.
The machine not in use should be
removed, so as to prevent it from
falling off.
Do not install the machine at a
unstable place.
Do not place the machine in a damp,
hot and dusty environment. Long-time
storage of the machine under such
adverse condition may cause fire or
electric shock.
In order to avoid fire and electric
shock, do not place the machine in
rain or any damp environment.
Safety Instructions
Asphyxiation Hazard
Put the battery out of children’s reach,
so as to prevent them from being
swallowed.
Battery
Only batteries of specified model can
be applied. Application of batteries of
improper model may cause
overheating of cells/personnel burn or
leakage of cell acid liquor.
Make sure the battery electrodes are
correct when installing batteries.
Improper installation of batteries may
cause explosion and leakage, thereby
resulting in personnel injury.
Do not use worn-out or damaged
batteries, or leakage may occur.
Do not charge, short-circuit, heat or
damage the batteries or throw them
into fire, or leakage, heat discharge or
explosion may occur.
The batteries should be discarded only
after their contacts are covered by
insulating materials (such as adhesive
tape). If a battery is in direct contact
with other batteries, leakage, fire or
explosion may occur.
Do not weld the batteries, or leakage, heat
discharge or explosion may occur.
When the electronic pen is not in use for a long
time, the batteries should be removed, or the
battery seepage will occur.

Changchun Jida Scola Co.,Ltd Boyi III Electronic Whiteboard Instraction Manual
- 8 -
Operation
Accessories
Please check below accessories in the package, if missing, please contact the dealers. Boyi III contains the
following components:
Number
Part Name
Picture
Qty.
Remarks
1
Receiver
1
2
Metal Fixed Plate
1
3
Electronic pens
2
Standard configuration
4
Penpoint
5
5
USB cable (5m)
1
For computer connection
6
Disc installation
1
The content of the disc includes:
a. operating instructions (in two
forms)
b. driver software
c. application program software.
7
Instruction Manual
1
Instruction Manual (for basic
operation)
(including Installation Manual)
8
Quality Certificate and
Warranty Card
1
9
Giftbox
1

Changchun Jida Scola Co.,Ltd Boyi III Electronic Whiteboard Instraction Manual
- 9 -
Names and Functions of Various Parts
Receiver
Since the receiver is an important part of the product, please take care in application to avoid falling or
collision.
There is a magnet at the bottom of the Boyi III’s receiver, it can be attached on the metal panel; while using
on the non metal surface, please use our metal fixed plate.
Logo of Boyi III is a device working status indicator.
Fixing position of receiver
The fixing position of receiver directly affects the normal working of the electronic pen. Please refer to the
Diagram of Correct Installation Position in the right column to select the installation position for the
receiver.
1. Adjust the projector, make the projected area a normal rectangle. The maximum of the projected
area is 1.2x1.8m. ( please refer the manual of projector and this manual of setting the projector on
page 16.)
2. The distance of the sensor of the receiver and the projected area is 6cm.
3. The receiver is fixed vertically to the middle of the left of the projected area.
Color of
indicator
Status of receiver
Connection
Working
Red
Unsuccessful
Electronic pen
is not working
or out of the
working area
Green
Successful
Electronic pen
is working
normally in
the working
area

Changchun Jida Scola Co.,Ltd Boyi III Electronic Whiteboard Instraction Manual
- 10 -
Metal fixed Plate
While install Boyi III on the non metal plate, please use our metal fixed plate. At the back of the
metal fixed plate, there is a sticker, please remove the protective film, and stick the metal fixed plate on
the surface you required, a magnetic is used to connect the receiver and the metal fixed plate.
Please refer below images：
1. Tear the self-adhesive protective film at the back of the metal fixed plate.
2. Stick vertically the metal fixed plate to the middle of the left projected area.
3. Attach the magnet on the metal fixed plate, please note that the positioning holes at the bottom of
the receiver, should be installed accordingly with the positioning column of the metal fixed plate.
4. Please check and confirm the installation of Boyi III is firm.

Changchun Jida Scola Co.,Ltd Boyi III Electronic Whiteboard Instraction Manual
- 11 -
Electronic pens
Penpoint
The penpoint will emit ultrasonic wave and infrared signal when pressed down, which is equal to the left
button of a mouse is clicked.
Ultrasonic wave emitter
Do not cover the area with fingers, or the electronic whiteboard cannot accurately detect the position of
the electronic pen.
Pen key 1
Serving as left mouse button
Pen key 2
Serving as right mouse button
Battery cover
●Caution
●Try to write on the screen board with vertically-held electronic pen.
●Holding the electronic pen in other angles may cause error in working.
●Do not use several electronic pens simultaneously, so as to avoid faulty operation.
●Notes
●The penpoint can be replaced by pinching it and pulling out forcefully.
●The electronic pen has the function of preventing mistaken trigger; when the penpoint or two pen keys
are pressed down to make the electronic pen work for 2.5 minutes constantly, the electronic pen will
automatically stop working.
●When operating the electronic pen, you will hear buzzer, which means the electronic pen is emitting
ultrasonic wave to detect the position. The buzzer will not adversely affect the surrounding people or
equipment and also will not cause electronic shock.
Battery Replacement
1. Take down (put back) the battery cover. When putting back the cover, please follow reverse steps.
2. Insert (replace) the battery and then put back the cover. Please use AA alkaline battery (#5) and make
Battery Cover
Penpoint
Wave emitter
1 Pen Key
2 Pen Key

Changchun Jida Scola Co.,Ltd Boyi III Electronic Whiteboard Instraction Manual
- 12 -
sure the battery electrodes are correct.
Setup of Electronic Whiteboard Software
It is necessary to set up the electronic whiteboard software in the computer used together with the
electronic whiteboard.
When setting up the electronic whiteboard software, please observe the following notes.
●Caution
●Do not connect the computer with a USB cable before completing the setup.
If a USB cable is connected to the computer before the first setup of the software (the device may have
no response), please pull out the USB cable and then connect again.
●Do not connect two or more electronic whiteboards to the same computer (or faulty operation of the
computer may occur).
1. Turn on the computer power and start the Windows operating system.
2. Insert the attached CD-ROM into the CD-ROM driver and double-click the EWB Setup.exe on the disc to
activate the automatic setup of the setup procedure.
3. When the setup wizard appears, please operate according to the screen tip to continue.
1) Language selection--- click “OK” after selecting the language (Simplified Chinese/ English) you want.
3) Welcome interface--- click “Next” to continue

Changchun Jida Scola Co.,Ltd Boyi III Electronic Whiteboard Instruction Manual
- 13 -
3) Setup directory--- click “Browse” and click "Next" after selecting the install directory.
4) Setup path--- click “Browse” to change the default setup path and click “Next” to continue after
selecting the setup path.

Changchun Jida Scola Co.,Ltd Boyi III Electronic Whiteboard Instruction Manual
- 14 -
5) Create a desktop icon--- select “Create a desktop icon” or “Create a Quick Launch icon”.
6) Confirm the setup information-click “Install” after confirming the setup information and click “Back”
to modify if any problem is discovered.

Changchun Jida Scola Co.,Ltd Boyi III Electronic Whiteboard Instruction Manual
- 15 -
4. After the setup, click “Finish”.

Changchun Jida Scola Co.,Ltd Boyi III Electronic Whiteboard Instruction Manual
- 16 -
Installation and Uninstallation of Driver
The installation of driver of Boyi III, scola electronic whiteboard can finish automatically and its
uninstallation also finishes automatically while the application software is uninstalled. When the
application software is installed and uninstalled, the following driver installation and uninstallation
pictures will appear on the screen for a while.
Driver Installation Picture

Changchun Jida Scola Co.,Ltd Boyi III Electronic Whiteboard Instruction Manual
- 17 -
Driver Uninstallation Picture
Notes
(1) If the electronic whiteboard is connected to the computer when the driver is installed, the hardware
cannot be discovered after the installation finishes unless the USB interface of the hardware is pulled out
and inserted again; therefore, when installing software, please do not connect the electronic whiteboard
to the computer.
(2) After the driver is successfully installed, if the USB interface of the electronic whiteboard is inserted
into the computer, a prompt will appear on the screen and indicate the connection of a new hardware.
Wait without any operation. The device can work normally after a prompt of “New hardware is installed
successfully and can be used normally” appears.

Changchun Jida Scola Co.,Ltd Boyi III Electronic Whiteboard Instruction Manual
- 18 -
Setup and Application of Hardware Environment
Install Boyi III
Boyi III portable interactive whiteboard can be converted the hard surface into interactive whiteboard,
suitable surface of area is 30-80 inch.
schematic diagram: Boyi III was installed on the common board
Prepare to install
Boyi III portable interactive whiteboard can be applied to a ceramic steel whiteboard, and most display
screens. Before installation, please pay attention to your device and observe the following notes:
1. If a projector is applied to connect the whiteboard and the computer, please make sure the image
generated by the computer is projected on rather smooth and hard surface (such as blackboard,
whiteboard, wall, glass and other media) and pay attention to the position of the image projected.
2. For ease of device connection, please pay attention to the height of the display area (better to be not
higher than 2.5m) and the distance between the computer host and the display area (better to be less
than 5m).
Here is coonection diagram for using the projector through application of projection equipment.

Changchun Jida Scola Co.,Ltd Boyi III Electronic Whiteboard Instruction Manual
- 19 -
(1) Use USB cable (attached) to connect the electronic whiteboard and the computer.
●Receiver: the connector of the Micro USB of the Boyi III is inserted into the Micro USB port of the
electronic whiteboard.
●Computer: the connector of USB is inserted into the USB port of the computer.
(2) Connect the computer to the projector.
●For description of connection between the computer and the projector, please refer to relevant
Operating Instruction.
About Application Position
●Do not place the electronic whiteboard near stoves and cold/ hot air vents or at positions exposed to strong
wind.
●Do not apply the electronic whiteboard at places with temperature lower than -4oC or dramatically
changing.
Note 1: Electronic whiteboard may not operate normally under the above-mentioned environment.
Note 2：The strongest feature of Boyi III is using it converting the smooth and hard surface (such as
common whiteboard) into interactive whiteboard, do not required extra power supplier, please do not
supply extra power supply for this model.
Projector Setting
Take rectangle projected image as an example.
●Adjust the position of the projector, so as to project the image on the electronic whiteboard at right
angle.
●If the image is projected in trapezoid, the position of the electronic pen may not be read correctly.
Adjust the projector until the image becomes rectangle. For information about adjustment of projected
image, please refer to the instruction of the projector.

Changchun Jida Scola Co.,Ltd Boyi III Electronic Whiteboard Instruction Manual
- 20 -
Setting of Correct Resolution
●Set most suitable resolution for the computer and the projector. If the resolution is set incorrectly, it will
be difficult to see the image. Especially, if the resolution of the projector is lower than that of the
computer, the filament will switch off the display.
For information about adjustment of resolution, please refer to the instruction of the projector.
Do not look at the projection lamp directly.
●When using projection lamp, do not look at it directly, or your eyes may be damaged.
System Setting (Calibration)
About Calibration
As the projected image changes in size from time to time, calibration should be conducted before
using the projector. Through calibration, the size of current projected image is transferred to the
electronic whiteboard software, so as to make sure the software responses to the operation by user
at accurate position.
After Calibration
Do not move the receiver or the projector.
●Under the following circumstances, the position of projected image and the electronic pen will deviate
and should be calibrated again.
√ The position of the projector is changed.
√ The position of the receiver is changed.
√ The image area and image orientation are changed due to changes in scaling, focal length, etc.
√ The resolution of the projector or computer is changed.
Start the Electronic Whiteboard Software for Calibration
1. Use USB cable to connect the electronic whiteboard and the computer.
2. Open the electronic whiteboard software.
3. Calibrate.
4. According to the appearing order of the points as shown in the diagram, press down the electronic pen
at the center of each point (nine in total) until each point moves to the next position.