Jiecang JCHR35W3C1 User manual

JCHR35W3C1/C2
Hand-held LCD Remote Controller
User Manual
01 Product Info
JCH35W3C1
16-channel LCD
remote controller
JCH35W3C1
16-channel LCD
remote controller
JCH35W3C2
16-channel dual control LCD
remote controller
JCH35W3C2
16-channel dual control LCD
remote controller
02 Buttons
03 Parameters(more info please refer to the nameplate)
04 Caution!
05 Instructions
a.Channels & Groups Toggling
When the voltage is too low, the LCD screen digital display will be weak, prompting to
replace the battery.
Note：Channel 0 is the group control for all the channels.

b.Number of Channels Setting
c.Number of Groups Setting
Shortpress ,ifyou
wanttheChannelinthe
group,theChannel
numberwillbesteady-lit.
Shortpress again,if
youwanttheChannelnot
inthegroup, theChannel
numberwillbeflashing.
d.Channel in Group Setting
e.Check the Channels in Groups
f.Prohibit Dual-key Operation
g.Position Percent Setting
h.For other operations, please refer to the motor operation instruction
icon
Stop on the desired percentage down
and wait 3s. The shades will move to the
chosen percentage down position.