JINS MEME ES_R User manual

JINS MEME ES_R
REV_ESR_1.0US
Instruction Manual

JINS MEME ES_R
2
Preface
Thank you for purchasing JINS MEME ES_R.
This instruction manual provides notes and instructions on how to use JINS
MEME ES_R.
In order to enjoy prolonged use of your JINS MEME ES_R, read this manual
carefully before use to use it correctly and safely. In addition, store this
document safely in a place where you can view it as needed.
•Copying this document in part or entirety without permission is
prohibited.
•Every effort has been made to ensure the accuracy of the content of
this document, but if you notice any errors or have any questions,
please contact the JINS MEME Customer Support.
•The contents of this document may change in the future without notice.
•The product could be damaged if it is used in a manner not described
in this document.
Trademarks
•Android is a trademark or registered trademark of Google Inc.
•Microsoft and Windows are registered trademarks of Microsoft
Corporation in the United States and other countries.
•Bluetooth is a trademark or registered trademark of Bluetooth SGI Inc.
in the United States.
•Other company names and product names are trademarks or
registered trademarks of their respective companies.
•The symbols ™ and ® are abbreviated for trademarks and registered
trademarks in the text of this document.

JINS MEME ES_R
3
Safety Precautions
JINS MEME ES_R is designed to be used as a normal pair of eyeglasses, but
since it contains electronic components, it may result in damage that differs
from normal glasses if used improperly.
Please read the following safety precautions carefully to ensure proper handling
of the product.
JINS MEME ES_R is not a medical product. The device and its associated apps
cannot be used for diagnosis, treatment, or prevention of any disease, medical
condition, or injury.
If any problems occur, stop use immediately and contact the JINS MEME
Customer Support. Continued use under faulty conditions may lead to adverse
physical effects.
Safety precautions are classified as "WARNING" and "CAUTION" according to
the degree of harm or damage and urgency.
Symbol Description
This indicates a hazard with a medium level of risk which, if not
avoided, could result in death or serious injury.
This indicates a hazard with a low level of risk which, if not avoided,
could result in minor or moderate injury.
This is used to address practices not related to personal injury.
This indicates notes that must be read in order to use JINS MEME
ES_R properly.
This indicates additional related information in the guides when using
JINS MEME ES_R.
This indicates actions that must be avoided.
This indicates actions that must be performed.
This indicates the possibility of an electric shock.
This indicates the possibility of an explosion.
WARNING
•If you are wearing an implanted cardiac pacemaker or implanted
cardioverter-defibrillator, keep the device at least 15 cm away from you.
Otherwise, there is a risk of radio waves from the device affecting the
operation of the implanted cardiac pacemaker or implanted
cardioverter-defibrillator.
WARNING
CAUTION
NOTICE
Importan
t
Tip

JINS MEME ES_R
4
WARNING
•Do not use in a crowded place such as in a crowded train.
If there is anyone with an implanted cardiac pacemaker or implanted
cardioverter-defibrillator present, there is a risk of radio waves from the
device affecting the operation of the implanted cardiac pacemaker or
implanted cardioverter-defibrillator.
•Do not tamper with or alter the device in any of the following ways,
dropping, bumping, bending excessively, deforming, drilling holes, or
painting. Otherwise, it may lead to injury, damage, or failure.
•Do not leave the device and its accessories near or on top of an
automobile air bag.
Otherwise, there is a risk of a serious accident if the air bag is activated.
•Do not disassemble or alter the device. Do not attempt to repair it
yourself. No parts in this Pack can be repaired by customers.
Otherwise, there is a risk of accident. Contact the JINS MEME Customer
Support if your device fails.
•Do not allow the device to get wet or expose it to moisture while
charging.
Exposing it to moisture while charging can cause an electric shock, short
circuit, or fire.
•Keep out of the reach of children under 12 years old while charging.
Otherwise, it may cause an electric shock or other accident.
•Do not place the device near an open flame such as a gas range, candle,
or stove, and do not directly apply hot air, such as from a dryer.
Otherwise, it may cause damage including a rupture, discoloration,
deformation, overheating, fire or battery failure.
•Do not expose the device to prolonged direct sunlight. In addition, do not
store in locations exposed to direct sunlight or high temperatures and
humidity.
Otherwise, it may cause damage including a rupture, discoloration,
deformation, overheating, fire or battery failure. When not in use, store it
in its case.
•Be sure to turn OFF the power of the device in areas where use of radio
equipment is prohibited such as on an airplane or in a hospital.
Otherwise, it will adversely affect electronic and medical equipment and
may cause a malfunction.
•The lens may break if it is subjected to a strong shock. It may break and
result in blindness or serious injury to the eyes or head when used during
intense contact sports or when hit by a ball or hard object.
•If you have allergies or sensitive skin, physical damage may occur or
symptoms may worsen.
If you notice any physical symptoms, stop use immediately and consult
your doctor.

JINS MEME ES_R
5
WARNING
Notes on Handling the Built-in battery
•Do not charge or use the device in extremely high (such as saunas) or low
temperature environments.
Otherwise it may cause damage such as burns, discoloration,
deformation, overheating, fire or battery failure.
Use in an environment between 0 and 40°C.
•Use only the included AC adapter and micro USB cable to charge the
device.
Otherwise, it may cause an electric shock, short circuit, fire, malfunction
or failure.
•Turn off the device while charging.
•Do not wipe the device with a damp cloth while it is charging. Be sure to
remove the included AC adapter and micro USB cable before cleaning
the device.
Otherwise, it may cause an electric shock, short circuit, or fire.
•Do not use the charging micro USB terminal and micro USB cable if they
are dirty, contaminated, or deformed.
Otherwise, it may cause an electric shock, short circuit, or fire.
•Always hold the tip of the plug when unplugging the AC adapter from
the wall socket after charging. Also, do not plug or unplug with wet
hands.
Otherwise, it may cause an electric shock, short circuit, disconnection, or
other failure.
•Charge the battery by following the instructions in this document for
JINS MEME ES_R.
Otherwise, it may cause an electric shock, overheating, or battery failure.
•Do not put the device into a fire or incinerate it.
Otherwise, the battery may ignite or explode.
CAUTION
•Store in a location out of reach of children under 12 years old.
Otherwise, it may lead to an injury or accident such as the swallowing of
small parts.

JINS MEME ES_R
6
Notes on Handling
To prevent damage to or failure of the device, follow the instructions below
when handling it.
•Use both hands when putting on or removing the device.
Carefully use both hands when putting on or removing the device.
•When setting down the device, keep the convex side of the lens facing up.
The lens may be scratched if it is placed facing down.
•Do not apply heat to the device or place it in any location that is subject to high
temperatures.
Otherwise, the frame may deform or crack.
•Remove the device and turn the power OFF before going to sleep.
Sleeping while wearing the device can cause deformation, damage, or malfunction.
•The device is designed for adults and is not suitable for children to wear.
If the device does not fit properly, the three-point electrooculography sensor, three-
axis acceleration sensor, and three-axis gyro sensor may not accurately detect or
obtain data.
•Do not replace the battery of the device. The battery is built-in, and cannot be
replaced.
If the battery cannot be charged, contact the JINS MEME Customer Support.
•Do not take the device into bathrooms, saunas, swimming pools or any other area
where it may come in direct contact with water.
Otherwise it can cause a short circuit or malfunction.
•Do not use an abrasive liquid, alcohol, thinner, benzene, or polish remover to clean the
device. Also, do not wash it with water.
Otherwise, it can cause discoloration, deformation, damage, or malfunction.
•Do not insert anything into the micro USB terminal other than what is specified in this
document.
Otherwise, the internal components may be damaged.
•Do not store the device with any hard object such as metal as it may scratch the
device and visibility may be impaired.
•Always close the USB port cover when wearing the device.
The penetration of water or sweat can cause malfunction.
•Dispose of accessories for the device, such as the AC adapter, in accordance with local
regulations.
•Recycle the package in accordance with local regulations.
NOTICE

JINS MEME ES_R
7
Notes on Handling the 3-point Electrooculography Sensor Parts (nose pad
and inter-eyebrows part)
•Do not press or bend the three-point electrooculography sensor.
Otherwise it can cause damage or malfunction
•When adjusting the nose pads, make sure you do so while supporting the base
of the nose pad to ensure that no damage is caused. Use of excessive force and
consistent adjustment can damage the nose pads so please take care when
performing adjustments.
Damage caused by excessive force will not be covered under warranty.
•After use, gently wipe the sensor part with a soft cloth such as a cleaning cloth.
If not handled carefully, it may cause a malfunction or failure.
•If the three-point eye potential sensor part is dirty with sweat, sebum, or
cosmetics, gently wipe it.
Leaving it dirty may impair the measurement.
Notes on Radio Waves
Bluetooth uses the 2.4 GHz frequency band. In addition to industrial,
scientific, and medical equipment such as microwave ovens, this frequency
band is also used by other radio stations of the same type, on-board radio
stations for mobile identification requiring licenses such as those used in
factory production lines, specified low power radio stations that do not
require licenses, and amateur radio stations (hereinafter referred to as
"other radio stations").
•Make sure there are no "other radio stations" in the vicinity before
communicating with the device.
If there is radio wave interference between the device and "other radio
stations", immediately change the location of the device, disconnect the
Bluetooth, or turn OFF the power of the device. If this does not solve the
problem, contact the JINS MEME Customer Support.
•Keep away from other electrical appliances (such as microwave ovens or digital
cordless phones) when communicating.
When communicating in the vicinity of such equipment, normal communication
may not be possible or radio interference may occur.
If communication is affected, move away from such equipment.
•When a broadcast station or radio equipment is nearby and normal
communication is not possible, change the location of the device.
Normal communication may not be possible when the surrounding radio waves
are too strong.
•If there is a device equipped with wireless LAN in the vicinity of the device,
radio interference may occur and communication speed may be reduced or
connection may be impossible.
Keep away from any device equipped with wireless LAN when communicating.

JINS MEME ES_R
8
Notes on Disposal
Information on Disposal for Users of Waste Electrical & Electronic
Equipment
This symbol on the product means that used electrical and electronic
equipment should not be mixed with general household waste.
The correct disposal will help prevent potential negative effects on
human health and the environment.
For proper treatment, recovery and recycling of old products, please
take them to applicable collection points, in accordance with your
national legislation.
For more information about collection and recycling of used
products, please contact your local municipality, your waste disposal
service or the point of sale where you purchased the items.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or
supplier for further information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union. If you wish to discard these items, please
contact your local authorities or dealer and ask for the correct method of disposal.

JINS MEME ES_R
9
Table of Contents
Preface.................................................................................................................................................2
Safety Precautions.........................................................................................................................3
Notes on Handling.........................................................................................................................6
Notes on Disposal ..........................................................................................................................8
Table of Contents...........................................................................................................................9
1. Unit Description...................................................................................................................... 11
1.1 Checking the Package Content ................................................................................................ 11
1.2 Part Names........................................................................................................................................... 12
2. Before Use ................................................................................................................................. 13
2.1 Switching Operations ...................................................................................................................... 13
2.2 Charging Time and Usage Time............................................................................................... 14
2.3 Charging Method............................................................................................................................... 14
3. Using from a PC...................................................................................................................... 15
3.1 Installing the Software ................................................................................................................... 15
3.1.1 Downloading the Software ..................................................................................................................... 15
3.1.2 Installing ............................................................................................................................................................. 15
3.2 Establishing Communication with JINS MEME ES_R ..................................................... 19
3.2.1 Connecting the Dongle.............................................................................................................................. 19
3.2.2 Connecting with JINS MEME ES_R....................................................................................................... 20
3.3 Measuring with JINS MEME ES_R ............................................................................................. 22
3.3.1 Starting Measurement............................................................................................................................... 22
3.3.2 Stopping Measurement............................................................................................................................. 22
3.4 Disconnecting Communication.................................................................................................. 23
3.4.1 Disconnecting Communication with JINS MEME ES_R............................................................ 23
3.4.2 Disconnecting Communication with the Dongle........................................................................ 23
3.5 Uninstalling the Software.............................................................................................................. 24
3.6 Windows ................................................................................................................................................. 25
3.6.1 Data Acquisition Window......................................................................................................................... 25
3.6.2 Review Data Window ................................................................................................................................. 28
3.6.3 Settings Window............................................................................................................................................ 30
3.6.4 TCP Socket Communication Receive Format .............................................................................. 31
4. Using with an Android Device......................................................................................... 34
4.1 Installing the Software ................................................................................................................... 34
4.1.1 Downloading the Software ..................................................................................................................... 34
4.1.2 Installing ............................................................................................................................................................. 34

JINS MEME ES_R
10
4.2 Establishing Communication with JINS MEME ES_R ..................................................... 36
4.2.1 Connecting the Dongle.............................................................................................................................. 36
4.2.2 Connecting with JINS MEME ES_R....................................................................................................... 38
4.3 Measuring with JINS MEME ES_R ............................................................................................. 40
4.3.1 Starting Measurement............................................................................................................................... 40
4.3.2 Stopping Measurement............................................................................................................................. 41
4.4 Disconnecting Communication.................................................................................................. 42
4.4.1 Disconnecting Communication with JINS MEME ES_R............................................................ 42
4.4.2 Disconnecting Communication with the Dongle........................................................................ 42
5. Customer Service................................................................................................................... 43
6. Product Specifications......................................................................................................... 44

JINS MEME ES_R
11
1. Unit Description
1.1 Checking the Package Content
After opening the box, check the content of the package and the unit itself. If
any item is missing or damaged, please contact the JINS MEME Customer
Support.
The following items are included in this product:
JINS MEME ES_R (main unit)·····1
USB cable (for charging) ········1
Bluetooth ID* ········································1 AC adapter·······································1
Cleaning cloth······································1 Warranty············································1
Declaration of Conformity············1
* If the product is defective, the Bluetooth number is necessary for product
identification. Store the number in a safe place along with your warranty.
Warranty
Declaration
of
Conformity

JINS MEME ES_R
12
1.2 Part Names
JINS MEME ES_R

JINS MEME ES_R
13
2. Before Use
2.1 Switching Operations
Use the power button to operate the power and its connection of the device.
* The LED may not respond depending on the power status. In this case, charge the device.
•Turning the power ON
Press and hold the device’s power button for 2 seconds, then release it.
The LED flashes blue and enters advertising mode (communication
standby).
If the device is not connected while in advertising mode, the LED
turns red then the power turns off after 10 seconds.
•Turning the power OFF
Press and hold the device’s power button for 3 seconds.
The LED turns red then the power turns off after 10 seconds.
Refer to section "3.2.2 Connecting with JINS MEME ES_R" for
information on connection for measurement.
Tip
Tip

JINS MEME ES_R
14
2.2 Charging Time and Usage Time
The approximate charging time and usage time of the device are as follows:
•Charging time: Approx. 2 hours
•Continuous use time: Up to 16 hours
2.3 Charging Method
The built-in battery is not fully charged at the time of purchase. Please charge it
before using.
Be sure to use the included AC adapter and micro USB cable to charge.
WARNING
•Do not allow the device to get wet or expose it to moisture or rain while
charging.
Exposing to moisture while charging can cause an electric shock, short
circuit, or fire.
•Turn off the device while charging.
•Use the included AC adapter and micro USB cable to charge the device.
Otherwise, it may cause an electric shock, short circuit, fire, malfunction
or failure.
•Keep out of the reach of children under 12 years old while charging.
Otherwise, it may cause an electric shock or other accident.
• When charging for the first time, do not use until the device
is fully charged.
• Always charge before using when use, for the first time or
after an extended period of disuse.
• If the LED is not lit when connected to via USB cable to the
AC adapter, unplug the USB cable and plug it in again.
1. Insert the USB cable into the AC adapter.
2. Insert the USB cable into the micro USB terminal of the device.
3. Plug the AC adapter into the wall outlet.
The LED turns on red and charging starts. Charging is complete
when the red LED turns off.
* The charging time depends on the remaining amount of battery and
charging condition.
The device can also be charged from a PC.
To charge from a PC, connect the micro USB terminal of the device to
the USB terminal of the PC using a USB cable.
Importan
t
Tip

JINS MEME ES_R
15
3. Using from a PC
3.1 Installing the Software
Customized software must be installed on your PC in order to check the data
obtained with the device in real time.
3.1.1 Downloading the Software
Download the software from the separately described download page.
3.1.2 Installing
1. Extract the zip file and double-click the setup.exe file in the app
folder.
The installer starts and the initial window appears.
If you are logged in with a non-administrator account, the
[User Account Control] window appears. Request the
administrator to perform the installation if you wish to
continue.
• See the separate email for the storage location of the setup.exe
file.
• It may be shown as "setup" depending on the Windows display
setting.
2. Check the software version and click the Next > button.
Initial window
The [User Information] window appears.
Important
Tip

JINS MEME ES_R
16
3. Enter the user name, organization name, and serial number
and click the Next > button.
User Information Input window
The [Select Destination Location] window appears.
The
Next > button will not operate if the serial number is
incorrect.
4. Specify the software installation destination and click the Next >
button.
Select Destination Location window
The [Select Start Menu Folder] window appears.
Importan
t
Enter the user name.
Enter the organization name.
Enter the serial number.
Specify the installation destination.

JINS MEME ES_R
17
5. Specify the folder name to register on the Start menu and click
the Next > button.
Select Start Menu Folder window
The [Select Additional Tasks] window appears.
6. Specify creation of desktop icon and click the Next > button.
Select Additional Tasks window
The [Ready to Install] window appears.
Specify the installation destination.
Specify whether to create an icon.

JINS MEME ES_R
18
7. Check the input information and click the Install button.
Ready to Install window
8. When the Installation Completed window appears, click the
Finish button.
Installation Completed window
When software installation is finished, the Installation Completed
window closes.

JINS MEME ES_R
19
3.2 Establishing Communication with JINS MEME ES_R
In order to use the functions of JINS MEME ES_R, communication must be
established between the dongle connected to the PC and the device.
3.2.1 Connecting the Dongle
Establish communication between the device and the dongle.
1. Insert the dongle in any USB port on the PC.
2. Click JINS MEME ACADEMIC icon and
start the software.
The Data Acquisition window appears.
Refer to "3.6.1 Data Acquisition
Window" for the details of the screen
to be displayed.
3. Click the Scan port button to
search the dongle.
The combo box shows the port
number of the USB.
If the dongle driver is not found, try the CP210x USB -
UART bridge VCP driver provided by Silicon Labs.
4. Select the destination port
number from the list and click
the Open button.
Tip
Importan
t
Scan with dongle inserted
Before establishing dongle
communication from any port

JINS MEME ES_R
20
The Open button changes to the
Close button and dongle
communication is established.
3.2.2 Connecting with JINS MEME ES_R
Establish communication between the device and the dongle.
Turning ON the device
Refer to section "2.1 Switching Operations" and turn on the device.
Enabling the device connection (advertising mode)
1. With the device's power turned ON,
press and hold the device power button
for 2 seconds and then release.
Advertising mode is enabled when the LED
quickly flashes blue.
Connecting the device
1. When a connectable device is
nearby, click the Scan device
button.
This will start scanning for a
connectable device.
Select the ID that is on the seal included with the package at
the time of purchase.
The combo box shows the ID of the
connectable device.
Tip
After establishing dongle
communication from any port
The device is found
The device is not found