Jlinks HDMI-SW301 User manual

Operating Instructions
1
KEY FEATURES
 Select one of 3 different HDMI Signal input sources and switch to 1 HDMI display.
 Manual or with remote controller to select input signals.
 Supports 30/36bit deep color display.
 Supports High Definition Audio : Dolby TrueHD, DTS-HD Master Audio
 Auto Signal Enhancement feature can improve signal quality after long distance
transmission.
 Supports resolution up to1080p
 Easy to install and operate.
 Smart use: It can smartly choose the signal source with priority order
 Support 3Dvideo format
 No need DC power
HDMI-SW301
HDMI Switch

Operating Instructions
2
SPECIFICATIONS
Operating Temperature Range
-5 to +35 ℃ (+23 to +95 ℉ )
Operating Humidity Range
5 to 90%RH (No Condensation)
Input Video Signal
0.5-1.0 Volts P-P
Input DDCSignal
5 volts p-p(TTL)
SupportVideoformat
DTV/HDTV:1080P/1080i/720P/576P/576i/480P/480i
3D video
Support Video Color Format
xv-YCC/deep color 36bit
Support AudioFormat
DTS-HD Master Audio 、 Dolby true-HD etc.
Output Video
HDMI 1.3+HDCP 1.2
Data transfer speed rate
6.75Gbps(Maximum)
Power consumption
4watts(Maximum)
Transmission Distance
15m(Maximum) over standard HDMI cable/26AWG
Dimension (L×W×H)
115x62x25mm
Net Weight
208g
Gross Weight
500g
Gift box measurement
L20.5xW15xH5.7cm
Master carton measurement
L43*W32*H31cm 20PCS/CTN
Note: Specifications are subject to change without notice. Mass and dimensions are approximate.
1) Main Unit. Mini 3x1 HDMI switcher
2) Remote Controller.
3) Operating Instructions

Operating Instructions
3
PANEL DESCRIPTIONS
Left Panel Front Panel
Rear Panel
1) HDMI outputport
2) Powerinput
3) Indicator of Power input :When power adapter or a HDMI equipment is connected,the
corresponding LED lights.
4) Input Select Button:Manually select button to switch signal source
5) IR Receiver
6) Indicator of HDMI output. When a HDMI equipment is connected, the corresponding LED lights.
7) Indicator of HDMI Input. When a HDMI equipment is connected, the corresponding LED lights.
8) HDMI input ports
Connecting and Operating
1) Connect the HDMI signal sources(Such as PS3,STB etc) into HDMI input.
2) Connect the HDMI display device (such as :HD-LCD,HD-DLP) into HDMI output.
Attention:Insert/Extract cablegently.