JMTek BTR500 User manual

BTR500 Instrucon Manual
FEATURES:
1. Baery：150mAh 3.7V
2. Playme：full charged baery can work about 3-4 hours
3. Bluetooth distance：8-10M in open area
4.Bluetooth Version: V4.1
5. Illuminated LED feature on top of Receiver
OPERATION:
A long press of the power buon will turn on the speaker and put the speaker intopairing mode.
When waing for Bluetooth pairing ablue LED next tothe MicroUSB socket will flash at 0.5
second intervals.
Search for BTR500 on your device in the usual way and connect, once connected the blue LED will
light up and will flash at 1 second intervals when playing audio.
A long press of the power buon will turn the receiver off.
Keyboard Funcon:
Power key:
Short press and release:pause, play, answer the call
Long press:Power on/off, pause, play, answer, recall
Double press: recall the last dialed call in the phone that connected with receiver

Selfie key:
Short press and release:take photoin photomode or increase volume of media
Long press: release alarm when enable an drop funcon, need toconnect again
Volume” + “:
Short press and release:next and increase volume
Long press:increase volume
Volume” –“:
Short press and release:previous
Long press:decrease volume
CHARGING:
Plug the MicroUSB end of the charging cable intothe charging port of the speaker and then
connect the USB end of the charging cable tothe USB port of your PC or other USB power source.
The red LED will light up while charging (the small hole on the lecorner of the MicroUSB). The
red LED will turn off automacally when charging is complete. It is strongly recommended that
the receiver be fully charged before first use and aer long periods of inacvity. Do not
overcharge the baery.
PRECAUTIONS
Please only use the computer USB or the DC 5V power adaptor matching the Micro USB
interface tocharge. Only use quality cords and adaptors.
Please keep and use in normal environments. Exposure to extreme elements such as
extreme heat and cold, fire, excessive moisture, dust, or other extreme elements may
damage the unit. Do not touch with wet hands.
Keep debris or other items from blocking the speakers or from entering any of the ports.
Do not aempt to open, repair, or take apart the speaker. The speaker may be damaged
during that process.
If the speaker quality seems lessened, or a slight popping noise is heard, it may be due to
low baery. Please recharge the speaker.
This item is not meant for children.
TROUBLESHOOTING
No Sound
Make sure that the music player is working and that the speaker is charged.
Make sure the Bluetooth™ is paired tothe device you are aempng toplay. (It could
automacally pair with another familiar device within pairing distance.)
Make sure the BTR500 is in the proper mode.
Not charging
Check tomake sure that you are using the correct cable and that it is fully plugged intoboth the
device and the USB port that you are charging from. Also check tomake sure the PC or other USB
charger is turned on.

FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equip-
ment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction.