Johansson 6550A User manual

Ref.:6550A/6555A
 6556A/6557A
PROGRAMMABLEACTIVECOMBINERS
Instruction Manual
Features
Outdoor programmable combiner lter amplier for individual installations.
The active combiner is suitable for reception of different groups of channels
from different transmitters, especially in border zones.
• Active ltering and amplication of signal
• Models with 2 / 3 / 4 inputs and up to 6 clusters
• 1 to 7 channels bandwidth per cluster
• High selectivity lters
• Accurate equalization of levels
• Power supply included
• Programming via Control Unit through coaxial cable
• Easy programming

TechnicalSpecications
Reference 6550A 6555A
Nb of inputs 2 2
Inputs UHF UHF Bypass UHF UHF
Frequency range 470-862 MHz 470-862 MHz 470-862 MHz 470-862 MHz
Clusters 1 1 rejected 1 1
Bandwidth 8-56 MHz
(1 to 7 Ch.)
8-56 MHz
(1 to 7 Ch. rej)
8-56 MHz
(1 to 7 Ch.)
8-56 MHz
(1 to 7 Ch.)
Conguration of clusters 1 1 2
1
0
1
Gain 15 dB 15 dB
Gain adjustment 30 dB 30 dB
Noise gure 6 dB 6 dB
Max. input level 85 dBµV 85 dBµV
Max. output level* 80 dBµV 80 dBµV
Selectivity 20 dB / 10 MHz 20 dB / 10 MHz
Consumption 100 mA / 24 VDC
from included power supply
100 mA / 24 VDC
from included power supply
Dimensions 185 x 144 x 71 mm 185 x 144 x 71 mm
* -54 dB / IM3
Reference 6556A 6557A
Nb of inputs 3 4
Inputs UHF UHF
Frequency range 470-862 MHz 470-862 MHz
Clusters 4 6
Bandwidth 8-56 MHz (1 to 7 Ch.) 8-56 MHz (1 to 7 Ch.)
Conguration of clusters
Gain 15 dB 15 dB
Gain adjustment 30 dB 30 dB
Noise gure 6 dB 6 dB
Max. input level 85 dBµV 85 dBµV
Max. output level* 80 dBµV 80 dBµV
Selectivity 20 dB / 10 MHz 20 dB / 10 MHz
Consumption 150 mA / 24 VDC
from included power supply
150 mA / 24 VDC
from included power supply
Dimensions 185 x 144 x 71 mm 185 x 144 x 71 mm
* -54 dB / IM3
UHF1 UHF2 UHF3
4 0 0
3 1 0
2 1 1
2 2 0
UHF1 UHF2 UHF3 UHF 4
6 0 0 0
5 0 0 1
4 0 1 1
4 0 0 2
3 1 1 1
3 0 1 2
3 0 0 3
2 1 1 2
2 0 2 2

Mounting
• Install the antennas to the chosen transmitters / directions
• Connect the coax cables to the active combiner
• Mount the combiner on the mast with the 2 provided straps
• Connect the power supply , check if the LED is ON
• Push down the plastic cap which has to click on the xed part
• The active combiner is ready to be programmed (via Control Unit ref 6565 in option)
The active combiner can be mounted on a wall
• Remove the plastic cap.
• Remove the metal housing from the holder part and x it on the wall.
“click”
62 mm

81,7521QY)UDQNULMNODDQ%3RSHULQJH%HOJLXP
7(/)$;
ZZZMRKDQVVRQEH(PDLOVDOHV#MRKDQVVRQEH
3URGXFWVDUHVXEMHFWWRFKDQJHZLWKRXWQRWLFH
$SSOLFDWLRQ
 7KHFRQ¿JXUDWLRQRIWKHFOXVWHUVFKDQQHOVDQGOHYHOVDUHORFDOO\RUUHPRWHO\SURJUDPPHGYLD&RQWURO8QLW
WKURXJKFRD[LDOFDEOH
79
OHYHO
4XDOLW\
/(9(/
48$/,7<
&KDQQHO
6LJQDO
4XDOLW\
8+)
/('
9
&21752/
6,*1$/
&RQWURO8QLW
UHI
3RZHU6XSSO\
/('
8+)
8+)
8+)
Pwr 5V