John Lewis JLFFIN175 User manual

JLFFW175
JLFFIN175
Fridge-Freezer
Instruction manual

Safety information
It is most important that this instruction book should be retained with
the appliance for future reference. Should the appliance be sold or
transferred to another owner, or should you move house and leave the
appliance, always ensure that the book is supplied with the appliance in
order that the new owner can get to know the functioning of the
appliance and the relevant warnings.
These warnings have been provided in the interest of safety. You MUST
read them carefully before installing or using the appliance. If you are
unsure of the meanings of these warnings contact the John Lewis
branch from which you purchased the appliance.
In the interest of your safety and to ensure
the correct use, before installing and first
using the appliance, read this user manual
carefully, including its hints and warnings. To
avoid unnecessary mistakes and accidents, it
is important to ensure that all people using
the appliance are thoroughly familiar with its
operation and safety features. Save these
instructions and make sure that they remain
with the appliance if it is moved or sold, so
that everyone using it through its life will be
properly informed on appliance use and
safety.
For your own personnel safety and the
safety of your property please follow the
instructions and warnings provided in this
user guide. The manufacturer cannot be held
responsible for any damages caused by not
following these instructions.
Children and vulnerable
people safety
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible for
their safety.
Children should be supervised to ensure
that they do not play with the appliance.
• Keep all packaging well away from
children. There is risk of suffocation.
• If you are discarding the appliance pull the
plug out of the socket, cut the connection
cable (as close to the appliance as you
can) and remove the door in order to
prevent playing children from suffering an
electric shock or from closing themselves
inside.
• If this appliance which has a magnetic
door seal is replacing an older appliance
which has a spring lock (latch) on the
door or lid, please make sure that the
lock is made unusable before it is
discarded. This will prevent the danger of
a child becoming trapped inside.
General safety
Caution! Keep ventilation openings
clear of obstruction.
2

• The appliance is intended for keeping
foodstuff and/or beverages in a normal
household as explained in this instruction
booklet.
• Do not use a mechanical device or any
artificial means to speed up the thawing
process.
• Do not use other electrical appliances
(such as ice cream makers) inside of
refrigerating appliances, unless they are
approved for this purpose by the
manufacturer.
• Do not damage the refrigerant circuit.
• The refrigerant isobutane (R600a) is
contained within the refrigerant circuit of
the appliance, a natural gas with a high
level of environmental compatibility,
which is nevertheless flammable.
During transportation and installation of
the appliance, be certain that none of the
components of the refrigerant circuit
become damaged.
If the refrigerant circuit should become
damaged:
– avoid open flames and sources of
ignition
– thoroughly ventilate the room in which
the appliance is situated
• It is dangerous to alter the specifications
or modify this product in any way. Any
damage to the cord may cause a short-
circuit, fire and/or electric shock.
Warning! Any electrical component
(power cord, plug, compressor) must
be replaced Service Force agent.
1. Power cord must not be lengthened.
2. Make sure that the power plug is not
squashed or damaged by the back of
the appliance. A squashed or damaged
power plug may overheat and cause a
fire.
3. Make sure that you can come to the
mains plug of the appliance.
4. Do not pull the mains cable.
5. If the power plug socket is loose, do
not insert the power plug. There is a
risk of electric shock or fire.
6. You must not operate the appliance
without the lamp cover of interior
lighting.
• This appliance is heavy. Care should be
taken when moving it.
• Do not remove nor touch items from the
freezer compartment if your hands are
damp/wet, as this could cause skin
abrasions or frost/freezer burns.
• Avoid prolonged exposure of the
appliance to direct sunlight.
• Bulb lamps used in this appliance are
special purpose lamps selected for
household appliances use only. They are
not suitable for household room
illumination.
Daily Use
• Do not place hot items such as pans and
baking trays near the plastic components
of the appliance.
• Do not store flammable gas and liquid in
the appliance, because they may explode.
• Do not place food products directly
against the air outlet on the rear wall.
1)
• Frozen food must not be re-frozen once it
has been thawed out.
• Store pre-packed frozen food in
accordance with the frozen food
manufacturer's instructions.
1) If the appliance is Frost Free
3

• Appliance's manufacturers storage
recommendations should be strictly
adhered to. Refer to relevant instructions.
• Do not place carbonated or fizzy drinks in
the freezer compartment as it creates
pressure on the container, which may
cause it to explode, resulting in damage to
the appliance.
• Ice lollies can cause frost burns if
consumed straight from the appliance.
Care and cleaning
• Before maintenance, switch off the
appliance and disconnect the mains plug
from the mains socket.
• Do not clean the appliance with metal
objects.
• Do not use sharp objects to remove frost
from the appliance. Use a plastic scraper.
• Regularly examine the drain in the
refrigerator for defrosted water. If
necessary, clean the drain. If the drain is
blocked, water will collect in the bottom
of the appliance.
Installation
Important! For electrical connection
carefully follow the instructions given in
specific paragraphs.
• Unpack the appliance and check if there
are damages on it. Do not connect the
appliance if it is damaged. Report possible
damages immediately to the place you
bought it. In that case retain packing.
• It is advisable to wait at least four hours
before connecting the appliance to allow
the oil to flow back in the compressor.
• In order to prevent over heating there
must be adequate circulation around the
appliance.
• Please refer to the correct positioning and
location instructions that can be found in
the Installation section of this user guide.
• The appliance must not be located close
to radiators or cookers.
• Make sure that the mains plug is
accessible after the installation of the
appliance.
Service
• Any electrical work required to do the
servicing of the appliance should be
carried out by a qualified electrician or
competent person.
• This product must be serviced by an
authorised Service Centre, and only
genuine spare parts must be used.
Environment Protection
This appliance does not contain
gasses which could damage the
ozone layer, in either its refrigerant
circuit or insulation materials. The
appliance shall not be discarded
together with the urban refuse and
rubbish. The insulation foam contains
flammable gases: the appliance shall
be disposed according to the
applicable regulations to obtain from
your local authorities. Avoid
damaging the cooling unit, especially
at the rear near the heat exchanger.
The materials used on this appliance
marked by the symbol are
recyclable.
4

Contents
For the user
Safety information 2
Product description 6
Operation 7
Switching on 7
Switching off 7
Temperature regulation 7
First use 7
Cleaning the interior 7
Daily use 8
Freezing fresh food 8
Storage of frozen food 8
Thawing 8
Movable shelves 8
Positioning the door shelves 8
Removal of freezing baskets from the freezer 9
Helpful hints and tips 9
Normal Operating Sounds 9
Care and cleaning 11
Periodic cleaning 11
Defrosting of the refrigerator 11
Defrosting the freezer 12
What to do if… 13
Replacing the lamp 14
For the installer
Technical data 16
Installation 16
Positioning 16
Location 16
Electrical Connection 17
Permanent connection 18
Rear spacers 18
Levelling 18
Removing the shelf holders 18
Door reversibility 19
Repairs - after sales
service
20
Environmental concerns 21
Guide to use the
instruction
manual
The following symbols will be found
in the text to guide you throughout
the instructions:
Safety instructions
Hints and tips
Environmental information
5

Product description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
A
B
A - Refrigerator
B - Freezer
1. Top
2. Light box and temperature regulator
3. Glass shelves
4. Bottle rack
5. Cooling surface
6. Glass shelf
7. Defrost water drain
8. Salad/vegetable drawer
9. Rating plate
10. Quick freeze drawer
11. Storing compartments
12. Defrost water drain
13. Adjustable feet
14. Dairy compartment
15. Egg tray
16. Door shelf
17. Door gasket
18. Bottle shelf
19. Handles
20. Condenser
21. Defrost water outlet tube
22. Spacers
23. Evaporator tray
24. Compressor
25. Rollers
6

Operation
Switching on
Insert the plug into the wall socket.
Turn the Temperature regulator clockwise
to a medium setting.
Switching off
To turn off the appliance, turn the
Temperature regulator to the "O" position.
Temperature regulation
The temperature is automatically regulated.
To operate the appliance, proceed as
follows:
• turn the Temperature regulator toward
lower settings to obtain the minimum
coldness.
• turn the Temperature regulator toward
higher settings to obtain the maximum
coldness.
A medium setting is generally the
most suitable.
However, the exact setting should be
chosen keeping in mind that the
temperature inside the appliance depends
on:
• room temperature
• how often the door is opened
• the quantity of food stored
• the location of the appliance.
Important! If the ambient temperature is
high or the appliance is fully loaded, and the
appliance is set to the lowest temperatures,
it may run continuously causing frost to form
on the rear wall. In this case the dial must be
set to a higher temperature to allow
automatic defrosting and therefore reduced
energy consumption.
First use
Cleaning the interior
Before using the appliance for the first time,
wash the interior and all internal accessories
with lukewarm water and some neutral soap
so as to remove the typical smell of a brand-
new product, then dry thoroughly.
Important! Do not use detergents or
abrasive powders, as these will damage the
finish.
7

Daily use
Freezing fresh food
The freezer compartment is suitable for
freezing fresh food and storing frozen and
deep-frozen food for a long time.
To freeze fresh foods it is not necessary to
change the medium setting.
However, for a faster freezing operation,
turn the temperature regulator toward
higher settings to obtain the maximum
coldness.
Important! In this condition, the
refrigerator compartment temperature
might drop below 0°C. If this occurs reset
the temperature regulator to a warmer
setting.
Place the fresh food to be frozen on the top
compartment.
Storage of frozen food
When first starting-up or after a period out
of use, before putting the products in the
compartment let the appliance run at least 2
hours on the higher settings.
Important! In the event of accidental
defrosting, for example due to a power
failure, if the power has been off for longer
than the value shown in the technical
characteristics chart under "rising time", the
defrosted food must be consumed quickly
or cooked immediately and then re-frozen
(after cooling).
Thawing
Deep-frozen or frozen food, prior to being
used, can be thawed in the refrigerator
compartment or at room temperature,
depending on the time available for this
operation.
Small pieces may even be cooked still
frozen, directly from the freezer: in this case,
cooking will take longer.
Movable shelves
The walls of the refrigerator are equipped
with a series of runners so that the shelves
can be positioned as desired.
Important!
Do not move the glass shelf above the
vegetable drawer to ensure correct air
circulation
Positioning the door
shelves
To permit storage of food packages of
various sizes, the door shelves can be placed
at different heights.
8

To make these adjustments proceed as
follows:
gradually pull the shelf in the direction of the
arrows until it comes free, then reposition as
required.
Removal of freezing
baskets from the freezer
1
2
The freezing baskets have a limit stop to
prevent their accidental removal or falling
out. At the time of its removal from the
freezer, pull the basket towards yourself
and, upon reaching the end point, remove
the basket by tilting its front upwards.
At the time of putting it back, slightly lift the
front of the basket to insert it into the
freezer. Once you are over the end points,
push the baskets back in their position.
Helpful hints and tips
Normal Operating
Sounds
• You may hear a faint gurgling and a
bubbling sound when the refrigerant is
pumped through the coils or tubing. This
is correct.
• When the compressor is on, the
refrigerant is being pumped around and
you will hear a whirring sound and a
pulsating noise from the compressor. This
is correct.
• The thermic dilatation might cause a
sudden cracking noise. It is natural, not
dangerous physical phenomenon. This is
correct.
• When the compressor switches on or
switches off, you will hear a faint "click" of
the temperature regulator. This is correct.
Hints for energy saving
• Do not open the door frequently or leave
it open longer than absolutely necessary.
9

• If the ambient temperature is high and the
Temperature Regulator is set to low
temperature and the appliance is fully
loaded, the compressor may run
continuously, causing frost or ice on the
evaporator. If this happens, set the
Temperature Regulator towards a
warmer setting to allow automatic
defrosting and will therefore save in
electricity consumption.
Hints for fresh food
refrigeration
To obtain the best performance:
• do not store warm food or evaporating
liquids in the refrigerator
• do cover or wrap the food, particularly if
it has a strong flavour
• position food so that air can circulate
freely around it
Hints for refrigeration
Useful hints:
Meat (all types) : wrap in polythene bags and
place on the glass shelf above the vegetable
drawer.
For safety, store in this way only one or two
days at the most.
Cooked foods, cold dishes, etc.: these
should be covered and may be placed on
any shelf.
Fruit and vegetables: these should be
thoroughly cleaned and placed in the special
drawer(s) provided.
Butter and cheese: these should be placed in
special airtight containers or wrapped in
aluminium foil or polythene bags to exclude
as much air as possible.
Milk bottles: these should have a cap and
should be stored in the bottle rack on the
door.
Bananas, potatoes, onions and garlic, if not
packed, must not be kept in the refrigerator.
Hints for freezing
To help you make the most of the freezing
process, here are some important hints:
• the maximum quantity of food which can
be frozen in 24 hrs. is shown on the rating
plate;
• the freezing process takes 24 hours. No
further food to be frozen should be added
during this period;
• only freeze top quality, fresh and
thoroughly cleaned, foodstuffs;
• prepare food in small portions to enable it
to be rapidly and completely frozen and
to make it possible subsequently to thaw
only the quantity required;
• wrap up the food in aluminium foil or
polythene and make sure that the
packages are airtight;
• do not allow fresh, unfrozen food to
touch food which is already frozen, thus
avoiding a rise in temperature of the
latter;
• lean foods store better and longer than
fatty ones; salt reduces the storage life of
food;
• it is advisable to show the use by date on
each individual pack to enable you to keep
tab of the storage time.
Warning! Lolly ices, if consumed
immediately after removal from the
freezer compartment can cause
freezer burns.
Hints for storage of
frozen food
To obtain the best performance from this
appliance, you should:
10

• make sure that the commercially frozen
foodstuffs were adequately stored by the
retailer;
• be sure that frozen foodstuffs are
transferred from the foodstore to the
freezer in the shortest possible time;
• not open the door frequently or leave it
open longer than absolutely necessary.
• Once defrosted, food deteriorates rapidly
and cannot be refrozen.
• Do not exceed the storage period
indicated by the food manufacturer.
Care and cleaning
Caution! Unplug the appliance
before carrying out any maintenance
operation.
This appliance contains hydrocarbons
in its cooling unit; maintenance and
recharging must therefore only be
carried out by authorised technicians.
Periodic cleaning
The equipment has to be cleaned regularly:
• clean the inside and accessories with
lukewarm water and some neutral soap.
• regularly check the door seals and wipe
clean to ensure they are clean and free
from debris.
• rinse and dry thoroughly.
Important! Do not pull, move or damage
any pipes and/or cables inside the cabinet.
Never use detergents, abrasive powders,
highly perfumed cleaning products or wax
polishes to clean the interior as this will
damage the surface and leave a strong
odour.
Clean the condenser (black grill) and the
compressor at the back of the appliance
with a brush or a vacuum cleaner. This
operation will improve the performance of
the appliance and save electricity
consumption.
Important! Take care of not to damage
the cooling system.
Many proprietary kitchen surface cleaners
contain chemicals that can attack/damage
the plastics used in this appliance. For this
reason it is recommended that the outer
casing of this appliance is only cleaned with
warm water with a little washing-up liquid
added.
After cleaning, reconnect the equipment to
the mains supply.
Defrosting of the
refrigerator
Frost is automatically eliminated from the
evaporator of the refrigerator compartment
every time the motor compressor stops,
during normal use. The defrost water drains
out through a trough into a special container
at the back of the appliance, over the motor
compressor, where it evaporates.
11

It is important to periodically clean the
defrost water drain hole in the middle of the
refrigerator compartment channel to
prevent the water overflowing and dripping
onto the food inside. Use the special cleaner
provided, which you will find already
inserted into the drain hole.
Defrosting the freezer
A certain amount of frost will always form
on the freezer shelves and around the top
compartment.
Defrost the freezer when the frost layer
reaches a thickness of about 3-5 mm.
To remove the frost, follow the instructions
below:
• pull out the plug from the wall socket or
switch off the appliance
• remove any stored food, wrap it in
several layers of newspaper and put it in a
cool place
• remove the freezer drawers
• put insulating material around the
drawers, e.g. blankets or newspapers.
Defrosting can be accelerated by placing
bowls with hot water (not boiling) inside the
freezer.
• Loosen the drainage channel from its
resting position, push it in according to
the illustration and place it in the bottom
freezer drawer where water can collect
• carefully scrape off the ice when it starts
to thaw. Use a wood or a plastic scraper
• when all the ice has melted, clean and
wipe the cabinet dry, then put the
drainage channel back in place.
• switch on the cabinet and replace the
frozen foodstuff.
It is recommended to operate the
appliance at the highest position of
the thermostatic control for some
hours so that it can reach the
sufficient storing temperature as soon
as possible.
Important! Never use sharp metal tools to
scrape off frost from the evaporator as you
could damage it. Do not use a mechanical
device or any artificial means to speed up
the thawing process other than those
recommended by the manufacturer. A
temperature rise of the frozen food packs,
during defrosting, may shorten their safe
storage life.
12

What to do if…
Caution! Before troubleshooting,
disconnect the power supply.
Only a qualified electrician or
competent person must do the
troubleshooting that is not in this
manual.
Important! There are some sounds during
normal use (compressor, refrigerant
circulation).
Problem Possible cause Solution
The appliance is noisy. The appliance is not supported
properly.
Check if the appliance stands
stable (all the four feet should be
on the floor).
The compressor
operates continually.
The Temperature regulator may
be set incorrectly.
Set a warmer temperature.
The door is not closed correctly. Refer to "Closing the door".
The door has been opened too
frequently.
Do not keep the door open
longer than necessary.
The product temperature is too
high.
Let the product temperature
decrease to room temperature
before storage.
The room temperature is too
high.
Decrease the room temperature.
Water flows on the rear
plate of the
refrigerator.
During the automatic defrosting
process, frost defrosts on the
rear plate.
This is correct.
Water flows into the
refrigerator.
The water outlet is clogged. Clean the water outlet.
Products prevent that water
flows into the water collector.
Make sure that products do not
touch the rear plate.
Water flows on the
ground.
The melting water outlet does
not flow in the evaporative tray
above the compressor.
Attach the melting water outlet to
the evaporative tray.
There is too much frost
and ice.
Products are not wrapped
properly.
Wrap the products better.
The door is not closed correctly. Refer to "Closing the door".
The Temperature regulator may
be set incorrectly.
Set a higher temperature.
13

Problem Possible cause Solution
The temperature in the
appliance is too low.
The Temperature regulator may
be set incorrectly.
Set a higher temperature.
The temperature in the
appliance is too high.
The Temperature regulator may
be set incorrectly.
Set a lower temperature.
The door is not closed correctly. Refer to "Closing the door".
The product temperature is too
high.
Let the product temperature
decrease to room temperature
before storage.
Many products are stored at the
same time.
Store less products at the same
time.
The temperature in the
refrigeration is too high.
There is no cold air circulation in
the appliance.
Make sure that there is cold air
circulation in the appliance.
The temperature in the
freezer is too high.
Products are too near to each
other.
Store products so that there is
cold air circulation.
The appliance does not
operate.
The appliance is switched off. Switch on the appliance.
The mains plug is not connected
to the mains socket correctly.
Connect the mains plug to the
mains socket correctly.
The appliance has no power.
There is no voltage in the mains
socket.
Connect a different electrical
appliance to the mains socket.
Contact a qualified electrician.
The lamp does not
work.
The lamp is in stand-by. Close and open the door.
The lamp is defective. Refer to "Replacing the lamp".
If your appliance is still not working properly
after making the above checks, contact the
After Sales Centre.
Replacing the lamp
Caution! Disconnect the appliance.
1. Push the movable part to unhook the
lamp cover (1).
2. Remove the lamp cover (2).
3. Replace the lamp with one of the same
power and specifically designed for
domestic appliances only.
4. Install the lamp cover.
5. Connect the appliance.
6. Open the door. Make sure that the lamp
comes on.
12
Closing the door
1. Clean the door gaskets.
14

2. If necessary, adjust the door. Refer to
"Installation".
3. If necessary, replace the defective door
gaskets. Contact the Service Force
Centre.
15

Technical data
JLFFW175 JLFFIN175
Dimension
Height 1750 mm 1750 mm
Width 595 mm 595 mm
Depth 658 mm 658 mm
Rising Time 20 h 20 h
Voltage 230 V 230 V
Frequency 50 Hz 50 Hz
The technical information are situated in the
rating plate on the internal left side of the
appliance and in the energy label.
Installation
Read the "Safety Information"
carefully for your safety and correct
operation of the appliance before
installing the appliance.
Positioning
Install this appliance at a location where the
ambient temperature corresponds to the
climate class indicated on the rating plate of
the appliance:
Climate
class
Ambient temperature
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
Location
The appliance should be installed well away
from sources of heat such as radiators,
boilers, direct sunlight etc. Ensure that air
can circulate freely around the back of the
cabinet. To ensure best performance, if the
appliance is positioned below an
overhanging wall unit, the minimum distance
between the top of the cabinet and the wall
unit must be at least 100 mm . Ideally,
however, the appliance should not be
positioned below overhanging wall units.
Accurate levelling is ensured by one or more
adjustable feet at the base of the cabinet.
16

AB
min
100 mm
20 mm
Warning! It must be possible to
disconnect the appliance from the
mains power supply; the plug must
therefore be easily accessible after
installation.
Electrical Connection
Caution! Any electrical work
required to install this appliance
should be carried out by a qualified
electrician or competent person.
Warning! This appliance must be
earthed.
The manufacturer declines any
liability should these safety measures
not be observed.
Important! The wires in the mains lead are
coloured in accordance with the following
code:
1 2
3
4
5
1
Green and Yellow: Earth
3
Brown: Live
5
Blue: Neutral
As the colours of the wires in the mains lead
of this appliance may not correspond with
the coloured markings identifying the
terminals in your plug, proceed as follows:
1. Connect the wire coloured green and
yellow to the terminal marked either
with the letter “E“ or by the earth
symbol or coloured green and yellow.
2. Connect the wire coloured blue to the
terminal either marked with the letter
“N“ or coloured black.
3. Connect the wire coloured brown to
the terminal either marked with the
“L“ or coloured red.
4. Check that no cut, or stray strands of
wire is present and the cord clamp
4
is
secure over the outer sheath.
5. Make sure the electricity supply voltage
is the same as that indicated on the
appliance rating plate.
6. Switch on the appliance.
17

The appliance is supplied with a 13 amp plug
fitted
2
. In the event of having to change
the fuse in the plug supplied, a 13 amp ASTA
approved (BS 1362) fuse must be used.
Warning! A cut off plug inserted
into a 13 amp socket is a serious
safety (shock) hazard. Ensure that it is
disposed of safely.
Permanent connection
In the case of permanent connection it is
necessary that you install a double pole
switch between the appliance and the
electricity supply (mains), with a minimum
gap of 3mm between the switch contacts
and of a type suitable for the required load
in compliance with the current electrical
regulations.
The switch must not break the green and
yellow earth cable at any point.
Rear spacers
2
43
1
You can find the two spacers in the bag with
documentation.
Do these steps to install the spacers:
1. Release the screw.
2. Engage the spacer below the screw.
3. Turn the spacer to the right position.
4. Tighten again the screws.
Levelling
When placing the appliance ensure that it
stands level. This can be achieved by two
adjustable feet at the bottom in front.
Removing the shelf
holders
Your appliance is equipped with shelf
retainers that make it possible to secure the
shelves during transportation.
To remove them proceed as follows:
1. Move the shelf holders in the direction
of the arrow (A).
2. Raise the shelf from the rear and push it
forward until it is freed (B).
3. Remove the retainers (C).
18

A
B
C
Door reversibility
Warning! Before carrying out any
operations, remove the plug from the
power socket.
Important! To carry out the following
operations, we suggest that this be made
with another person that will keep a firm
hold on the doors of the appliance during
the operations.
To change the opening direction of the
door, do these steps:
1. Open the doors. Unscrew the middle
hinge (m2). Remove the plastic spacer
(m1).
m1 m2
m3 m4
m5
m6
2. Remove the doors.
3. Remove the spacer (m6) and move to
the other side of the hinge pivot (m5).
4. Unscrew the lower hinge (b1)
5. Remove the left-hand cover pins (b4)
and move to the other side.
6. Re-screw the lower hinge (b1) on the
opposite side.
7. Unscrew the lower hinge pivot (b2) and
the spacer (b3) and place them on the
opposite side.
19

8. Remove the stoppers (1) and move to
the other side of the doors.
1
9. Unscrew the upper hinge pivot (t1) and
screw it on the opposite side.
10. Remove the left-hand cover pin of the
middle hinge (m3,m4) and move to the
other side.
11. Fit the pin of the middle hinge (m5) into
the left-hand hole of the lower door.
12. Re-insert the lower door on the lower
hinge pivot (b2).
13. Fit the upper door on the upper hinge
pivot (t1).
14. Re-insert the upper door on the middle
hinge pivot (m5) slightly tilting both
doors.
15. Re-screw the middle hinge (m2). Do
not forget the plastic spacer (m1)
inserted under the middle hinge. Make
sure that the edges of the doors run
parallel to the side edge of the
appliance.
16. Reposition, level the appliance, wait for
at least four hours and then connect it
to the power socket.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly to
the cabinet. In that case, wait for the natural
fitting of the gasket.
In case you do not want to carry out the
above mentioned operations, contact the
nearest After Sales Service Force. The After
Sales Service specialist will carry out the
reversibility of the doors at your cost.
Repairs - after sales service
Your appliance comes with a three year
warranty. If it is not working correctly refer
to "Something not working". If a fault occurs
which you can not resolve through following
the advice and information contained within
this instruction manual, the next step is to
contact our extended warranty
administrators on:
0844 871 7771
They will give you details for your local
service engineer. Before calling out an
engineer, please ensure you have read the
details under the heading “Something not
working”.
20