List of contents
1 List of contents page 02
2 Tips on using the manual page 02
3 Sicherheitshinweise Seite 02
4 Warranty/identification page 03
5 Operation/maintenance/care page 04
6 Telefax-Vordruck page 08
Tips on using the manual
Congratulation on the purchase of this device. Please pay attention to the operating instructions,
to be able to use the handpiece effectively - about all - safety.
The symbols used in the manual have the following meanings:
Working and operating processes which must be observed to the letter to exclude any risk to
persons.
Working and operating processes which must be observed to the letter to avoid any damage to
the device.
Technical information to which the device operator must give special attention.
The illustrations and diagrams are numbered in sequence within each chapter. Some of these
illustrations have keys. References to illustrations within the text e. g. (5.1/2) have the following
meaning:
5.1 = Figure 5.1
2 = Position 2 in the key to the figure
Please feel free to call our customer service department at any time should you encounter techni-
cal problems which are not dealt with in this manual:
Telephon: +49 (0) 22 04 / 8 39 - 0
Telefax: +49 (0) 22 04 / 8 39 – 86
Internet: www.joke.de
Safety instructions
This device has been built according to the latest technical standards and generally accepted safety
regulations. Nevertheless, it can constitute danger to life and limb for operator or third parties and a
hazard to the device itself or other equipment during use.
1. Only use the device if in perfect working order and for its intended purpose. You must always pay
attention to the instruction manual and safety instructions therein and be aware of the risks! Repair
any faults which could affect the device’s safety immediately by yourself or have these repaired.
The unit is designed exclusively for grinding work with the tools listed and approved in the joke cata-
logue for Surface Finishing. Any other use will be deemed to be contrary to its intended purpose. The
manufacturer cannot be held liable for any resulting damages. The risk is borne solely by the user.
Correct use also includes compliance with the instruction manual and an observation of the care and
maintenance conditions.
2. Keep the instruction manual handy at the device’s place of use.
3. Pay attention to and observe generally applicable statutory and otherwise binding regulations
relating to accident prevention and environmental protection in addition to the information provided
in the instruction manual!
02
1
Important
Caution
2
3
Info
Important
