Jolly Mec FOGHET EVO User manual

SM098 EN REV01 2014_09
replace
FOGHET EVO
water
INSTALLATION, USE AND
MAINTENANCE MANUAL
To be kept by the purchaser
Wood operated water fireplace
FOGHET EVO

Dear Customer,
thank you for having chosen to heat and save with a Jolly Mec product. Please carefully read and keep this sheet
before using the equipment.
This sheet provides necessary information and suggestions on how to correctly install, use, clean and maintain
the product. Knowing and observing these instructions will allow you to fully and safely enjoy the potential your
equipment can offer you.

SM098 EN REV01 2014_09
3
ENGLISH
TABLE OF CONTENTS
CHAP.01 PREMISES...................................................................................................................................4
01.1 WARNINGS .................................................................................................................................................. 4
01.2 SYMBOLOGY............................................................................................................................................... 5
01.3 APPLIED STANDARDS ............................................................................................................................... 5
01.4 USE AND STORING OF THE INSTALLATION AND MAINTENANCE MANUAL........................................ 6
01.5 MANIFACTURER LIABILITY AND WARRANTY CONDITIONS .................................................................. 6
CHAP.02 ACCIDENT PREVENTION / SAFETY REGULATIONS..............................................................7
02.1 GENERAL CONSIDERATIONS ................................................................................................................... 7
02.2 SAFETY REGULATIONS FOR ROUTINE MAINTENANCE AND USE ....................................................... 7
02.3 SAFETY REGULATIONS FOR EXTRAORDINARY MAINTENANCE AND INSTALLATION ...................... 8
02.4 EQUIPMENT FOR OPERATORS AND MAINTENANCE PERSONNEL ..................................................... 9
02.5 RESIDUAL RISKS ........................................................................................................................................ 9
CHAP.03 HANDLING AND TRANSPORT................................................................................................ 10
03.1 RECEIVING GOODS.................................................................................................................................. 10
03.2 LIFTING AND TRANSPORT ...................................................................................................................... 10
CHAP.04 ECOLOGICAL REGULATIONS................................................................................................ 11
04.1 WASTE MATERIALS AND THEIR DISPOSAL .......................................................................................... 11
04.2 DISPOSAL OF THE MACHINE .................................................................................................................. 11
CHAP.05 DESCRIPTION..........................................................................................................................12
05.1 PRODUCT PRESENTATION ..................................................................................................................... 12
05.2 PRODUCT IDENTIFICATION .................................................................................................................... 13
CHAP.06 TECHNICAL DATA ...................................................................................................................14
06.1 HOMOLOGATION ...................................................................................................................................... 14
06.2 RECOMMENDED FUELS ......................................................................................................................... 15
06.3 COMPONENTS .......................................................................................................................................... 16
06.4 DIMENSIONS ............................................................................................................................................. 16
CHAP.07 POSITIONING AND CONNECTIONS FOR THE INSTALLER .................................................17
07.1 FLUE OR FUME EXHAUST SYSTEM ....................................................................................................... 17
07.2 INSTALLATION ROOM VENTILATION ..................................................................................................... 18
07.3 PREARRANGEMENT FOR CONNECTIONS AND AIR INLETS OF THE STOVE POSITIONED IN A CORNER ..... 19
07.4 PREARRANGEMENT FOR ELECTRICAL CONNECTIONS AND AIR INLETS WITH WALL INSTALLATION.... 20
07.5 EXAMPLE OF INSTALLED AND CLAD FIREPLACE ................................................................................ 22
07.6 CONTROL UNIT ELECTRICAL WIRING DIAGRAM ................................................................................. 23
07.7 HYDRAULIC KIT ........................................................................................................................................ 24
CHAP.08 USE AND MAINTENANCE FOR THE USER............................................................................26
08.1 CONTROL UNIT......................................................................................................................................... 26
08.2 WOOD FUNCTIONING .............................................................................................................................. 28
08.3 TIPS AND WARNINGS FOR THE USER.................................................................................................. 30
08.4 ORDINARY MAINTENANCE (by the costumer)......................................................................................... 31
08.5 SPECIAL MAINTENANCE ......................................................................................................................... 34
CHAP.09 FAULT DIAGNOSIS AND TROUBLESHOOTING....................................................................35
09.1 PROBLEMS................................................................................................................................................ 35
09.2 ALARM MESSAGES .................................................................................................................................. 36

4
CHAP.01 PREMISES
01.1 WARNINGS
• Familiarityandcompliancewiththeinstructionsgiveninthismanualwillensurequickinstallationandcorrectuseoftheappliance.
• Readthemanualattentivelybeforecommencinginstallation,andbecertaintofollowthedirectionsitcontains,otherwisethewar-
rantycouldbeinvalidatedandtheperformanceandsafetyoftheappliancejeopardized.
• Theinstallationmanualisanintegralpartoftheproductandmustbegiventotheuser.
• Itmustbekeptinasafeplaceandconsultedcarefully,asallofthewarningsprovideimportantinformationonsafetyduringinstal-
lation,useandmaintenance.
• Incorrectinstallationoftheappliancecouldcausedamageandinjurytopeopleoranimals,forwhichthemanufacturecannotnotbe
heldliable.
• InstallationshallbeperformedbyqualiedoperatorsinaccordancewiththeregulationsinforceintheCountryofinstallation.
• Themanufacturerdeclinesanycontractualornon-contractualliabilityfordamagescausedbyerrorsininstallationoruseofthe
applianceorfailuretofollowtheinstructionscontainedinthismanual.
• AllrightsonthereproductionofthistechnicalmanualareownedbyJollyMecCaminettiS.p.A.
• Thedescriptionsandillustrationsprovidedinthefollowingpublicationarenotbinding.
• JollyMecCaminettiS.p.Areservestherighttomakeanymodicationsthatmaybedeemedappropriate.
• ThismanualcannotbegiventothirdpartiesforperusalwithoutthewrittenpermissionofJollyMecCaminettiS.p.A
• Thetechnicaldirectionsforinstallationcontainedinthismanualshouldbeconsideredasbasicrequirements.Regulationsinsome
countriesmaybemorerestrictive;inthisinstance,complyfullywiththeregulationsprevailinginthecountryofinstallation(all laws
and local bylaws must be observed when installing and using the appliance, including those referring to national and
European standards).
• Neverusetheapplianceasanincinerator,orinwayotherthanthatforwhichitwasdesigned.Anyotheruseisdeemedimproper
andthereforedangerous.
• Donotusefuelsthatarenotrecommendedunderpenaltyofcancellationofthewarranty.
• Whentheapplianceisrunning,theglassandothervisiblepartsreachextremelyhottemperaturestothetouch;handlewithextreme
caretoavoidburns.
• Donotplacetheapplianceindirectcontactwithcombustiblematerials.
• Donotmakeanyunauthorisedmodicationtotheappliance.Anyunauthorisedmodicationwillautomaticallyinvalidatethewarranty
andreleasethemanufacturefromallliability.
• Useonlyoriginalsparepartsrecommendedbythemanufacturer.Originalsparepartsareavailablethroughauthorisedretailers,
authorisedAssistanceCentres,ordirectlyfromJollyMecCaminettiS.p.A.
• Acceptanceofthemachinebytheusermustbe“total”,includingthesoundlevelofoperation,comparabletoanelectricalappliance.
Complaintsforcharacteristicsnotindicatedinthismanualshallnotbeaccepted.

5
ENGLISH
01.2 SYMBOLOGY
In this manual, points of considerable importance are marked with the following symbology:
INSTRUCTION: Instructions regarding the correct use of the appliance.
WARNING This point is particularly important.
DANGER An important point regarding behaviour for preventing injury and damage to
materials is expressed.
01.3 APPLIED STANDARDS
All JOLLY MEC products are constructed according to the following directives:
• EU 305/2011 European construction products regulation.
• 2006/42/CE Machines.
• 2004/108/CE Electromagnetic compatibility (EMC).
• 2006/95/CE Low voltage (LVD) - electrical safety.
• 1999/5/CE Radio equipment and telecommunications terminal equipment and the mutual recognition of their
conformity
• 2011/65/EU (RoHs 2) Restriction of the use of certain hazardous substances in electrical and electronic equipment
And in compliance with the standards:
• CEI EN 61000-3-2 Electromagnetic compatibility (EMC) - Limits - Limits for harmonic current emissions (equipment input
current ≤ 16 A per phase).
• CEI EN 61000-3-3 Electromagnetic compatibility (EMC) - Limits. Limitation of voltage changes, voltage uctuations and
icker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not
subject to conditional connection.
• EN 55014-1 Electromagnetic compatibility. - Requirements for household appliances, electric tools and similar
apparatus - Emission
• EN 55014-2 Electromagnetic compatibility – Requirements for household appliances, electric tools and similar
apparatus - Immunity. Product family standard.
• EN 60335-1 Safety of household electrical appliances and similar products. - General safety regulations
• EN 60335-2-102 Safety of household electrical appliances and similar products. - Special regulations for appliances tted
with gas, diesel or solid fuel burners and electrical connections.
• EN 62233 Measurement methods for electromagnetic elds of electrical appliances for home use and similar
goods regarding human exposure.
• EN 50581 Technical Documentation For The Assessment Of Electrical And Electronic Products With Respect To
The Restriction Of Hazardous Substance
• UNI 7129 Domestic and similar gas systems powered by the distribution mains.
• UNI 10412-2 Hot water heating system - Safety requirements - Specic requirements for systems with domestic type
heating devices powered by solid fuel with built-in stove, with total re power not over 35 kW.
• UNI 10683 Heat generators operating with wood or other solid bio fuels - Installation requirements
• UNI EN 303-5 Heating boilers. - Heating boilers for solid fuels, manually and automatically stoked, nominal
heat output of up to 500 kW - Terminology, requirements, testing and marking.
• UNI EN 1443 Fireplaces - General requisites
• UNI EN 1856-1 Chimneys - Requirements for metal chimneys - System chimney products.
• UNI EN 1856-2 Chimneys. Requirements for metal chimneys - Metal ue liners and connecting ue pipes.
• UNI EN 13229 Insert appliances including open res red by solid fuels - Requirements and test methods
• UNI EN 13240 Roomheaters red by solid fuel - Requirements and test methods
• UNI EN 13384 Fireplaces - Thermal calculations and dynamic uid.
• UNI EN 14785 Residential space heating appliances red by wood pellets - Requirements and test methods
• UNI EN ISO 12100 Machine safety.