Jolly Mec TERMOJOLLY 80 EVO User manual

SM157 EN REV01 2020_01
INSTALLATION, USE AND
MAINTENANCE MANUAL
To be kept by the purchaser
Wood operated water system fireplace
TERMOJOLLY 80 EVO
TERMOJOLLY 80 EVO

Dear Customer,
thank you for having chosen to heat and save with a Jolly Mec product. Please carefully read and keep this sheet
before using the equipment.
This sheet provides necessary information and suggestions on how to correctly install, use, clean and maintain
the product. Knowing and observing these instructions will allow you to fully and safely enjoy the potential your
equipment can offer you.

SM157 EN REV01 2020_01 3
ENGLISH
TABLE OF CONTENTS
CHAP.01 PREMISES...................................................................................................................................4
01.1 WARNINGS .................................................................................................................................................. 4
01.2 SYMBOLOGY............................................................................................................................................... 5
01.3 APPLIED STANDARDS ............................................................................................................................... 5
01.4 USE AND STORING OF THE INSTALLATION AND MAINTENANCE MANUAL........................................ 6
01.5 MANUFACTURER’S LIABILITY AND WARRANTY CONDITIONS ............................................................. 6
CHAP.02 ACCIDENT PREVENTION / SAFETY REGULATIONS.............................................................. 7
02.1 GENERAL CONSIDERATIONS ................................................................................................................... 7
02.2 SAFETY REGULATIONS FOR ROUTINE MAINTENANCE AND USE ....................................................... 7
02.3 SAFETY REGULATIONS FOR EXTRAORDINARY MAINTENANCE AND INSTALLATION ...................... 8
02.4 EQUIPMENT FOR OPERATORS AND MAINTENANCE PERSONNEL ..................................................... 9
02.5 RESIDUAL RISKS ........................................................................................................................................ 9
CHAP.03 HANDLING AND TRANSPORT ................................................................................................ 10
03.1 RECEIVING GOODS.................................................................................................................................. 10
03.2 LIFTING AND TRANSPORT ...................................................................................................................... 10
CHAP.04 ECOLOGICAL REGULATIONS ................................................................................................11
04.1 DISPOSAL OF THE MACHINE .................................................................................................................. 11
CAP.05 DESCRIPTION........................................................................................................................... 12
05.1 PRODUCT PRESENTATION ..................................................................................................................... 12
05.2 PRODUCT IDENTIFICATION .................................................................................................................... 13
CAP.06 TECHNICAL DATA ...................................................................................................................14
06.1 HOMOLOGATION ...................................................................................................................................... 14
06.2 RECOMMENDED FUELS .......................................................................................................................... 15
06.3 COMPONENTS .......................................................................................................................................... 16
06.4 DIMENSIONS ............................................................................................................................................. 16
CHAP.07 POSITIONING AND CONNECTIONS FOR THE INSTALLER ................................................. 17
07.1 FLUE OR FUME EXHAUST SYSTEM ....................................................................................................... 17
07.2 INSTALLATION ROOM VENTILATION ..................................................................................................... 18
07.3 ASSEMBLY SEQUENCE FOR THE INSTALLER...................................................................................... 19
07.4 INSTALLATION CONFIGURATIONS......................................................................................................... 25
07.5 INSTALLING THE CLADDING: PRECAUTIONS ....................................................................................... 27
07.6 CONTROL UNIT ELECTRICAL WIRING DIAGRAM ................................................................................. 29
07.7 PREPARATION OF HYDRAULIC CONNECTIONS................................................................................... 30
CHAP.08 USE AND MAINTENANCE FOR THE USER............................................................................ 35
08.1 APPLIANCE START AND USE.................................................................................................................. 35
08.2 TIPS AND WARNINGS FOR THE USER................................................................................................... 37
08.3 ROUTINE MAINTENANCE ........................................................................................................................ 38
08.4 EXTRAORDINARY MAINTENANCE.......................................................................................................... 40
CHAP.09 FAULT DIAGNOSIS AND TROUBLESHOOTING.................................................................... 41
09.1 PROBLEMS................................................................................................................................................ 41

4
CHAP.01 PREMISES
01.1 WARNINGS
• Familiarityandcompliancewiththeinstructionsgiveninthismanualwillensurequickinstallationandcorrectuseoftheappliance.
• Readthemanualattentivelybeforecommencinginstallation,andbecertaintofollowthedirectionsitcontains,otherwisethewar-
rantycouldbeinvalidatedandtheperformanceandsafetyoftheappliancejeopardized.
• Theinstallationmanualisanintegralpartoftheproductandmustbegiventotheuser.
• Itmustbekeptinasafeplaceandconsultedcarefully,asallofthewarningsprovideimportantinformationonsafetyduringinstal-
lation,useandmaintenance.
• Incorrectinstallationoftheappliancecouldcausedamageandinjurytopeopleoranimals,forwhichthemanufacturecannotnotbe
heldliable.
• InstallationshallbeperformedbyqualiedoperatorsinaccordancewiththeregulationsinforceintheCountryofinstallation.
• Themanufacturerdeclinesanycontractualornon-contractualliabilityfordamagescausedbyerrorsininstallationoruseofthe
applianceorfailuretofollowtheinstructionscontainedinthismanual.
• AllrightsonthereproductionofthistechnicalmanualareownedbyJollyMecCaminettiS.p.A.
• Thedescriptionsandillustrationsprovidedinthefollowingpublicationarenotbinding.
• JollyMecCaminettiS.p.Areservestherighttomakeanymodicationsthatmaybedeemedappropriate.
• ThismanualcannotbegiventothirdpartiesforperusalwithoutthewrittenpermissionofJollyMecCaminettiS.p.A
• Thetechnicaldirectionsforinstallationcontainedinthismanualshouldbeconsideredasbasicrequirements.Regulationsinsome
countriesmaybemorerestrictive;inthisinstance,complyfullywiththeregulationsprevailinginthecountryofinstallation(all laws
and local bylaws must be observed when installing and using the appliance, including those referring to national and
European standards).
• Neverusetheapplianceasanincinerator,orinwayotherthanthatforwhichitwasdesigned.Anyotheruseisdeemedimproper
andthereforedangerous.
• Donotusefuelsthatarenotrecommendedunderpenaltyofcancellationofthewarranty.
• Whentheapplianceisrunning,theglassandothervisiblepartsreachextremelyhottemperaturestothetouch;handlewithextreme
caretoavoidburns.
• Attherstignitionyoumayencounterbadsmellsand/orsmokeduetotherstheatingofthepaint.Duringthisphase,youhaveto
airtheroomwheretheproductisinstalledandnotstaythereuntilthesmellsand/orsmokehavecompletelydisappeared.
• Donotplacetheapplianceindirectcontactwithcombustiblematerials.
• Donotmakeanyunauthorisedmodicationtotheappliance.Anyunauthorisedmodicationwillautomaticallyinvalidatethewarranty
andreleasethemanufacturefromallliability.
• Useonlyoriginalsparepartsrecommendedbythemanufacturer.Originalsparepartsareavailablethroughretailers,specialised
TechnicalServiceCenters,ordirectlyattheheadofceofJollyMecCaminettiS.p.A.
• Acceptanceofthemachinebytheusermustbe“total”,includingthesoundlevelofoperation,comparabletoanelectricalappliance.
Complaintsforcharacteristicsnotindicatedinthismanualshallnotbeaccepted.

ENGLISH
01.2 SYMBOLOGY
In this manual, points of considerable importance are marked with the following symbology:
INSTRUCTION: Instructions regarding the correct use of the appliance.
WARNING: This point is particularly important.
DANGER: An important point regarding behaviour for preventing injury and damage to
materials is expressed.
01.3 APPLIED STANDARDS
All JOLLY MEC products are constructed according to the following directives:
• EU 305/2011 European construction products regulation.
• 2006/42/CE Machines.
• 2014/30/UE Electromagnetic compatibility (EMC).
• 2014/35/UE Low voltage (LVD) - electrical safety.
• 2011/65/EU (RoHs2) Restriction of the use of certain hazardous substances in electrical and electronic equipment
• 2014/53/UE Radio Equipment
• 2014/68/UE Pressure Equipment (PED)
And in compliance with the standards:
• CEI EN 61000-3-2 Electromagnetic compatibility (EMC) - Limits - Limits for harmonic current emissions (equipment input
current ≤ 16 A per phase).
• CEI EN 61000-3-3 Electromagnetic compatibility (EMC) - Limits. Limitation of voltage changes, voltage uctuations and icker
in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject
to conditional connection.
• EN 55014-1 Electromagnetic compatibility. - Requirements for household appliances, electric tools and similar
apparatus - Emission
• EN 55014-2 Electromagnetic compatibility – Requirements for household appliances, electric tools and similar
apparatus - Immunity. Product family standard.
• EN 60335-1 Household and similar electrical appliances - Safety. General requirements.
• EN 60335-2-102 Household and similar electrical appliances. - Safety. Particular requirements for gas, oil and solid-fuel
burning appliances having electrical connections.
• EN 62233 Measurement methods for electromagnetic elds of household appliances and similar apparatus with
regard to human exposure.
• UNI 7129 Domestic and similar gas systems powered by the distribution mains.
• UNI 10412-2 Hot water heating system - Safety requirements - Specic requirements for systems with domestic type
heating devices powered by solid fuel with built-in replace, with total re power not over 35 kW.
• UNI 10683 Heat generators operating with wood or other solid bio fuels - Installation requirements.
• UNI EN 303-5 Heating boilers - Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of
up to 500 kW - Terminology, requirements, testing and marking.
• UNI EN 1443 Chimneys. General requirements.
• UNI EN 1856-1 Chimneys - Requirements for metal chimneys - System chimney products.
• UNI EN 1856-2 Chimneys. Requirements for metal chimneys - Metal ue liners and connecting ue pipes.
• UNI EN 13229 Insert appliances including open res red by solid fuels. Requirements and test methods.
• UNI EN 13240 Roomheaters red by solid fuel. - Requirements and test methods.
• UNI EN 13384 Chimneys. Thermal and uid dynamic calculation methods - Chimneys serving more than one heating
appliance.
• UNI EN 14785 Residential space heating appliances red by wood pellets. - Requirements and test methods.
• UNI EN ISO 12100 Safety of machinery - General principles for design - Risk assessment and risk reduction.
5