JONATHAN Y JYL3087 User manual

WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
Model# JYL3087
Product Dimensions: 20"L X 11W X 66"H
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of
electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the
plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully
inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Lamp base 1X E Lamp body 3X
B Lamp body 1X F Socket 3X
C Lamp body 2X G Shade 3X
D Lamp body 1X

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT
THERE IS LED 4-WATT BULB IN THE BOX
Step 1
Step 2
Step 3
Make sure all parts could be aligned before assemble
Insert the bulb(G1) into the socket(E1).
Put the light on a level surface to check
Do not rotate lamp body too hard avoid base screw broken
Then screw the Glass shade(F1)onto the
if everything is stable.
Screw the Lamp body (B) onto the Lamp base(A)
socket(E1).
Screw the Lamp body (C) onto the Lamp body (B)
Insert the bulb(G2) into the socket(E2).
Screw the Lamp body (C1) onto the Lamp body (C)
Then screw the Glass shade(F2)onto the
Screw the Lamp body (D) onto the Lamp body (C1)
socket(E2).
Be careful not to twist the power cord and tighten securely
Insert the bulb(G3) into the socket(E3).
Then screw the Glass shade(F3)onto the
ENJOY YOUR LAMP socket(E3).