JONATHAN Y Transitional JYL9045A User manual

Model# JYL9045A
Product Dimensions: Ø15.75" X 27"H
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce
the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in
the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
PIECE DESCRIPTION PICTURE QUANTITY
Short Tube Base
Shade
Cap
Long Tube
Socket Assembly
PIECE DESCRIPTION PICTURE QUANTITY
Bulb
1X
C
B
AE
D
F
G
1X
1X
2X
1X
1X
1X

Step 1 Step 2 Step 3
Make sure all parts could be aligned before assemble Insert the bottom nipple of the Shade(B) into the Insert the bulb(D) into the socket.
Do not rotate lamp body too hard avoid base screw broken Short Tube(C) and rotate it till tight. Put the light on a level surface to check
Insert the Long Tube(F) into the Base(G) and rotate it till tight. Place the Cap(A) onto the Shade(B) and rotate it if everything is stable.
Insert the Socket Assembly (E) into the Long Tube(F). clockwise till tight.
Insert the Short Tube(C) into the Socket Assembly (E) and
rotate it till tight.
Be careful not to twist the power cord and tighten securely
PLEASUE USE TYPE"B" BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED MAX 9-WATT
THERE ARE 2 X 4W LED BULBS IN THE BOX.
ENJOY YOUR LAMP
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
1
2
3
E
F
G
C
A
B
C
D