JONATHAN Y USA1004 User manual

INSTRUCTIONS
MUSHROOM LAMP


WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN
INSTALLED.
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an
appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the
methods appropriate to the material. Avoid the use of chemicals and household cleaners as they
may damage the finish.
CARE AND MAINTENANCE
NOTICE & IMPORTANT SAFETY INSTRUCTIONS
-Please make sure that you have all parts indicated before you begin assembly of this item
-This item should be assembled on a soft surface to prevent scratching the finish during assembly
-To reduce the risk of fire, electrical shock or injury to persons or property, please follow this guide for
safe use and installation
*This lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk
of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. Do not attempt to disregard this safety feature.

1.
2.
Illuminate the LED.
Shade the Light.
3.
4.
Rotate and Lock.
Brighten Your World!
Get ready to brighten up your space!
First, install the LED bulb into the socket by
gently twisting it until it’s snug. Make sure
not to over-tighten it or you might break
the bulb.
Now that your LED is securely in
place, it’s time to add the shade.
Simply slide it over the base and let
it rest comfortably around the bulb.
Make sure the tabs on the shade
align with the slots on the base.
Don’t worry if it’s a little crooked
at rst - we’ll x that in the next
step.
This is where the magic happens!
Rotate the shade clockwise until
you feel it snap into place. That
means it’s securely locked and
won’t wobble or fall o. If it’s not
straight, you can adjust it until it’s
just right.
Congratulations, you’re done!
You’ve successfully installed your
light bulb into your new lamp.
Flip the switch and bask in the
glow of your newly illuminated
space!
WARNING
FOR USE WITH LED BULBS ONLY!
Incandescent bulbs may cause
melting, bodily injury, re or
death. Keep out of reach
from children.
NOTE:
When it comes time to replace
your bulb, use a dimmable E26
LED 4W bulb.


WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN
INSTALLED.
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an
appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the
methods appropriate to the material. Avoid the use of chemicals and household cleaners as they
may damage the finish.
CARE AND MAINTENANCE
NOTICE & IMPORTANT SAFETY INSTRUCTIONS
-Please make sure that you have all parts indicated before you begin assembly of this item
-This item should be assembled on a soft surface to prevent scratching the finish during assembly
-To reduce the risk of fire, electrical shock or injury to persons or property, please follow this guide for
safe use and installation
*This lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk
of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. Do not attempt to disregard this safety feature.