JONATHAN Y JYL5045A B User manual

WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR
OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
CARE
AND
MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to
the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
Model# JYL5045A B
Product Dimensions: 15"L X 15"W X 28.25"H
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below
for safe use and installation
*Th t l fl ibl bl d f thi l t b l d
*The external flexible cable or cord of this lamp cannot be replaced;
If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of
electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the
plug if it still does not fit contact a qualified electrician Never use with an extension cord unless the plug can be
PIECE
DESCRIPTION
PICTURE
QUANTITY
PIECE
DESCRIPTION
PICTURE
QUANTITY
plug
,
if
it
still
does
not
fit
,
contact
a
qualified
electrician
.
Never
use
with
an
extension
cord
unless
the
plug
can
be
fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
PIECE
DESCRIPTION
PICTURE
QUANTITY
PIECE
DESCRIPTION
PICTURE
QUANTITY
A Lamp base 1X E Shade 1X
B Saddle 1X F Finial 1X
C Socket 1X G Bulb 1X
D Harp 1X

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If
any part is missing or damaged, do not attempt to assemble the product.
PREPARATION
Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR CFL BULB MAX 23-WATT OR LED BULB MAX 12-WATT
THERE IS LED 9-WATT BULB IN THE BOX
11123 11123
Step 1 Step 2 Step 3
Insert the Harp (D) into the Saddle (B). Insert the bulb(G） into the socket(C). Put the light on a level surface to check
Put the shade(E) on the Harp(D), then if everything is stable.
ti ht th Fi i l (F)i t th H (D)
tighten the Finial
(
F
)
into the Harp
(
D
)
ENJOY YOUR LAMP