Identifying the parts
(with Part Numbers for customer replaceable items)
Mixer Body
Handle
Mains Plug and Lead
Beaters (JEA98BT, each)
Dough Hook with Collar (JEA98HC)
Dough Hook without Collar (JEA98HN)
Left Hand Attachment Receptacle
Right Hand Attachment Receptacle
Eject Button
OFF (0) / Speed Selector (1-6) Switch
Turbo Button
Storage Clip for Beaters and Dough Hooks
Before first use
1. Remove any labels and/or swing tickets.
2. Pull the Storage Clip to remove from the Mixer Body . Wash the
Beaters and Dough Hooks and with liquid detergent and
warm water, rinse and dry. These parts are dishwasher safe.
3. Wipe the outside of the Mixer Body with a cloth dampened slightly
with liquid detergent and warm water, then dry with a dry cloth.
◆DO NOT IMMERSE ANY PART OF THE MIXER BODY IN WATER.
How to use (continued)
◆Do not use any utensils such as knives, forks or spoons in the bowl
and do not reach into the bowl when the mixer is in use. Do not allow
the Mixer Body to come into contact with the ingredients.
◆The Turbo Button may be used to increase the mixer speed for short intervals.
◆Do not operate the Mixer for more that 5 minutes continuously at a
time, after which a 20-minute cooling period should be allowed.
6. When mixing is completed, return the OFF/Speed Selector Switch
to the “0” (OFF) position and unplug the Mains Plug .
◆If necessary, when the mixer is off you may scrape any excess food mix
from the mixing attachments with a wooden or plastic spatula.
7. Grasp the mixing attachments with one hand, close to the Mixer Body
, to avoid getting food mix on your hand. Press the Eject Button with
your other hand, to release the mixing attachments for cleaning.
◆The Eject Button cannot be operated unless the OFF/Speed Selector
Switch is in the “0” (OFF) position; this is a safety feature. Do not
attempt to pull mixing attachments out of their receptacles.
Mixing Tips
◆Do not over mix beyond the recommended times in your recipe.
◆Fold in dry ingredients at the lowest speed, until only just combined.
◆Refrigerated ingredients, such as butter, cheese and eggs, should
be allowed to reach room temperature before mixing.
◆An approximate guide to the function of the speed
settings is given in the following table:
1 - 2 3 - 4 5-6
Starting mixing
Kneading dough
Folding in dry ingredients
Mixing dry ingredients
Combining ingredients
Preparing batters
and mixes
Making cake and
biscuit mixes
Creaming butter and sugar
Whipping butter, cream,
aerated mixtures
Mashing potato
Beating eggs
Beating icing sugar
Beating puddings
Cleaning
1. Always return the OFF/Speed Selector Switch to the “0” (OFF)
position and unplug the Mains Plug before cleaning.
2. Wash the mixing attachments with liquid detergent and warm
water, rinse and dry. These parts are dishwasher safe.
3. Wipe the outside of the Mixer Body and the Mains Lead with a cloth dampened
slightly with liquid detergent and warm water, then dry with a dry cloth.
◆DO NOT IMMERSE ANY PART OF THE MIXER BODY IN WATER.
4. When all parts are dry, push fit the Storage Clip to attach to the underside
of the Mixer Body and use to safely store attachments / / .
Cautions
Before using the Hand Mixer, the following basic
precautions should always be followed:
Read all instructions before use.
Ensure that your home electrical supply corresponds to the
requirements of the appliance - see “Specications”.
Always check that the control is OFF before connecting the
Hand Mixer plug into a mains socket.
Do not connect the Mains Plug into a mains socket, or use the
appliance, if your hands or the appliance are wet.
To disconnect, turn the control to OFF, then remove plug from
the mains socket.
Unplug from mains socket while not in use, before changing
accessories or approaching parts which move in use.
The Mains Lead should be positioned so as not to cause an
obstruction or to overhang the edge of the surface, where it
could accidentally be snagged or pulled by children.
Never leave the unit unattended when it is operating.
DO NOT IMMERSE ANY PART OF THE HAND MIXER IN
WATER.
Should the Hand Mixer accidentally fall into water, unplug
immediately and do not use; contact Judge Customer Services
at the address given in the warranty section.
Do not switch on or attempt to operate the Hand Mixer if it
appears to be faulty in any way. Never attempt to make any
repair to the Hand Mixer yourself - contact Judge Customer
Services at the address given in the warranty section.
Do not place the Hand Mixer or Mains Lead close to a heat
source.
Inserting the Beating attachments
1. Set the OFF/Speed Selector Switch to the “0” (OFF)
position and unplug the Mains Plug .
2. Insert the first of the Beaters into either Attachment
Receptacle /on the underside of the Mixer Body . Rotate
the attachment until it clicks into place, then push home.
3. Repeat step 2 with the second Beater .
Inserting the Dough Hooks
How to use
1. Follow the instructions for inserting the required mixing attachments (above).
2. Place the ingredients to be mixed into a bowl or other suitable container.
3. Ensure that the OFF/Speed Selector Switch is set to the “0” (OFF) position.
4. Plug the Mains Plug into a mains socket.
5. Lower the mixing attachments until they are well covered by the ingredients
to be mixed and move the OFF/Speed Selector Switch to the required
speed setting of “1” to “6” to mix the ingredients according to your recipe.
◆It is recommended to start mixing at the lowest speed
and gradually increase the speed, if required.
1. Set the OFF/Speed Selector Switch
to the “0” (OFF) position and
unplug the Mains Plug .
2. Insert the Dough Hook with Collar
into the Right Hand Attachment
Receptacle on the underside of the
Mixer Body . Rotate the attachment
until it clicks into place, then push home.
3. Insert the Dough Hook without Collar
into the Left Hand Attachment
Receptacle on the underside of the
Mixer Body . Rotate the attachment
until it clicks into place, then push home.