Jumpking JKLCOV1017C4 User manual

Model# JKLCOV1017C4
10FT x 17FT OVAL LEVELING
TRAMPOLINE & ENCLOSURE
WARNING: Read these assembly instructions carefully
before attempting to assemble or use this product. Keep
this user guide in a safe place for future reference.
Got a Problem building your trampoline?
Please contact us at [email protected]
Jumpking 3970 Lindbergh Drive Addison, TX 75001
®
200
90

If you have questions after
reading this manual, please email
us at [email protected].
Trained technicians will provide
immediate assistance.
More detailed instructions on
assembling your trampoline
will be available on
www.jumpking.com
in the Manual and Assembly
section.
10FT x 17FT OVAL LEVELING
TRAMPOLINE & ENCLOSURE
PART LIST 16
18
44
45
45

20090

please visit our website at
www.jumpking.com.
5

Please visit our website at
www.jumpking.com
Please visit our website at www.jumpking.com
Please visit our website at www.jumpking.com
200 90

If you have questions after reading this manual,
please visit our websites at www.jumpking.com.

37
20090

Top rail with “A” Marking
Part number: ML1017A
W leg “K” Marking
(Corner Legs)
Part number: ML1017K
Leg extension with
Reduction “L” Marking
for Upper level (Corner Legs)
29 1/4” Length / 44mm Thickness
Part number: ML1017L
Leg extension with
Reduction “M” Marking
for Lower level (Corner
Legs) 15 1/8” Length / 44mm
Thickness
Part number: ML1017M
Leg extension with
Reduction “N” Marking
for Upper level (Middle
Legs) 32 1/2” Length / 57mm
Thickness
Part number: ML1017N
Curve leg extension
with “O” Marking
for Upper level (Middle
Legs) 57mm
Thickness
Part number: ML1017O
Leg center for Upper
level “P” Marking
(Middle Legs) 40 3/4” Length
57mm Thickness
Part number: ML1017P
Part number: HWSTS
Part number: SP10 Part number: HWSPT
Part number:
PADOVML1017JP8-13BO
Part number: ML1017SCS
Top rail with “C”
Marking
Part number: ML1017C
Top rail with “D”
Marking
Part number: ML1017D
Top rail with “E”
Marking
Part number: ML1017E
Top rail with “B” Marking
(Note: Connector “F” marking
is already pre-assembled on these
Top rails)
Part number: ML1017B
T-connector with
attachment “F” marking
(Note: These T-Connector are already
pre-assembled on Top rails “B” marking)
Part number: ML1017F
T-connector with
attachment “G” marking
Upper level - Right
Part number: ML1017G
Leg center for Lower
level “S” Marking
(Middle Legs) 51 1/2” Length
57mm Thickness
(*Note: Part No. 20 is already
Pre-assembled)
Part number: ML1017S
XPE Foam
(already inserted)
6” Length / 70mm Outside Diameter
(*Note: These foams are already
Pre-assembled on parts “R”and “S”
marking)
Part number: ML1017XPE6
Leg extension with
Reduction “Q” Marking
for Lower level
(Middle Legs) 18 1/4” Length / 57mm
Thickness
Part number: ML1017Q
T-connector with
attachment “H” marking
Upper level - Left
Part number: ML1017H
T-connector with
attachment “I” marking
Lower level - Right
Part number: ML1017I
T-connector with
attachment “J” marking
Lower level - Left
Part number: ML1017J
Curve leg extension
with “R” Marking
for Lower level (Middle
Legs) 57mm Thickness
(*Note: Part No. 20 is already
Pre-assembled)
Part number: ML1017R
27 28 29 30
(Included 2 for spare use)
3
3
90
Straps for
Stitched Bed
Part number: ML1017SCS
3
Part number: ML1017SCS
Part number:
BEDOVML101790-10
(Note: Foam sleeves are
already pre-assembled
on bottom enclosure poles)
3
Cabiner for Straps
for Stitched Bed
3.5” Springs for
Cabiner & Straps
10” Springs Spring Pulling Tool Frame Pad for
Upper Level(Black color)
Part number:
PADOVML1017JP8-13BO
Part number:
E32B1013P
Frame Pad for
Lower Level(Orange color)
Enclosure Bottom
Poles

31 32 33 34 35
10
30
100
90
80 70
20
20
50
50
50
40
40
30
10
10
10
1010
10
10
36 37
1 set
39
38 40
41
46
17
42 43 44 45
10
1 set
(Note: Foam sleeves are
already pre-assembled
on top enclosure poles)
(Note: These Foam sleeves
are already pre-assembled
on enclosure poles) (Note: These Caps are
already pre-assembled
on top enclosure poles)
Part number:
E32C1013P7
Part number:
HWROPE-S8
Part number:
SETG4-OVML1017JP8
Part number:
SETG4-OVML1017JP8
Part number:
SETG4-OVML1017JP8 Part number:
ACC-BSKMESH
Part number:
ACC-TGTGAME Part number:
ACC-SAG
Part number: FSBLK44
Part number:
HWEPC10.5-32
Enclosure Top
Poles
Rope / Cords for
Netting
G3 FRP Poles
Green Marking
(Upper Level)
G3 FRP Poles
Red Marking
(Lower Level)
G3 Connecting Bent
Poles Yellow Marking Basketball Mesh
Game
Target Game Black Screws for
Accessories Games
1
Part number:
ACC-APN
Inflater with
Plastic Needle
1
Part number:
ACC-BSKB14
Inflatable Ball
4
Part number:
ACC-MBTG
Mini balls for
Target Game
Enclosure Foam
Sleeves Enclosure Pole Caps
10.5-32 Grey color
(Note: These Caps are
already pre-assembled
on top enclosure poles)
Part number:
HWEPC11.2-32
Enclosure Pole Caps
11.2-32 Black color
Part number:
USERS MANUAL
User Manual &
Warning Placard
Part number:
NETOVML1017-JP8
Enclosure Netting

Lay out the Top rails and Corner legs parts in groups:
1) Top rail with B marking: 2 pcs,
2) T-connector with F marking: 4 pcs (already pre-assembled to Top rail B),
3) W leg (Corner legs) with K marking: 2 pcs,
4) Leg extension with reduction for upper level (corner legs) L marking: 4 pcs.
Lay out the Top rails with A marking: 1 pc.
Connect both legs with Top rail A marking.
Lay out the Top rails with C marking: 2 pcs.
Insert Top rail B marking.
Assemble Corner Legs for upper level x 2:
18
B
B
BB
F
F
F
K
K
L
L
L
L
L
L
B
F
F
A
K
K
K
L
F
F F F
BB
L
L
L
L
A
K
K
C
F
F F FC
*Note: Plastic
Mallet may be
required to
push parts in
(Not included).
*Note: Plastic
Mallet may be
required to
push parts in
(Not included).

C
C
Lay out the T-connector with G and H markings:
Lay out the Upper level middle leg parts in group:
1) Leg extension with Reduction “N” Marking for Upper level: 2 pcs,
2) Curve leg extension with “O” Marking for Upper level: 2 pcs,
3) Leg center for Upper level “P” Marking: 1 pc,
4) Self tapping screw (Part 21): 4 pcs.
Assemble Upper Middle Leg inserting 4 pcs Self Tapping Screws.
Insert T-connectors G marking (Right side) and H marking (Left side).
19
BB
L
LLL
A
K
P
O
NN
O
K
G H
FF F
F
G
H
*Note: Plastic
Mallet may be
required to
push parts in
(Not included).
NN
OO
P
Part 21

D D
Lay out the T-connector with I and J markings:
Insert T-connectors I (Right side) and J (Left side) marking.
I
I
J
J
20
*Note: Plastic
Mallet may be
required to
push parts in
(Not included).
*Note: At this stage of assembly,
the leg will not be touching the floor
(This is normal).
Insert remaining side of the
leg into Connector G marking
using 1 self tapping screw.
G
H
Insert one side of the leg into
Connector H marking
using 1 self tapping screw.
Please ensure to indicate to
insert the screw into one side
first then go to other side.
Insert Top rail D marking: 2 pcs.
*Note: Plastic
Mallet may be
required to
push parts in
(Not included).
*Note: Plastic
Mallet may be
required to
push parts in
(Not included).