Jumpking RECTANGULAR 12 User manual

RECTANGULAR 12
JUMPKING

Jumpking Studsmattor Sweden AB is not liable or bound by warranty if these instructions are not adhered to during
assemble, or if the equipment is modied without written consent from the manufacturer.
Copyright © 2020 Jumpking Studsmattor Sweden AB
Jumpking Studsmattor Sweden AB can accept no responsibility for possible errors in catalogues, brochures and
other printed material. Jumpking Studsmattor Sweden AB reserves the right to alter its products without notice.
This also applies to products already on order provided that such alterations can be made without sub sequential
changes being necessary in specications already agreed.
All rights reserved.
All other trademarks are the properties of their respective owners.

Jumpking Studsmattor Sweden AB is not liable or bound by warranty if these instructions are not adhered to during
assemble, or if the equipment is modied without written consent from the manufacturer.
Copyright © 2020 Jumpking Studsmattor Sweden AB
Jumpking Studsmattor Sweden AB can accept no responsibility for possible errors in catalogues, brochures and
other printed material. Jumpking Studsmattor Sweden AB reserves the right to alter its products without notice.
This also applies to products already on order provided that such alterations can be made without sub sequential
changes being necessary in specications already agreed.
All rights reserved.
All other trademarks are the properties of their respective owners.
3
For information regarding care and maintenance, visit your local Jumpking website.
≥0.5 M
MAX
140 KG
3

4 JK-R12-A1
4R12_A2

4 JK-R12-A1
5
ASSEMBLE THE CORNER
SECTIONS
5

6 JK-R12-A1
x4
(box 2) x8
(box 1)
x8
(box 1)
x4
(box 1)
x2
(box 2)
x2
(box 2)
x16
(box 1)
Marked “B”
Marked “A”
Marked “D”
6R12_A2

6 JK-R12-A1
x4
(box 2) x8
(box 1)
x8
(box 1)
x4
(box 1)
x2
(box 2)
x2
(box 2)
x16
(box 1)
Marked “B”
Marked “A”
Marked “D”
7
x2
Marked “A”
Marked “A”
Marked “B”
Marked “B”
1
1
7

7
Marked “D”
Marked “D”
Marked “B”Marked “C”
x2
2
8R12_A2

7
Marked “D”
Marked “D”
Marked “B”Marked “C”
x2
8 JK-R12-A1
2x
x4
2
3
9

9
x4
3
1 cm
PRESS DOWN
PULL
1
2
4
10 R12_A2

9
x4
3
1 cm
PRESS DOWN
PULL
1
2
9
x4
3
2x
5
11

12 R12_A2

11
ASSEMBLE THE FRAME
13

12 JK-R12-A112 JK
x2 x2
x2
(box 2) x2 (box 2)
Marked “E”
Marked “C”
14 R12_A2

12 JK-R12-A112 JK
x2 x2
x2
(box 2) x2 (box 2)
Marked “E”
Marked “C”
3131
1
Marked “E”
Marked “B”
Marked “B”
1
15

14 JK-R12-A1
Marked “C”
Marked “C”
2
En: The slightly convex side should point outwards
Sv: Den något konvexa sidan ska peka utåt
No: Den litt konvekse siden skal peke utover
Dk: Den let konvekse side skal pege udad
Fi: Hieman kuperan puolen tulee osoittaa ulospäin
2
16 R12_A2

14 JK-R12-A1
Marked “C”
Marked “C”
2
En: The slightly convex side should point outwards
Sv: Den något konvexa sidan ska peka utåt
No: Den litt konvekse siden skal peke utover
Dk: Den let konvekse side skal pege udad
Fi: Hieman kuperan puolen tulee osoittaa ulospäin
16 JK-R12-A116 JK-R12-A1
4
Marked “E”
Marked “B”
Marked “B”
3
17

18 R12_A2

18
ATTACH THE STITCHED BED
19

x72
(box 1)
x1
(box 2)
19 JK-R12-A1
20 R12_A2