Juna JAUX_BT-01 User manual

Audio player for CAR
JAUX_BT-01 Model:
JAUX_BT-01_MMI_2G
INSTALLATION MANUAL
1. INTRODUCTION ...................................................................
2. RECOMMENDATIONS .........................................................
3. SCHEME OF CONNECTIONS .............................................
4. BASIC TECHNICAL PARAMETERS ....................................
5. ELEMENTS SET ....................................................................
Content
ul. Zgorzelicka 34 , 97-200 Tomaszow Mazowiecki POLAND
JuNa PPHU Manufacturer
2
2
4
5
5

1. INTRODUCTION
ul. Zgorzelicka 34 , 97-200 Tomaszow Mazowiecki POLAND
JuNa PPHU Manufacturer
Module JAUX_BT-01 is a modern microprocessor which it allows you to
add a new feature of the car by an additional line input audio and streaming audio
from mobile devices via BT Audi equipped with audio-visual MMI 2G.
The module allows you to connect most external audio devices which have
analogue output or BT.
The use of so-called connections Plug & Play allows for quick and easy way
connection to the car.
2. RECOMMENDATIONS
Copyright
All assembly and operating instructions are protected by copyright. Distributing
documentation via print or online media is only allowed with the prior consent of
JUNA electronics.
Important
Please read installation manual very careful and keep it in right way. During
installation, pay attention to all relevant aspects related to safety of installation and
use of the device.
The priority during the design and production of all devices by JUNA electronics
company is security and service comfort. It has been achieved by
applying the modern techniques of design and production processes of electronic
devices.
Module should be installed in technical workshops by qualified personnel or
by people who have experience in this type of installations. Installation of devices by
not qualification people can cause injury to persons or damage to property.
2

3
2.2 RECOMMENDATIONS
It is recommended keep to the general safety rules and pay attention for any
threat that can cause of damage to the vehicle.
We advice to mount device in safety place, where it is not exposed for moisture,
water or too high temperatures.
Device should not be installed in places where it could difficult safe driving or
operating efficiency of other units installed in vehicle.
The devices can be connected only to 12V. Modules can't be used in vehicles with
24V and higher voltage.
Please note that most of our devices are based on software that may require an
update. That's why you should always mount the device in easily available place in
the vehicle.
In some countries it may be necessary to check the legal provisions before
installation and startup of the device. In the interest of high quality and development
of our products, JUNA Electronics reserves the right to make technical changes.
In the case of a warranty claim, the device should be sent back to the seller in
original packaging with a detailed description of the problem with attached
purchase invoice.
Warranty claims as well as exploitation rights expire due:
A) Not authorized changes in devices or accessories, which have not been approved
or have not been provided by the manufacturer or his partners.
B) Opening the device's box.
C) Yourself repair the device.
D) Improper use / improper operation of the device
E) Mechanical damage
F) Flooding with water or other liquids

ul. Zgorzelicka 34 , 97-200 Tomaszow Mazowiecki POLAND
JuNa PPHU Manufacturer
3. SCHEME OF CONNECTIONS
JAUX_BT-01
Audio IN
RL
The system
MMI MOST
Power
system
MMI 12V
4
5
6
3
2
1
7
5
An exemplary connection method using the connection of the terminals CD
1. Turn off the ignition and the system MMI.
2. Connect the plug of fiber optic cluster and plug of electrical cable wiring.
Point and
3. Disconnect fiber optic plug from CD and connect it to fiber optic cluster.
Point
4. Connect second plug of fiber optic cluster to socket in CD. Point
5. Disconnect supply socket from CD and connect it to socket in
JAUX_BT-01 cable wiring. Point
6. Connect a supply plug form JAUX_BT-01 cable wiring to CD. Point
7. Connect any audio source to CINCH socket. Point
8. Turn on the ignition and the system MMI.
9. Push SOURCE button on control panel and select CD in order to display
available devices. Our device is visible as 6-disc CD changer.
1
7
2
6
5
3
4
Antenna bluetooth
NOTE: DO N OT C ONNEC T
Another cable when it is not possible
to use cable Plug & Play.
Audio IN
RL
Antenna bluetooth
NOTE: DO NOT CONNECT
+12V
GROUND
Red
Black or Brown
4

4. BASIC TECHNICAL PARAMETERS
ul. Zgorzelicka 34 , 97-200 Tomaszow Mazowiecki POLAND
JuNa PPHU Manufacturer
5. ELEMENTS SET
1. Control unit
2. Connection cable
3. Fiber optic splitter MOST
5
- JAUX_BT-01
- W-AUX101
- K-SW101
1. Power supply voltage
2. Power consumption with active Bluetooth
3. Power consumption without active Bluetooth
4. Resting current
5. Communication and control
6. Housing
7. Dimensions
8. Weight
- 12V
- 88mA
- 78mA
- 2,4mA
- MOST bus
- Metal
- 62mm x 92mm x 25mm
- 157g
W-AUX101
K-SW101
JAUX_BT-01