Juna JRDAB-02 Installation guide

www.juna.pl
ul. Zgorzelicka 34 , 97-200 Tomaszow Mazowiecki POLAND
JuNa PPHU Manufacturer
DAB+/DAB Radio for CAR
JRDAB-02 Model:
JRDAB-02_C_V3.0_CAN
To start listening of digital radio stations from DAB/DAB+ radio receiver,
press the MEDIA button on control panel and select MDI from display
by touch screen. Fig.1
WARNING! JRDAB -02 device is controlled from RNS control panel buttons
and touch screen.
2.Start Up
1
2
Fig.1
1.Introduction
JRDAB-02 device is a DAB/DAB+ radio receiver. It is designed
to receive digital radio stations in vehicle equipped with digital
sound system. JRDAB-02 supports the "following service"
function.
QUICK MANUAL
RNS 510

3.Selecting and changing
In order to select next or previous stations press or from
display using touch screen.
To select station from list press “WYBÓR” button, then press label with
chosen station.
1
3
2
4.Searching process
2
1
1. First press “WYBOR” button, then press SCAN button. Fig.4 and Fig.5
There are three possibilities for scan process:
www.juna.pl
ul. Zgorzelicka 34 , 97-200 Tomaszow Mazowiecki POLAND
JuNa PPHU Manufacturer
WARNING! At first start up of device run a SCAN function to search new
stations and add them to list.
Fig.3
Fig.2
Fig.4
Fig.3
Fig.2
Fig.5

www.juna.pl
ul. Zgorzelicka 34 , 97-200 Tomaszow Mazowiecki POLAND
JuNa PPHU Manufacturer
2
1
1
Warning! When received station has poor quality Signal, sound can
disappear for short moments or completely.
2. First press “DODATKI” button, then press SCAN button. Fig.6
3. It is the fastest way to start SCAN process. Only press knob
located on right side of control panel. Fig.7
Fig.6
Fig.7