Juna JAUX-01 User manual

Audio player for CAR
JAUX-01 Model:
JAUX-01_MMI_2G
INSTALLATION MANUAL
1. INTRODUCTION .....................................................................
2. RECOMMENDATIONS ...........................................................
3. SCHEME OF CONNECTIONS ...............................................
4. BASIC TECHNICAL PARAMETERS ......................................
5. ELEMENTS SET .....................................................................
Content
ul. Zgorzelicka 34 , 97-200 Tomaszow Mazowiecki POLAND
JuNa PPHU Manufacturer
2
2
4
5
5
FAQ

1. INTRODUCTION
ul. Zgorzelicka 34 , 97-200 Tomaszow Mazowiecki POLAND
JuNa PPHU Manufacturer
JAUX-1 module is a modern microprocessor device which expand audio car
systems of additional audio line input in Audi with MMI 2G car.
This device gives a possibility to connect external audio devices with analog
output. There is adopted Plug&Play connection system that allow easy installation in
vehicle.
2. RECOMMENDATIONS
Copyright
All assembly and operating instructions are protected by copyright. Distributing
documentation via print or online media is only allowed with the prior consent of
JUNA electronics.
Important
Please read installation manual very careful and keep it in right way. During
installation, pay attention to all relevant aspects related to safety of installation and
use of the device.
The priority during the design and production of all devices by JUNA electronics
company is security and service comfort. It has been achieved by
applying the modern techniques of design and production processes of electronic
devices.
Module should be installed in technical workshops by qualified personnel or
by people who have experience in this type of installations. Installation of devices by
not qualification people can cause injury to persons or damage to property.
2

2.2 RECOMMENDATIONS
It is recommended keep to the general safety rules and pay attention for any
threat that can cause of damage to the vehicle.
We advice to mount device in safety place, where it is not exposed for moisture,
water or too high temperatures.
Device should not be installed in places where it could difficult safe driving or
operating efficiency of other units installed in vehicle.
The devices can be connected only to 12V. Modules can't be used in vehicles with
24V and higher voltage.
Please note that most of our devices are based on software that may require an
update. That's why you should always mount the device in easily available place in
the vehicle.
In some countries it may be necessary to check the legal provisions before
installation and startup of the device. In the interest of high quality and development
of our products, JUNA Electronics reserves the right to make technical changes.
In the case of a warranty claim, the device should be sent back to the seller in
original packaging with a detailed description of the problem with attached
purchase invoice.
Warranty claims as well as exploitation rights expire due:
A) Not authorized changes in devices or accessories, which have not been approved
or have not been provided by the manufacturer or his partners.
B) Opening the device's box.
C) Yourself repair the device.
D) Improper use / improper operation of the device
E) Mechanical damage
F) Flooding with water or other liquids
3

ul. Zgorzelicka 34 , 97-200 Tomaszow Mazowiecki POLAND
JuNa PPHU Manufacturer
3. SCHEME OF CONNECTIONS
JAUX-01
Audio IN
RL
The system
MMI MOST
Power
system
MMI 12V
4
5
6
3
2
1
7
5
1. Turn off the ignition and the system MMI.
2. Connect the plug of fiber optic cluster and plug of electrical cable wiring.
Point and
3. Disconnect fiber optic plug from CD and connect it to fiber optic cluster.
Point
4. Connect second plug of fiber optic cluster to socket in CD. Point
5. Disconnect supply socket from CD and connect it to socket in
JAUX-01 cable wiring. Point
6. Connect a supply plug form JAUX-01 cable wiring to CD. Point
7. Connect any audio source to CINCH socket. Point
8. Turn on the ignition and the system MMI.
9. Push SOURCE button on control panel and select CD in order to display
available devices. Our device is visible as CD7-AUX or 01-AUX – depending
on whether the car is equipped with an additional CD.
1
7
2
6
5
3
4
4

4. BASIC TECHNICAL PARAMETERS
ul. Zgorzelicka 34 , 97-200 Tomaszow Mazowiecki POLAND
JuNa PPHU Manufacturer
1. Supply voltage
2. Current consumption in active state
3. Current consumption in standby mode
4. Input Audio Stereo
5. Communication and control
6. Housing
7. Dimensions
8. Weight
5. ELEMENTS SET
1. Control unit
2. Connection cable
3. Fiber optic splitter MOST
- 12V
- 72mA
- 20mA
- 1Vpp
- MOST bus
- Metal
- 92mm x 62mm x 25mm
- 155g
- JAUX-01
- W-AUX101
- K-SW101
5
JAUX-01 W-AUX101
K-SW101