Jupiter WAVELINE JFL700WD User manual

Specifications subject to change without notice
www.JUPITERmusic.com
Owner's Manual
THE WAVELINE™ FLUTE
JFL700W_owner's manual.indd 1-2 2019/3/21 上午11:01

The Waveline™ Flute Owner’s Manual>>>1
Contents
JFL700WD Flute
1. Assembly 1
2. Disassembly 2
3. Inspection & Maintenance 3
JFL700WE/WRE Flute
1. Assembly 5
2. Disassembly 8
3. Inspection & Maintenance 8
4. Optional Waveline™ Flute
Extension Kit-JJFLH-700WX 10
5. How to use the Waveline™ Flute
Extension Kit 11
Step 1.
Hold the Waveline bowjoint.
Insert headjoint into the
Waveline bowjoint using a
gentle twisting motion
Step 2.
Insert the Waveline bow
headjoint assembly into the
bodyjoint using a gentle
twisting motion.
Assembly
1
JFL700WD Flute
Flute Case
Cleaning Rod
Acrylic Flute Stand Beaded Cleaning Swab
Cleaning
Swab
Polishing
Cloth
Accessory Compartment
JFL700W_owner's manual.indd 3-1 2019/3/21 上午11:01

The Waveline™ Flute Owner’s Manual>>>32<<<The Waveline™ Flute Owner's Manual
1. How to clean the Waveline bowjoint
Insert the beaded cleaning swab through the
Waveline bowjoint assembly to remove excess
moisture.
2. How to clean the inner tubes (headjoint,
bodyjoint, and footjoint)
Pull one corner of the swab through the
end of the cleaning rod. Wrap the remaining
cloth around the cleaning rod.
Insert the cleaning swab through the
headjoint, bodyjoint, and footjoint to
remove excess moisture.
Inspection & Maintenance
3
Step 3.
Adjust the lip plate so the
embouchure hole is in line
with the C# key on the
bodyjoint.
Step 4.
When not playing your flute place on
the acrylic flute stand included with your
instrument.
Disassembly
2
Step 1.
While holding the headjoint remove it from
the Waveline bowjoint with a gentle twisting
motion.
Step 2.
Hold the bodyjoint and remove it from the
Waveline bowjoint with a gentle twisting
motion.
JFL700W_owner's manual.indd 2-3 2019/3/21 上午11:01

The Waveline™ Flute Owner’s Manual>>>54<<<The Waveline™ Flute Owner's Manual
Step 1.
Hold the barrel at the key
post using the thumb and
forefinger.
Step 2.
Connect the footjoint to the
bodyjoint using a gentle
twisting motion. Avoid
depressing the keys during
assembly.
Assembly
1
JFL700WE/WRE Flute
Flute Case
Accessory Compartment
Cleaning Rod
Acrylic Flute Stand Beaded Cleaning Swab
Cleaning Swab
Polishing
Cloth
3. How to clean/polish the flute´s surface
Wipe the instrument´s surface after playing
with a soft polishing cloth. When wiping,
hold the instrument carefully as to not
damage delicate key mechanisms or pads.
JFL700W_owner's manual.indd 4-5 2019/3/21 上午11:01

The Waveline™ Flute Owner’s Manual>>>76<<<The Waveline™ Flute Owner's Manual
Step 6.
When not playing your flute place on
the acrylic flute stand included with your
instrument.
Step 3.
Insert headjoint into the
Waveline bowjoint using a
gentle twisting motion.
Step 4.
Insert the Waveline bow headjoint
assembly into the bodyjoint using a gentle
twisting motion. Adjust the lip plate so the
embouchure hole is in line with the C# key on
the bodyjoint.
Step5.
The specially engraved alignment indicators
located on the headjoint and bodyjoint
ensure correct assembly and optimum
position placement.
JFL700W_owner's manual.indd 6-7 2019/3/21 上午11:01

The Waveline™ Flute Owner’s Manual>>>98<<<The Waveline™ Flute Owner's Manual
2. How to clean the inner tubes (headjoint,
bodyjoint, and footjoint)
Pull one corner of the swab through the
end of the cleaning rod. Wrap the remaining
cloth around the cleaning rod.
Insert the cleaning swab through the
headjoint, bodyjoint, and footjoint to
remove excess moisture.
3. How to clean/polish the flute´s surface
Wipe the instrument´s surface after playing
with a soft polishing cloth. When wiping,
hold the instrument carefully as to not
damage delicate key mechanisms or pads.4.
Disassembly
2
Step 1.
While holding the headjoint remove it from
the Waveline bowjoint with a gentle twisting
motion.
Step 2.
Hold the bodyjoint and remove it from the
Waveline bowjoint with a gentle twisting
motion.
Inspection & Maintenance
3
1. How to clean the Waveline bowjoint
Insert the beaded cleaning swab through
the Waveline bowjoint assembly to remove
excess moisture.
JFL700W_owner's manual.indd 8-9 2019/3/21 上午11:01

The Waveline™ Flute Owner’s Manual>>>1110<<<The Waveline™ Flute Owner's Manual
1. Remove the Waveline
bowjoint and headjoint
2. Insert the extension barrel.
The specially engraved alignment indicators
located on the headjoint and bodyjoint ensure
correct assembly and optimum position
placement.
How to Use the Waveline™
Flute Extension Kit
5
Optional Waveline™ Flute
Extension Kit-JJFLH-700WX
4
Your JFL700WE/WRE can easily be changed
into a full scale flute with a standard straight
headjoint. All you need is the JJFLH-700WX
Extension Kit.
The Waveline™ Flute Extension Kit contains
the following accessories:
JUPITER Waveline™ Flute Extension Barrel
JUPITER Straight Headjoint with .925 Sterling
Riser
JUPITER Flute Case
JUPITER Flute Zippered Case Cover
JFL700W_owner's manual.indd 10-11 2019/3/21 上午11:01

The Waveline™ Flute Owner’s Manual>>>1312<<<The Waveline™ Flute Owner's Manual
3. Insert the straight headjoint. Your extended
JFL700WE/WRE is now ready to play!
4. From now on you can use your extended
JFL700WE/WRE as a regular straight
flute. Simply remove the straight headjoint
and footjoint (the extension barrel stays
in the flute) and it will fit perfectly in your
JUPITER flute case and case cover.
JFL700W_owner's manual.indd 12-13 2019/3/21 上午11:01