JVA ZLM4 User manual

ZLM4 User ManUaL
JVA TECHNOLOGIES
www.jva-fence.com

Page 2 © JVA Technologies Pty. Ltd. www.jva-fence.com
Contents
CONTENTS
1 Quick Start Guide ................ 6
1.1 Default Input Output Configuration . . . . . . 6
1.2 Default Configuration . . . . . . . . . . . . . 6
1.3 Wiring up your ZLM4 . . . . . . . . . . . . .7
1.4 Jumpers . . . . . . . . . . . . . . . . . . .8
1.5 Frequently Used LCD Keypad Commands . . . . 9
2 Introduction...................10
3 FeaturesandBenets ........... 14
3.1 More Features . . . . . . . . . . . . . . . 16
4 Constraints ...................17
5 Specications ..................18
6 Equipment Requirements/Options ...20
6.1 Requirements . . . . . . . . . . . . . . . . 20
6.2 Options . . . . . . . . . . . . . . . . . . . 20
7 Description ....................21
7.1 Front Panel Status Lights. . . . . . . . . . 21
7.2 Status Light Codes . . . . . . . . . . . . . 22
7.3 Front Panel LCD Display . . . . . . . . . . 23
7.3.1 Disarmed . . . . . . . . . . . . . . . . . . 23
7.3.2 Armed . . . . . . . . . . . . . . . . . . . 23
7.3.3 Alarms . . . . . . . . . . . . . . . . . . . 24
7.4 Keypad (Optional) . . . . . . . . . . . . . . 24
7.5 Internal Beeper/Keypad Beeper . . . . . . . 24
7.6 Arm input and magnetic key fob . . . . . . . 24
7.7 Gate Input (control input 2) . . . . . . . . . 25
7.8 Group Simultaneous Pulse Feature . . . . . 25
7.9 Standby Battery . . . . . . . . . . . . . . 25
8 Controlling your ZLM4 ..........26
8.1 Control Arbitration . . . . . . . . . . . . . 26
8.2 Magnetic proximity switch . . . . . . . . . . 26

Page 3© JVA Technologies Pty. Ltd. www.jva-fence.com JVA ZLM4 Manual
Contents
8.3 PC Control . . . . . . . . . . . . . . . . . 27
8.4 Web Server . . . . . . . . . . . . . . . . . 27
8.5 Keypad . . . . . . . . . . . . . . . . . . . 27
8.6 Controlling the ZLM4 using the Keypad . . . 27
8.6.1 Keypad Versions. . . . . . . . . . . . . . . 27
8.6.2 Keypad Status Display. . . . . . . . . . . . 28
8.6.3 Arming/Disarming Using the Keypad . . . . . 28
8.6.4 When an Alarm Occurs . . . . . . . . . . . 29
8.6.5 To Silence an Alarm . . . . . . . . . . . . . 29
8.6.6 To Clear Alarm Memory . . . . . . . . . . . 29
8.6.7 Changing the PIN Number . . . . . . . . . . 29
8.6.8 Standby Battery . . . . . . . . . . . . . . 30
8.6.9 Internal Beeper/Keypad Beeper . . . . . . . 30
8.6.10 ZLM4 Relevant Keypad Codes . . . . . . . . 30
9 Installation ...................32
9.1 Installation Steps . . . . . . . . . . . . . 32
9.3 Fence Terminals . . . . . . . . . . . . . . . 34
9.4 Control, Power and IO Terminals . . . . . . 35
10 Wiring Diagrams ................ 38
10.1 Standalone fence configurations . . . . . . 38
10.2 Low Voltage Zoning System . . . . . . . . . 40
10.3 Keypad Bus Wiring. . . . . . . . . . . . . . 41
10.4 Example group wiring diagram . . . . . . . . 41
11 Technical Information............42
11.1 LCD Error Messages . . . . . . . . . . . . 42
11.2 Programming Options . . . . . . . . . . . . 42
11.2.1 Enter Programming Mode . . . . . . . . . . 42
11.2.2 To exit programming mode . . . . . . . . . . 42
11.2.3 Changing the installer PIN . . . . . . . . . 43
11.2.4 Changing an Option . . . . . . . . . . . . . 43
11.2.5 Programmable Options Table . . . . . . . . 44
11.3 Programming Options in Detail. . . . . . . . 46
11.3.1 Zone 1 Fence Voltage Alarm Level (01xx#) . . 46
11.3.2 Zone 2 Fence Voltage Alarm Level (02xx#) . . 46

Page 4 © JVA Technologies Pty. Ltd. www.jva-fence.com
Contents
11.3.3 Zone 3 Fence Voltage Alarm Level (03xx#) . . 46
11.3.4 Zone 4 Fence Voltage Alarm Level (04xx#) . . 46
11.3.5 Missed Pulse Count (06xx#). . . . . . . . . 46
11.3.6 Battery Alarm Voltage (07x#) . . . . . . . . 47
11.3.7 Siren On Time (08x#) . . . . . . . . . . . . 47
11.3.8 Siren Off Time (09x#) . . . . . . . . . . . . 48
11.3.9 Siren Cycles (10x#) . . . . . . . . . . . . . 48
11.3.10 Input Type (11x#) . . . . . . . . . . . . . . 49
11.3.11 Input 2 Function (12x#) . . . . . . . . . . . 49
11.3.12 Gate Delay (13x#) . . . . . . . . . . . . . . 49
11.3.13 Chime mode (14x#) . . . . . . . . . . . . . 49
11.3.14 Binary Options (16x#) . . . . . . . . . . . . 50
11.3.15 Auto Re-Arm time (20x#) . . . . . . . . . . . 51
11.3.16 Relay Functions. . . . . . . . . . . . . . . 51
11.3.17 Group Mode (26x#) . . . . . . . . . . . . . 53
12 Z-Series Keypads................55
12.1 PTE0210 LCD Keypad . . . . . . . . . . . . 55
12.2 PTE0230 Touch Keypad . . . . . . . . . . . 56
12.3 LCD Keypad Operation . . . . . . . . . . . . 57
12.3.1 Wiring up your Z-Series LCD Keypad . . . . . 57
12.3.2 Keypad status LEDs . . . . . . . . . . . . . 57
12.3.3 Arming/Disarming Using the Keypad . . . . . 57
12.3.4 Menus . . . . . . . . . . . . . . . . . . . 57
12.3.5 Keypad Status Display. . . . . . . . . . . . 58
12.3.6 Configuring the Keypad . . . . . . . . . . . 58
12.4 To Exit Keypad Programming . . . . . . . . . 60
12.5 Connecting Multiple Keypads . . . . . . . . 60
12.6 Keypad Configuration Notes . . . . . . . . . 61
12.7 Summary Of Keypad Functions . . . . . . . . 62
12.8 Touch Keypad Operation . . . . . . . . . . . 64
12.8.1 Screens . . . . . . . . . . . . . . . . . . 64
12.8.2 Home Screen . . . . . . . . . . . . . . . . 64
12.8.3 Alarm Screen . . . . . . . . . . . . . . . . 65
12.8.4 Settings Screen . . . . . . . . . . . . . . 66
12.8.5 Events Screen . . . . . . . . . . . . . . . 70

Page 5© JVA Technologies Pty. Ltd. www.jva-fence.com JVA ZLM4 Manual
Contents
12.8.6 Zones and Zone Details Screen . . . . . . . 71
12.8.7 Program Devices Screen. . . . . . . . . . . 72
13 Appendices .................... 74
13.1 Appendix A . . . . . . . . . . . . . . . . . 74
13.2 Appendix B . . . . . . . . . . . . . . . . . 75

Quick Start Guide
Page 6 © JVA Technologies Pty. Ltd. www.jva-fence.com
1 QUICK START GUIDE
contained in this document.
1.1 DEFAULT INPUT OUTPUT CONFIGURATION
Figure 1 below shows the inputs and outputs for the ZLM4 low voltage
monitor.
Default Input Output Conguraon
1.2 DEFAULT CONFIGURATION
1.
2.
3.

Page 7
Quick Start Guide
© JVA Technologies Pty. Ltd. www.jva-fence.com JVA ZLM4 Manual
4.
5.
6.
7.
to switch for a loop 4 fence alarm.
1.3 WIRING UP YOUR ZLM4

Quick Start Guide
Page 8 © JVA Technologies Pty. Ltd. www.jva-fence.com
1.4
device to defaults. These are explained in the table below.
JUMPER FUNCTION
J3
er over both pins.
J4
programmable op
faults on power up.
If the energiser needs to be de
completed powering up and the
Energiser will be reset to default
J9 Inhibits the onboard
beeper
placed over 1 pin.

Page 9
Quick Start Guide
© JVA Technologies Pty. Ltd. www.jva-fence.com JVA ZLM4 Manual
1.5
Arm/Disarm [User PIN][#]
[User PIN][#]
[Installer PIN][*] [0] [#]
Exit Programming [*] [#]
[User PIN][*][1][0][#]
number up to 15
[User PIN][*][1][x][#]
Disarm all Zones [User PIN][*][2][0][#]
[User PIN][*][2][x][#]
[*] [1] [#]

Introduction
Page 10 © JVA Technologies Pty. Ltd. www.jva-fence.com
2 INTRODUCTION
mean business.
react.
the fence.
Patrol.
level sensing to detect a short to ground and pulse voltage sensing to de

Page 11
Introduction
© JVA Technologies Pty. Ltd. www.jva-fence.com JVA ZLM4 Manual
vanced features of this device allow the performance to be tuned to the
when high voltage from an electric fence energiser wire is shorted to the
monitored low voltage loop or when two low voltage loops short to one

Introduction
Page 12 © JVA Technologies Pty. Ltd. www.jva-fence.com

Page 13
Introduction
© JVA Technologies Pty. Ltd. www.jva-fence.com JVA ZLM4 Manual

Features and Benets
Page 14 © JVA Technologies Pty. Ltd. www.jva-fence.com
3 FEATURES AND BENEFITS
Australian designed and
manufactured
Customise the low voltage
monitor to unique fence
status lights
Internal 7Ah 12V rechargeable
of a mains power failure
fence voltages
user interface for even
monitoring and
monitor.

Page 15
Features and Benets
© JVA Technologies Pty. Ltd. www.jva-fence.com JVA ZLM4 Manual
Local audible and visual
contacts or switched
voltage Output
Can be switched based on alarm
triggers or input states.
Enclosed fence terminals Tamper resistant and prevents
accidental contact with the low
voltage terminals

Features and Benets
Page 16 © JVA Technologies Pty. Ltd. www.jva-fence.com
3.1
•
•
•
•
•
•
•
•
•
•
• Runs from 16Vac or 12V DC external source
•
parts of IEC60335.2.76

Page 17
Constraints
© JVA Technologies Pty. Ltd. www.jva-fence.com JVA ZLM4 Manual
4 CONSTRAINTS
•
•
•
• The maximum series resistance of the fence wire loop which can be
•
JVA
•
• Perimeter Patrol version 5.2.2 or later is required to operate with a
ZLM4

Specications
Page 18 © JVA Technologies Pty. Ltd. www.jva-fence.com
5 SPECIFICATIONS
and outputs.
voltage
14.2Vdc
charging current
1200mA
Note 1
130mA at 12.5 Vdc
Maximum AC input voltage
19Vac
Note 2
5Vdc
Maximum power provided
Note 3
Maximum Energiser Joules
Note 4
18J
Maximum loop impedance 5000 Ohm
Maximum loop capacitance
to ground
Minimum loop resistance to
ground
1000 Ohm
NOTE 1

Page 19
Specications
© JVA Technologies Pty. Ltd. www.jva-fence.com JVA ZLM4 Manual
NOTE 2: The control inputs as supplied with 5V from a “weak pull up”
NOTE 3:
NOTE 4:
are shorted to the ZLM4 loop wires.

Equipment Requirements/Options
Page 20 © JVA Technologies Pty. Ltd. www.jva-fence.com
6 EQUIPMENT REQUIREMENTS/OPTIONS
6.1
•
•
6.2
•
•
• Windows PC
• Windows XP or later
•
adaptor or PAE212 TCP/IP adaptor
•
Notes:
1.
2.
Other manuals for ZLM4
2
Table of contents
Other JVA Monitor manuals