JVC KD-DV6206 User manual

DVD/CD RECEIVER KD-DV6206/KD-DV6205
For canceling the display demonstration, see page 11.
For installation and connections, refer to the separate manual.
INSTRUCTIONS
GET0383-004A
[A]
Cover_DV6206_004A_f.indd 2Cover_DV6206_004A_f.indd 2 3/7/06 10:51:10 AM3/7/06 10:51:10 AM

2
How to forcibly eject a disc
If a disc cannot be recognized by the unit or
cannot be ejected, ejects the disc as follows.
“PLEASE” and “EJECT” appear alternately
on the display.
• If this does not work, reset your unit.
• Be careful not to drop the disc when it
ejects.
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to
obtain the best possible performance from the unit.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave
all servicing to qualified service personnel.
3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.
Avoid direct exposure to beam.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
How to reset your unit
This will reset the microcomputer. Your
preset adjustments will also be erased.
EN02-07_DV6206_004A_f.indd 2EN02-07_DV6206_004A_f.indd 2 2/24/06 10:49:23 AM2/24/06 10:49:23 AM

3
WARNINGS:
• DO NOT install any unit in locations
where;
– it may obstruct the steering wheel and
gearshift lever operations, as this may
result in a traffic accident.
– it may obstruct the operation of safety
devices such as air bags, as this may
result in a fatal accident.
– it may obstruct visibility.
• DO NOT operate any unit while
manipulating the steering wheel, as this
may result in a traffic accident.
• The driver must not watch the monitor
while driving.
If the driver watches the monitor while
driving, it may lead to carelessness and
cause an accident.
• The driver must not put on the
headphones while driving. It is
dangerous to shut off the outside sounds
while driving.
• If you need to operate the unit while
driving, be sure to look ahead carefully
or you may be involved in a traffic
accident.
• If the parking brake is not engaged,
“DRIVER MUST NOT WATCH THE
MONITOR WHILE DRIVING.”
appears on the monitor, and no
playback picture will be shown.
– This warning appears only when the
parking brake wire is connected to the
parking brake system built in the car
(refer to the Installation/Connection
Manual).
This product incorporates copyright
protection technology that is protected
by U.S. patents and other intellectual
property rights. Use of this copyright
protection technology must be authorized
by Macrovision, and is intended for home
and other limited viewing uses only unless
otherwise authorized by Macrovision.
Reverse engineering or disassembly is
prohibited.
Caution on volume setting:
Discs produce very little noise compared
with other sources. Lower the volume
before playing a disc to avoid damaging
the speakers by the sudden increase of the
output level.
Temperature inside the car....
If you have parked the car for a long time in
hot or cold weather, wait until the temperature
in the car becomes normal before operating the
unit.
For safety....
•Do not raise the volume level too much, as
this will block outside sounds, making driving
dangerous.
•Stop the car before performing any
complicated operations.
EN02-07_DV6206_004A_f.indd 3EN02-07_DV6206_004A_f.indd 3 2/24/06 10:49:24 AM2/24/06 10:49:24 AM

4
How to read this manual
•Some related tips and notes are explained in
“More about this unit”(see pages 44 –47).
•Button operations are mainly explained with
the illustrations as follows:
Press briefly.
Press repeatedly.
Press either one.
Press and hold until
your desired response
begins.
Press and hold both
buttons at the same
time.
How to use the M MODE button
If you press M MODE, the unit goes into
functions mode, then the number buttons and
5/∞buttons work as different function buttons.
Ex.: When number button 2 works as
MO (monaural) button.
Time countdown indicator
To use these buttons for their original
functions again after pressing M MODE,
wait for 5 seconds without pressing any of these
buttons until the functions mode is cleared or
press M MODE again.
How to detach/attach the control panel
Detaching... Attaching...
EN02-07_DV6206_004A_f.indd 4EN02-07_DV6206_004A_f.indd 4 2/24/06 10:49:24 AM2/24/06 10:49:24 AM

5
Other disc operations ..................... 29
Basic operations..................................... 29
Changing the display information ......... 30
Selecting the playback modes................ 31
Dual Zone operations ..................... 32
Listening with headphones .................... 32
Sound adjustments......................... 33
Selecting preset sound modes ...... 33
Storing your own sound adjustments..... 33
Adjusting the sound ............................... 34
General settings — PSM................ 35
Basic procedure ..................................... 35
Title assignment............................. 37
CD changer operations.................... 38
Playing discs in the CD changer .... 38
Changing the display information ......... 40
Selecting the playback modes................ 41
External component operations ............ 42
Playing an external component.... 42
Maintenance .................................. 43
More about this unit....................... 44
Troubleshooting ............................. 48
Specifications................................. 51
Contents
How to reset your unit ........................... 2
How to forcibly eject a disc................... 2
How to read this manual........................ 4
How to use the M MODE button........... 4
How to detach/attach the control panel ... 4
Introduction —Playable discs............ 6
Control panel ................................. 7
Parts identification................................. 7
Remote controller —RM-RK230 ....... 8
Main elements and features ................... 8
Getting started .............................. 10
Basic operations............................. 10
Canceling the display demonstrations ... 11
Setting the clock .................................... 11
Radio operations............................ 12
Listening to the radio .................... 12
Storing stations in memory.................... 13
Listening to a preset station ................... 14
Disc operations .............................. 15
Playing a disc in the unit............... 15
Basic operations .................................... 17
DVD/VCD special functions ............ 19
Selecting subtitles .................................. 19
Selecting audio languages ..................... 19
Selecting multi-angle views................... 19
Disc menu operations ............................ 20
Zoom in.................................................. 20
On-Screen disc operations............... 21
Basic on-screen bar operations .............. 22
Basic control screen operations ............. 24
List screen operations ............................ 25
DVD setup menu ............................ 26
Basic setting procedure.......................... 26
EN02-07_DV6206_004A_f.indd 5EN02-07_DV6206_004A_f.indd 5 2/24/06 10:49:25 AM2/24/06 10:49:25 AM

6
Introduction — Playable discs
Discs you can play
You can play back the following discs (12 cm
and 8 cm) on this unit:
•DVD Video: Recorded in either PAL or
NTSC color system with Region Code “4”
(see the following).
–DVD-R*/-RW, +R/+RW recorded in the
DVD-Video format can also be played (see
page 44).
•Video CD (VCD)/audio CD
•MP3/WMA: Recorded either in CD-R/-RW,
DVD-R/-RW, +R/+RW, or DVD-ROM.
–CD-R/-RW: Compliant with ISO 9660
Level 1, ISO 9660 Level 2, Romeo, and
Joliet.
–DVD-R/-RW, +R/+RW, DVD-ROM:
Compliant with UDF-Bridge Format.
On some discs, the actual operations may be
different from what is explained in this manual.
• It is possible to play back finalized +R/+RW
(Video mode only) discs. However, the use
of +R double layer disc on this unit is not
recommended.
* DVD-R recorded in multi-border format is
also playable (except for dual layer discs).
Discs cannot be played back
DVD-Audio, DVD-ROM (data), DVD-RAM,
DVD-R/-RW, +R/+RW recorded in the
DVD-VR format, CD-ROM, CD-I (CD-I
Ready), Photo CD, etc.
•Playing back these discs will generate noise
and damage the speakers.
Caution for DualDisc playback
The Non-DVD side of a “DualDisc”does not
comply with the “Compact Disc Digital Audio”
standard. Therefore, the use of Non-DVD
side of a DualDisc on this product may not be
recommended.
Note on Region Code:
DVD players and DVD Video discs have
their own Region Code numbers. This unit
can only play back DVD discs whose Region
Code numbers include “4.”
Examples:
If you insert a DVD Video disc of an
incorrect Region Code
“REGION CODE ERROR!”appears on the
monitor.
EN02-07_DV6206_004A_f.indd 6EN02-07_DV6206_004A_f.indd 6 2/24/06 10:49:25 AM2/24/06 10:49:25 AM

7
Control panel
15(up) / ∞(down) buttons
• Function as Play / Stop buttons for DVD
and VCDs.
2E EQ (equalizer) button
3D DISP (display) button
4S SEL (select) button
5•Control dial
•(standby/on attenuator) button
6Display window
7Remote sensor
80(eject) button
94/¢buttons
p(control panel release) button
qSOURCE button
wBAND button
eNumber buttons
rMO (monaural) button
tSSM (Strong-station Sequential Memory)
button
yDUAL (dual zone) button
uRPT (repeat) button
iRND (random) button
oM MODE button
;
AUX (auxiliary) input jack
Display window
aDisc information indicators—
TAG (ID3 Tag), (folder), (track/file)
sMain display
dSource display / Volume level indicator
fEQ (equalizer) indicator
gSound mode indicators—ROCK,
CLASSIC, POPS, HIP HOP, JAZZ, USER
• also works as the time countdown
indicator and level meter during play
(see page 35).
hDisc type indicators—WMA, MP3
jTuner reception indicators—
ST (stereo), MO (monaural)
kPlayback source indicators—
CH: Lights up for the CD changer.
DISC: Lights up for the built-in DVD/CD
player.
lPlayback mode / item indicators—
RND (random), (disc), (folder),
RPT (repeat)
/LOUD (loudness) indicator
zTr (track) indicator
Parts identification
Display window
EN02-07_DV6206_004A_f.indd 7EN02-07_DV6206_004A_f.indd 7 3/7/06 10:52:14 AM3/7/06 10:52:14 AM

8
Remote controller — RM-RK230
Installing the lithium coin battery
(CR2025)
Before using the remote controller:
Aim the remote controller directly at the remote
sensor on the unit. Make sure there is no
obstacle in between.
• Do not expose the remote sensor to strong
light (direct sunlight or artificial lighting).
Warning:
• Do not install any battery other than
CR2025 or its equivalent; otherwise, it may
explode.
• Store the battery in a place where children
cannot reach to avoid risk of accident.
• To prevent the battery from over-heating,
cracking, or starting a fire:
– Do not recharge, short, disassemble,
heat the battery, or dispose of it in a fire.
– Do not leave the battery with other
metallic materials.
– Do not poke the battery with tweezers or
similar tools.
– Wrap the battery with tape and insulate
when throwing away or saving it.
Remote sensor
Main elements and features
IMPORTANT:
If Dual Zone is activated (see page 32),
the remote controller only functions for
operating the DVD/CD player.
MONITOR CONTROL
1Monitor control buttons
• Used for a JVC monitor—KV-MR9010
or KV-MH6510.
DVD/RECEIVER CONTROL
2(standby/on attenuator) button
•Turns the power on if pressed briefly or
attenuates the sound when the power is
on.
•Turns the power off if pressed and held.
3SOURCE button
•Selects the source.
EN08-15_DV6206_004A_f.indd 8EN08-15_DV6206_004A_f.indd 8 2/24/06 10:49:50 AM2/24/06 10:49:50 AM

9
4BAND button
• Selects the FM/AM bands.
5TOP M (menu) button*1
•Shows the DVD and VCD*2disc menu.
6DUAL button
•Activate and deactivate Dual Zone.
7VOL + / –buttons
•Adjusts the volume level.
•Also function as 2nd VOL +/–buttons
when pressed with SHIFT button.
8SETUP button*1
9SHIFT button
pBasic disc operation buttons*3
7(stop), 3(play), 8(pause)
•3(play) also function as ZOOM button
when pressed with SHIFT button.
qAdvanced disc operation/tuner operation
buttons*4
For advanced disc operations:
•/TITLE 5/ ∞—Select the titles (for
DVD) or folders (for MP3/WMA).
•4/ ¢(reverse skip/forward skip)
•1/ ¡(reverse search/forward
search)*4
For tuner operations:
•PRESET 5/ ∞—Changes the preset
stations.
•4/ ¢—Search for the stations.
wOSD button
•Shows the on-screen bar.
•Also function as the /TITLE button
when pressed with SHIFT button.
–You can directly select titles (for DVD)
or folders (for MP3/WMA) using the
number buttons (see page 18).
eMENU button*1
•Shows the DVD and VCD*2disc menu.
rMenu operation buttons*1
•Cursor (%, fi, @, #), and ENTER
–Makes selection/settings.
•DISC + / –
–Changes discs when the source is
“CD-CH.”
tRETURN button*1
ySpecial function buttons
•DVD: Selects audio language ( ),
subtitles ( ), angle ( ).
•VCD: Selects audio channel ( ).
*1These buttons function as the number
buttons when pressed with SHIFT button.
*2Only when PBC is not in use.
*3Not used for CD changer operations.
*4These buttons function as the +10/–10
and +100/–100 buttons when pressed with
SHIFT button.
How to select a number
To select a number from 0 –9:
To select a number greater than 9:
•+100/–100 buttons used only for searching
MP3/WMA tracks number greater than 99.
EN08-15_DV6206_004A_f.indd 9EN08-15_DV6206_004A_f.indd 9 3/7/06 10:13:07 AM3/7/06 10:13:07 AM

10
~Turn on the power.
Ÿ
Select “CD-CH” when using an Apple
iPod®or a JVC D. player (see page 36).
You cannot select some sources if they
are not ready or not connected.
!For FM/AM tuner
⁄Adjust the volume.
Volume level appears.
Volume level indicator
@Adjust the sound as you want.
(See pages 33 and 34.)
To drop the volume in a moment (ATT)
To restore the sound,
press it again.
To turn off the power
Getting started
Basic operations
EN08-15_DV6206_004A_f.indd 10EN08-15_DV6206_004A_f.indd 10 3/7/06 10:53:24 AM3/7/06 10:53:24 AM

11
Canceling the display
demonstrations
If no operations are done for about 20 seconds,
display demonstration starts.
[Initial: DEMO ON]—see page 35.
1
2
3
4Finish the procedure.
To activate the display demonstration
In step 3above...
Setting the clock
1
2Set the hour and minute.
1Select “CLOCK H” (hour), then
adjust the hour.
2Select “CLOCK M” (minute),
then adjust the minute.
3Finish the procedure.
To check the current clock time when the
power is turned off
EN08-15_DV6206_004A_f.indd 11EN08-15_DV6206_004A_f.indd 11 2/24/06 10:49:51 AM2/24/06 10:49:51 AM

12
To tune in to a station manually
In step !on the left column...
1
2Select a desired station frequency.
Radio operations
Listening to the radio
~
Ÿ
Selected band appears.
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
!Start searching for a station.
When a station is received, searching
stops.
To stop searching, press the same
button again.
EN08-15_DV6206_004A_f.indd 12EN08-15_DV6206_004A_f.indd 12 3/7/06 10:53:53 AM3/7/06 10:53:53 AM

13
When an FM stereo broadcast is hard to
receive
1
2
Lights up when monaural mode is activated.
Reception improves, but stereo effect will
be lost.
To restore the stereo effect, repeat the same
procedure. “MONO OFF”appears and the MO
indicator goes off.
Storing stations in memory
You can preset six stations for each band.
FM station automatic presetting—
SSM (Strong-station Sequential
Memory)
1
2Select the FM band (FM1 –FM3)
you want to store into.
3
4
“SSM”flashes, then disappears when
automatic presetting is over.
Local FM stations with the strongest signals are
searched and stored automatically in the FM
band.
Continued on the next page
EN08-15_DV6206_004A_f.indd 13EN08-15_DV6206_004A_f.indd 13 2/24/06 10:49:52 AM2/24/06 10:49:52 AM

14
Manual presetting
Ex.: Storing FM station of 92.5 MHz into preset
number 1 of the FM1 band.
1
2
3
4
Preset number flashes for a while.
To check the current clock time while
listening to an FM or AM station
* If no title is assigned to a station, “NO
NAME”appears. To assign a title to a
station, see page 37.
Listening to a preset station
1
2
3Select the preset station (1 –6) you
want.
or
When using the remote controller....
or
EN08-15_DV6206_004A_f.indd 14EN08-15_DV6206_004A_f.indd 14 2/24/06 10:49:53 AM2/24/06 10:49:53 AM

15
Before performing any operations, make
sure the following....
•To watch the playback pictures, select the an
appropriate video system (NTSC or PAL) to
match it to the connected monitor. (See page
36.)
•Turn on the monitor to watch the playback
picture. If you turn on the monitor, you can
also control the audio CD, CD Text, and
MP3/WMA playback by referring to the
monitor screen. (See pages 24 and 25.)
•For DVD playback, you can change the Setup
Menu setting to your preference. (See pages
26 –28.)
•The operations explained on pages 17 –28 are
using the remote controller.
•When you want to operate the DVD/CD
player using the buttons on the control panel,
see “Other disc operations”on pages 29 –31.
If “”appears on the monitor when
pressing a button, the unit cannot accept an
operation you have tried to do.
•In some cases, without showing “,”
operations will not be accepted.
The disc type is automatically detected, and
playback starts automatically (for DVD:
automatic start depends on its internal program).
If the current disc is an audio CD, CD Text,
MP3/WMA, or VCD without PBC, all tracks
will be played repeatedly until you change the
source or eject the disc.
•If a title list or disc menu appears while
playing a DVD or VCD with PBC, see “Disc
menu operations”on page 20.
The following marks are used to indicate
the playable discs....
DVD Video Video CD with PBC
only
Video CD with/without
PBC
Audio CD/
CD Text
MP3/WMA disc All discs listed here
Disc operations
Playing a disc in the unit
Continued on the next page
EN08-15_DV6206_004A_f.indd 15EN08-15_DV6206_004A_f.indd 15 2/24/06 10:49:53 AM2/24/06 10:49:53 AM

16
• When inserting a DVD disc:
• When inserting an MP3/WMA disc:
*1Either the MP3 or WMA indicator lights up
depending on the detected file.
*2Does not light up for DVD-R/-RW, +R/+RW.
•When inserting a VCD:
•When inserting a CD Text/audio CD:
To eject the disc
Total folder number
Total track number
Disc information appears
automatically (see page 30).
Current folder number
Current track
number
Total playing time
of the inserted disc
Total track number
of the inserted disc
CD Text: Disc title/performer =
Track title appears automatically
(see page 30).
Current track
number
Elapsed playing
time
Elapsed playing
time
Elapsed playing time
Total title number
Current chapter number
Total playing time
of the inserted disc
Total track number
of the inserted disc
Elapsed playing
time
Ex.: When an MP3 file is detected
EN16-27_DV6206_004A_f.indd 16EN16-27_DV6206_004A_f.indd 16 2/24/06 10:50:06 AM2/24/06 10:50:06 AM

17
Basic operations
Operations Display indication and/or next operation
To stop play temporarily “PAUSE”illuminates on the display.
A still picture appears.
AFrame by frame playback
BSlow motion playback
• No sound comes out during Slow Motion Playback.
• When playing a VCD, Reverse Slow Motion Playback is
prohibited.
To resume normal play:
To replay the previous
scenes—One Touch Replay
The playback position moves back about 10 seconds before
the current position.
•This function works only within the same title.
•For some DVDs, this function does not work.
To stop playback When you start playback again, playback
starts from where it has been stopped
(Resume play).
When you start playback again, playback starts from
the beginning of the last track.
* During play, on-screen guide icons appear on the monitor for a while (see page 47).
Continued on the next page
EN16-27_DV6206_004A_f.indd 17EN16-27_DV6206_004A_f.indd 17 2/24/06 10:50:08 AM2/24/06 10:50:08 AM

18
To locate a particular title/chapter/
track directly
•For DVD: During play or pause—select a
chapter.
During stop—select a title.
•For VCD: While PBC (see page 20) is not
in use.
•For MP3/WMA: Select a track within the
same folder.
Select the number corresponding to the item
you want (see page 9).
To locate a title/folder
To the next title/folder.
To the previous title/folder.
To locate a particular title/folder
Within 10 seconds,
press the number
buttons (see page 9).
To go to the next or previous
chapters/tracks
•For DVD: During play or pause
To the following
chapters/tracks.
To go back to the beginning of the current
chapter/track, then the previous chapters/tracks.
To fast-forward or reverse
the chapter/track
Fast-forwards.
Reverses.
* The search speed changes to x2 ]x10 for all
discs (DVD, VCD, CD), but the information
shown on the monitor is only for DVD/VCD.
To forward or reverse
search the chapter/track
The information shown is only for DVD/VCD:
•To resume normal speed
EN16-27_DV6206_004A_f.indd 18EN16-27_DV6206_004A_f.indd 18 2/24/06 10:50:08 AM2/24/06 10:50:08 AM

19
DVD/VCD special functions
Selecting subtitles
You can select the language of the subtitle
to be shown on the monitor.
•You can set the initial subtitle language
using the setup menu (see page 27).
Ex.: When the disc has 3 options
Selecting audio languages
For DVD:
You can select the language to listen to if
the disc has multiple audio languages.
Ex.: When the disc has 3 options
ENGLISH
1/3
ENGLISH
1/3
For VCD:
You can select the audio channel to
play. (This is convenient when playing a
Karaoke VCD.)
ST: To listen to normal stereo (left/right)
playback.
L: To listen to the L (left) audio channel.
R: To listen to the R (right) audio channel.
Selecting multi-angle views
You can view the same scene at different
angles if the disc has multi-angle views.
Ex.: When the disc has 3 multi-angle views
•For some DVDs and VCDs, changing the
subtitle language, audio language (or audio
channel) without using the disc menu is
prohibited.
ENGLISH
1/3
ENGLISH
1/3
1
1/3
2
1/3
3
1/3
ST
ST
1
1/3
1
1/3
EN16-27_DV6206_004A_f.indd 19EN16-27_DV6206_004A_f.indd 19 2/24/06 10:50:09 AM2/24/06 10:50:09 AM

20
Canceling the PBC playback
1
2Select a track to start normal playback using
the number buttons (see page 9).
To resume the PBC function
Zoom in
1
2Move the zoomed-in portion.
To cancel zoom, select “ZOOM OFF”in
step 1.
Disc menu operations
Menu-driven playback is possible while playing
back a DVD with menu-driven features or a
VCD with the PBC (PlayBack Control).
While playing a DVD
1
A title list or disc menu will appear on the
monitor.
2Select the item you want on the
menu.
Selected item starts playback.
•On some discs, you can also select items
using the corresponding number buttons.
While playing a VCD
•When a list of items is displayed on the
monitor.
•To select a number greater than 9, see “How
to select a number”on page 9.
To return to the previous menus
ZOOM 1 ZOOM 2 ZOOM 3 ZOOM 4
ZOOM 5ZOOM 6 ZOOM OFF
EN16-27_DV6206_004A_f.indd 20EN16-27_DV6206_004A_f.indd 20 2/24/06 10:50:10 AM2/24/06 10:50:10 AM