JVC KD-G825 User manual

ENGLISH
For canceling the display demonstration, see page 6.
For installation and connections, refer to the separate manual.
INSTRUCTIONS
GET0360-001A
[U/UH]
KD-G825
CD RECEIVER KD-G825
Cover_KD-G825[U_UH]f.indd 2Cover_KD-G825[U_UH]f.indd 2 12/23/05 11:15:43 AM12/23/05 11:15:43 AM

2
ENGLISH
How to forcibly eject a disc
“Please Eject” appears on the display.
• If this does not work, reset your unit.
• Be careful not to drop the disc when it ejects.
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your co plete understanding and to
obtain the best possible perfor ance fro the unit.
IMPORTANT FOR LASER PRODU TS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave
all servicing to qualified service personnel.
3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.
Avoid direct exposure to bea .
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
How to reset your unit
Your preset adjustments will also be erased.
How to use the MODE/SEL button
If you use MODE or SEL (select), the display
and so e controls (such as the nu ber buttons,
4/¢ buttons, 5/∞ buttons, and the
control dial) enter the corresponding control
ode.
Ex.: When you press nu ber button 1 after
pressing MODE, to operate the FM tuner.
Works as time countdown indicator.
To use these controls for original functions
again, wait for 15 seconds without pressing any
of these buttons until the control is cleared.
• Pressing MODE again also restores original
functions. However, pressing SEL akes the
unit enters a different ode.
aution:
If the te perature inside the car is below 0°C, the ove ent of ani ation and text scroll will be
halted on the display to prevent the display fro being blurred. appears on the display.
When the te perature increases, and the operating te perature is resu ed, these functions will
start working again.
EN02-05KD-G825[U_UH]f.indd 2EN02-05KD-G825[U_UH]f.indd 2 12/23/05 11:18:26 AM12/23/05 11:18:26 AM

ENGLISH
3
CONTENTS
ontrol panel ................................... 4
Remote controller — RM-RK50 .............. 5
Getting started ................................. 6
Basic operations ................................................... 6
Radio operations .............................. 7
Disc/USB memory operations ............. 9
Playing a disc in the unit ...................................... 9
Playing discs in the CD changer ............................ 9
Playing a USB memory ......................................... 1
Sound adjustments ........................... 14
General settings — PSM ................... 16
Title assignment ............................... 24
iPod®/D. player operations ................ 24
Other external component
operations .................................... 26
More about this unit ......................... 27
Maintenance .................................... 31
Troubleshooting ............................... 32
Specifications ................................... 35
For safety...
• Do not raise the volu e level too uch, as
this will block outside sounds, aking driving
dangerous.
• Stop the car before perfor ing any
co plicated operations.
Temperature inside the car...
If you have parked the car for a long ti e in hot
or cold weather, wait until the te perature in
the car beco es nor al before operating the
unit.
How to read this manual
• Button operations are ainly explained with
the illustrations in the table below.
• So e related tips and notes are explained in
“More about this unit” (see pages 27 – 31).
Press briefly.
Press repeatedly.
Press either
one.
Press and hold until your
desired response begins.
Press and hold both
buttons at the sa e ti e.
The following arks are used to indicate...
: Built-in CD player operations.
: External CD changer operations.
: External USB e ory operations.
Warning:
If you need to operate the unit while driving,
be sure to look ahead carefully or you ay be
involved in a traffic accident.
aution on volume setting:
Discs produce very little noise co pared
with other sources. Lower the volu e
before playing a disc to avoid da aging
the speakers by the sudden increase of the
output level.
EN02-05KD-G825[U_UH]f.indd 3EN02-05KD-G825[U_UH]f.indd 3 12/23/05 11:18:29 AM12/23/05 11:18:29 AM

4
ENGLISH
1 BAND button
2 • Control dial
• (standby/on attenuator) button
3 DISP (display) button
4 Re ote sensor
• DO NO expose the remote sensor to
strong light (direct sunlight or artificial
lighting).
5 Display window
6 5 (up) / ∞ (down) buttons
Parts identification
Control panel
7 EQ (equalizer) button
8 0 (eject) button
9 USB (Universal Serial Bus) input ter inal
p SRC (source) button
q (control panel release) button
w SEL (select) button
e MODE button
r Nu ber buttons
t 4/¢ buttons
How to detach/attach the control panel
Detaching... Attaching...
CAUTION:
The lever co es out if you pressed the 0 button while
the panel is detached. If this happens, push the lever back
into lock position before attaching the panel.
Lever
EN02-05KD-G825[U_UH]f.indd 4EN02-05KD-G825[U_UH]f.indd 4 12/23/05 11:18:30 AM12/23/05 11:18:30 AM

ENGLISH
5
Remote controller — RM-RK50
Installing the lithium coin battery
( R2025)
Aim the remote controller directly at the
remote sensor on the unit. Make sure there is
no obstacle in between.
aution:
Main elements and features
1 (standby/on/attenuator) button
• Turns the power on if pressed briefly or
attenuates the sound when the power is on.
• Turns the power off if pressed and held.
2 5 U (up) / D (down) ∞ buttons
• Changes the FM/AM bands with 5 U.
• Changes the preset stations with D ∞.
• Changes the folder of the MP3/WMA/
USB.
• While playing an MP3 disc on an
MP3-co patible CD changer:
– Changes the disc if pressed briefly.
– Changes the folder if pressed and held.
• While listening to an Apple iPod® or a
JVC D. player:
– Pauses/stops or resu es playback with
D ∞.
– Enters the ain enu with 5 U. (Now
5 U/D ∞/2 R/F 3 work as the enu
selecting buttons.)*
3 VOL – / VOL + buttons
• Adjusts the volu e level.
4 SOUND button
• Selects the sound ode (i-EQ: intelligent
equalizer).
* 5 U: Returns to the previous menu.
D ∞: Confirms the selection.
Warning:
• Do not install any battery other than
CR2025 or its equivalent; otherwise, it ay
explode.
• Store the battery in a place where children
cannot reach to avoid risk of accident.
• To prevent the battery fro over-heating,
cracking, or starting a fire:
– Do not recharge, short, disasse ble,
heat the battery, or dispose of it in a fire.
– Do not leave the battery with other
etallic aterials.
– Do not poke the battery with tweezers or
si ilar tools.
– Wrap the battery with tape and insulate
when throwing away or saving it.
Continued on next page...
EN02-05KD-G825[U_UH]f.indd 5EN02-05KD-G825[U_UH]f.indd 5 12/23/05 11:18:31 AM12/23/05 11:18:31 AM

6
ENGLISH
@ Adjust the sound as you want. (See
pages 14 – 16.)
To drop the volume in a moment (ATT)
To restore the sound, press it
again.
To turn off the power
Basic settings
• See also “General settings — PSM” on pages
16 – 18.
1
2-1 Canceling the display
demonstrations
Turn the control dial to set “ emo/Link”
to “Off.”
2-2 Setting the clock
1 Press number button 4 ( ).
“Clock Hr” (hour) appears. Then,
turn the control dial to adjust the
hour.
2 Press ¢ to select “Clock Min”
(minute). Then, turn the control
dial to adjust the minute.
3 Press ¢ to select “24H/12H.”
Then, turn the control dial to select
“12Hours” or “24Hours,” time
display mode.
3 xit from the setting.
5 SOURCE button
• Selects the source.
6 2 R (reverse) / F (forward) 3 buttons
• Searches for stations if pressed briefly.
• Fast-forwards or reverses the track if
pressed and held.
• Changes the tracks if pressed briefly.
• While listening to an iPod or a . player
(in menu selecting mode):
– Selects an item if pressed briefly. (Then,
press ∞ to confirm the selection.)
– Skips 10 items at a time if pressed and
held.
Getting started
Basic operations
~ Turn on the power.
Ÿ
* You cannot select these sources if they
are not ready or not connected.
! For FM/AM tuner
⁄ Adjust the volume.
EN06-13KD-G825[U_UH]f.indd 6EN06-13KD-G825[U_UH]f.indd 6 12/23/05 11:17:58 AM12/23/05 11:17:58 AM

7
ENGLISH
To check the current clock time when the
power is turned off
Changing the display pattern
Ex.: When tuner is selected as the source
Source operation display
“SMALL” (CD jac et image) graphic*1 is displayed.
“LARGE” (full display size) graphic*1 is displayed.
Audio level meter is displayed (see “LevelMeter” on page 17).
Goes bac to the initial display pattern.
*1 You can use your edited file for graphic screen
(see pages 19 – 22).
Depending on a downloaded file, it may take
a longer time to show it on the display.
*2 he information bar will disappear if no
operation is performed for five seconds.
Radio operations
~
Ÿ
! Start searching for a station.
When a station is received, searching
stops.
• When receiving an FM stereo broadcast
with sufficient signal strength,
lights up on the display.
To stop searching, press the same button
again.
To tune in to a station manually
In step ! above...
1
2 Select a desired station frequency.
When an FM stereo roadcast is hard to
receive
1
Continued on next page...
*2
EN06-13KD-G825[U_UH]f.indd 7EN06-13KD-G825[U_UH]f.indd 7 12/23/05 11:18:01 AM12/23/05 11:18:01 AM

8
ENGLISH
2
3 xit from the setting.
lights up on the display.
Reception improves, but stereo effect will
be lost.
To restore the stereo effect, select “Mono Off”
in step 2. goes off.
Storing stations in memory
You can preset six stations for each band.
FM station automatic presetting —
SSM (Strong-station Sequential
Memory)
1 Select the FM band (FM1 – FM3) you
want to store into.
2
3 Select “SSM.”
4
Local FM stations with the strongest signals are
searched and stored automatically in the FM
band.
Manual presetting
Ex.: Storing FM station of 92.5 MHz into preset
number 4 of the FM1 band.
Using the num er uttons
1
2
3
Using the Preset Station List
• When appears on the display, you can
move back to the previous display by pressing
number button 3.
1 Follow steps 1 and 2 above.
• By holding 5 / ∞, the Preset Station List
will appear (go to step 4 on page 9).
2
3 Display the Preset Station List.
EN06-13KD-G825[U_UH]f.indd 8EN06-13KD-G825[U_UH]f.indd 8 12/23/05 11:18:03 AM12/23/05 11:18:03 AM

9
ENGLISH
4 Select the preset number you want to
store into.
• You can move to the lists of the other FM
bands by pressing number button 5
() or 6 ( ) repeatedly.
5 Store the station.
Listening to a preset station
Using the num er uttons
1
2 Select the preset station (1 – 6) you
want to listen to.
or
Using the Preset Station List
1 Display the Preset Station List, then
select the preset station you want to
listen to.
2 Change to the selected station.
Disc/USB memory
operations
Playing a disc in the unit
All tracks will be played repeatedly until you
change the source or eject the disc.
To stop play ack and eject the disc
Playing discs in the CD changer
All discs in the magazine will be played
repeatedly until you change the source.
• Ejecting the magazine will also stop playback.
~
* If you have changed the external input
setting to “Ext In” (see page 18), you
cannot select the CD changer.
Ÿ Select a disc.
For disc number from 01 – 06:
For disc number from 07 – 12:
EN06-13KD-G825[U_UH]f.indd 9EN06-13KD-G825[U_UH]f.indd 9 12/23/05 11:18:05 AM12/23/05 11:18:05 AM

10
ENGLISH
Track and folder information (CD/CD Text/
MP3/WMA/USB)
Once you insert a disc or attach a USB
memory, the total track number/total
playing time (for C /C Text) and total
folder number/total track number (for MP3/
WMA/USB) appears, then the following
information appears...
Ex.: When “CD-CH” is selected as the source
• For the audio C or C Text:
Disc name*4 and Trac name*5
• For the MP3/WMA/USB:
Folder name and File name, or
Album/performer*6 and Trac name*6
• When playing C changer, the total
numbers will not appear.
*1 isplayed only when an MP3/WMA
track is played back.
*2 isplayed only when “C -CH” is selected
as the source.
*3 Either MP3 or WMA indicator lights up
depending on the detected file.
*4 Appears only for C Texts and C s if
it has been recorded or assigned. (“No
Name” appears if no name is recorded or
assigned.)
*5 Appears only for C Texts. (“No Name”
appears if no name is recorded.)
*6 Appears only when “Tag” is set to “On”
(see page 18).
Playing a USB memory
This unit can play MP3/WMA tracks stored in a
USB memory.
All tracks in the USB memory will be played
repeatedly until you change the source.
• Removing the USB memory will also stop
playback.
~
Ÿ
If a USB memory has been attached...
Playback starts from where it has been stopped
previously.
• If a different USB memory is currently
attached, playback starts from the beginning.
To detach the USB memory, straightly pull it
out from the unit.
Cautions:
• Avoid using the USB memory if it might
hinder your safety driving.
• Make sure all the important data has been
backed up to avoid losing the data.
USB input terminal
USB memory
File type*1*3
Current disc number*2
Current folder number*1
Current trac number
Elapsed playing time
EN06-13KD-G825[U_UH]f.indd 10EN06-13KD-G825[U_UH]f.indd 10 12/23/05 11:18:06 AM12/23/05 11:18:06 AM

11
ENGLISH
A out MP3 and WMA tracks
MP3 and WMA “tracks” (words “file” and
“track” are used interchangeably) are recorded
in “folders.”
When an MP3/WMA folder in an MP3/
WMA disc includes an image <jtw> file
edited by Image Converter (Ver 3.0)—
supplied in the C -ROM, you can show the
image on the display while the tracks in the
folder are played back—Image Link. (See
pages 17 and 29 for details.)
A out the CD changer
It is recommended to use a JVC MP3-
compatible C changer with your unit.
• You can also connect MP3-incompatible
C changers. These units, however, are not
compatible with MP3 discs.
• You cannot use the CH-X99, CH-X100, and
K -MK series C changers with this unit.
• You cannot play any WMA disc in the C
changer.
• isc text information recorded in the C
Text can be displayed when a JVC C Text
compatible C changer is connected.
• For connection, see Installation/Connection
Manual (separate volume).
To fast-forward or reverse the track
To go to the next or previous tracks
To go to the next or previous folders (only for
MP3/WMA/USB)
For MP3 tracks:
For WMA tracks:
For the main unit:
• Holding either of the buttons can display the
Folder List (see page 12).
For C changer:
• Holding either of the buttons can display the
isc List (see page 12).
To locate a particular track (for CD) or folder
(for MP3/WMA/USB) directly
To select a number from 01 – 06:
To select a number from 07 – 12:
• To use direct folder access on MP3/WMA/
USB, it is required that folders are assigned
with 2-digit numbers at the beginning of their
folder names—01, 02, 03, and so on.
To select a particular track in a folder (for
MP3/WMA/USB):
EN06-13KD-G825[U_UH]f.indd 11EN06-13KD-G825[U_UH]f.indd 11 12/23/05 11:18:07 AM12/23/05 11:18:07 AM

12
ENGLISH
5 Change to the selected item.
• The list disappears and playback starts.
Skipping tracks quickly during play
Only possible on JVC
MP3-compatible CD changer
• For MP3/WMA/USB, yo can skip tracks
within the same folder.
Ex.: To select track 32 while playing a track
whose n mber is a single digit (1 to 9).
1
2
Each time yo press the b tton, yo can
skip 10 tracks.
• After the last track, the first track will be
selected and vice versa.
3
Other main unctions
Selecting a disc/ older/track on the list
• When appears on the display, yo can
move back to the previo s display by pressing
n mber b tton 3.
1
2 Select “LIST.”
3 Select the list type.
*1 Selectable only when the
source is “CD-CH.”
*2 Selectable only when the
media is MP3, WM , or
USB.
• CD-CH (only for MP3): If yo select the
c rrent disc (highlighted on the display),
its Folder List appears.
• If yo select the c rrent folder
(highlighted on the display), its File List
appears.
4 Select an item.
EX.: When “File” is selected in step 3
• Yo can move to the other lists by
pressing n mber b tton 5 ( ) or
6 ( ) repeatedly.
EN06-13KD-G825[U_UH]f.indd 12EN06-13KD-G825[U_UH]f.indd 12 12/28/05 7:10:14 PM12/28/05 7:10:14 PM

13
ENGLISH
Prohi iting disc ejection
You can lock a disc in the loading slot.
• “No Eject” appears on the display.
To cancel the prohibition, repeat the same
procedure.
• “Eject OK” appears on the display.
Selecting the play ack modes
You can use only one of the following playback
modes at a time.
1
2 Select your desired playback mode.
7 Intro play
Mode Plays eginning 15 seconds of...
Track: All tracks of the current disc or
USB memory [ ].
Folder*1: First tracks of all folders
[].
Disc*2: First tracks of all the inserted
discs [ ].
Off: Cancels.
7 Repeat play
Mode Plays repeatedly
Track: The current track [ ].
Folder*1: All tracks of the current folder
[].
Disc*2: All tracks of the current disc
[].
Off: Cancels.
7 Random play
Mode Plays at random
Folder*1: All tracks of the current folder,
then tracks of the next folder
and so on [ ].
Disc *3 : All tracks of the current disc
[].
All*4: All tracks of the inserted discs
or USB memory [ ].
Off: Cancels.
*1 Only while playing a media (MP3/WMA/
USB).
*2 Only while playing discs in the CD
changer.
*3 Only while playing a disc.
*4 Only while playing discs in the CD
changer or playing a USB memory.
• You can also cancel the playback mode by
pressing number button 4 ( ) in step 2.
EN06-13KD-G825[U_UH]f.indd 13EN06-13KD-G825[U_UH]f.indd 13 12/23/05 11:18:10 AM12/23/05 11:18:10 AM

14
ENGLISH
Sound adjustments
Adjusting the sound
You can adjust the sound characteristics to your
preference.
• When appears on the display, you can
move back to the previous display by pressing
number button 3.
1
2
• For “EQ” setting, see the following.
3 Adjust the selected setting item.
A Fad/Bal (Fader/Balance)
1 Press number button 1 ) to
move to the “Fad/Bal” adjustment
display.
2 Adjust the speaker output balance
by pressing:
5 / ∞: between the front and rear
speakers. [F06 to R06]
4/¢ :
between the left and right
speakers. [L06 to R06]
B Subwoofer
1 Press number button 1 ) to
move to the “Subwoofer” adjustment
display.
2 Use 4/¢ to select a
cutoff frequency to the subwoofer.
• 80Hz: Frequencies higher than
80 Hz are cut off.
• 120Hz: Frequencies higher than
120 Hz are cut off.
• 160Hz: Frequencies higher than
160 Hz are cut off.
3 Turn the control dial to adjust the
subwoofer output level. [0 to 8]
C VolAdjust
Turn the control dial to adjust the input
level of each source except FM).
[–5 to +5]
Adjust to match the input level of the
FM sound level.
• Before making an adjustment, select a
source you want to adjust.
D Loudness
Turn the control dial to activate or
deactivate the loudness to produce a
well-balanced sound at low volume
levels. [Off or On]
4 Exit from the setting.
Selecting preset sound modes
(i-EQ: intelligent equalizer)
You can select a preset sound mode suitable to
the music genre.
Available sound modes
FLAT No sound mode is applied), H.RO K
Hard rock), R & B Rhythm & blues),
POP, JAZZ, DAN E, OUNTRY, REGGAE,
LASSI , USER 1, USER 2, USER 3
EN14-23KD-G825[U_UH]f.indd 14EN14-23KD-G825[U_UH]f.indd 14 12/23/05 11:16:49 AM12/23/05 11:16:49 AM

ENGLISH
15
Storing your o n sound modes
You can adjust the sound modes and store your
own adjustments in memory.
• When appears on the display, you can
move back to the previous display by pressing
number button 3.
1
or
Follow steps 1 and 2 on page 14.
• In step 2, select “EQ.”
2 Select a sound mode.
To display the rest
3 Select a frequency range.
4 Adjust the sound elements of the
selected frequency range.
1 Use 5 / ∞ to adjust the level.
2 Press number button 2 ),
then turn the control dial to select the
frequency.
3 Press number button 2 ), then
turn the control dial to select the band
width.
Sound
elements
Range/selectable items
Lo Mid High
Level –06 to
+06
–06 to
+06
–06 to
+06
FREQ
Frequency)
60 Hz
80 Hz
100 Hz
200 Hz
500 Hz
1 kHz
1.5kHz
2.5kHz
10 kHz
12.5kHz
15 kHz
17.5kHz
Q Band
width)
Q1.0
Q1.25
Q1.5
Q2.0
Q0.5
Q0.75
Q1.0
Q1.25
Fix
5 Repeat steps 3 and 4 to adjust other
frequency ranges.
6 Store the adjustments.
EN14-23KD-G825[U_UH]f.indd 15EN14-23KD-G825[U_UH]f.indd 15 12/23/05 11:16:53 AM12/23/05 11:16:53 AM

16
ENGLISH
The list below shows the preset value setting for each sound mode:
Sound
modes
Preset values
Lo Mid High
Level FREQ
(Frequency)
Q (Band
idth)
Level FREQ
(Frequency)
Q (Band
idth)
Level FREQ
(Frequency)
Q (Band
idth)
FLAT 00 60 Hz Q1.25 00 1 kHz Q1.25 00 10 kHz
Fix
H.ROCK +03 100 Hz Q1.0 00 1 kHz Q1.25 +02 10 kHz
R & B +03 80 Hz Q1.25 +01 1 kHz Q1.25 +03 15 kHz
POP +02 100 Hz Q1.25 +01 1 kHz Q1.25 +02 10 kHz
JAZZ +03 80 Hz Q1.25 00 1 kHz Q1.25 +03 10 kHz
DANCE +04 60 Hz Q1.0 -02 1 kHz Q1.0 +01 10 kHz
COUNTRY +02 60 Hz Q1.0 00 1 kHz Q1.0 +02 12.5kHz
REGGAE +03 60 Hz Q1.25 +02 1 kHz Q1.25 +02 12.5kHz
CLASSIC +01 80 Hz Q1.25 00 1 kHz Q1.25 +03 10 kHz
General settings — PSM
Basic procedure
You can change PSM Preferred Setting Mode)
items listed in the table that follows.
1
An item previously selected appears on the
display.
2 Select a SM category.
To display the rest
3 Select a SM item.
• By pressing either of the buttons
repeatedly, you can also move to the item
of the other categories.
4 Adjust the selected SM item.
5 Repeat steps 2 to 4 to adjust other
SM items if necessary.
6 Exit from the setting.
EN14-23KD-G825[U_UH]f.indd 16EN14-23KD-G825[U_UH]f.indd 16 12/23/05 11:16:54 AM12/23/05 11:16:54 AM

ENGLISH
17
Category Indications Selectable settings, [reference page]
MOVIE
Demo/Link
Display
demonstration
Demo: [Initial]; Display demonstration will be
activated automatically, [6].
Image Link: To show a still image while playing MP3/
WMA tracks, [11, 29].
Off: Cancels.
• Still image appears if no operation is done for about
20 seconds.
LevelMeter
Audio level meter
You can select the different level meter patterns.
Meter 1 [Initial] O Meter 2
• Press DISP repeatedly to show the selected level meter.
Pict
Pictures
Download: [Initial]; Download files, [19].
Set: Activate the stored files, [22]
Delete: Delete the stored files, [21].
CLOCK
lock Hr
Hour adjustment
1 – 12AM/1 – 12PM 0 – 23), [6]
[Initial: 1 (1:00AM ]
lock Min
Minute adjustment
00 – 59, [6]
[Initial: 00 (1:00AM ]
24H/12H
Time display mode
12Hours – 24Hours, [6]
[Initial: 12Hours]
DISPLAY
Scroll
Scroll
Once: [Initial]; Scrolls the track information once.
Auto: Repeats scrolling 5-second intervals).
Off: Cancels.
• Pressing DISP for more than one second can scroll the
display regardless of the setting.
Dimmer
Dimmer
From – To*1:
Auto: [Initial]; Dims the display when you turn on
the headlights.
Off: Cancels.
On: Activates dimmer.
Time Set: Set the timer for dimmer, [22].
Any hour – Any hour
[Initial: 6PM – 7AM]
ontrast
Contrast
1 – 10: [Initial: 5]; Adjust the display contrast to
make the display indications clear and
legible.
L D Type
Display type
Negative: [Initial]; Negative pattern of the display
except still images and animation).
Auto: Positive pattern will be selected during the
day time*2; while negative pattern will be
used during the night time*2.
Positive: Positive pattern of the display.
*1 Adjustable only when “Dimmer” is set to “Time Set.”
*2 Depends on the “Dimmer” setting.
Continued on next page...
EN14-23KD-G825[U_UH]f.indd 17EN14-23KD-G825[U_UH]f.indd 17 12/23/05 11:16:56 AM12/23/05 11:16:56 AM

18
ENGLISH
Category Indications Selectable settings, [reference page]
DISPLAY
Font Type
Font type
You can select the font type used on the display.
1 [Initial] O 2
Tag
Tag display
On: [Initial]; Shows the Tag information display
while playing MP3/WMA tracks, [10].
Off: Cancels.
TUNER
IF Band
Intermediate
frequency filter
Auto: [Initial]; Increases the tuner selectivity to
reduce interference noises between close
stations. Stereo effect may be lost.)
Wide: Subject to the interference noises from
adjacent stations, but sound quality will
not be degraded and the stereo effect will
remain.
AUDIO
Ext Input*3
External input
hanger: [Initial]; To use a JVC CD changer, [9], an
Apple iPod or a JVC D. player, [24].
Ext In: To use any other external component than
the above, [26].
Beep
Key-touch tone
On: [Initial]; Activates the key-touch tone.
Off: Deactivates the key-touch tone.
Telephone
Telephone muting
Muting1/Muting2: Select either one which mutes the
sounds while using a cellular phone.
Off: [Initial]; Cancels.
• If CD, CD changer, or USB has been selected as the source,
playback pauses during telephone muting.
Amp Gain
Amplifier gain
control
You can change the maximum volume level of this unit.
High PWR: [Initial]; Volume 00 – Volume 50
Low PWR: Volume 00 – Volume 30 Select this if the
maximum power of the speaker is less than
50 W to prevent them from being damaged.)
COLOR
olor Sel
Color selection
[Initial: All Source]; You can select your favorite display color
for each source or for all sources), [22].
olor Set
Red
Green
Blue
You can create your own colors, and select them for the
display color, [23].
Day olor: User color during the day time*4.
Night olor: User color during the night time*4.
+00 – +11 [Initial: Day Color: +07, NightColor: +05]
+00 – +11 [Initial: Day Color: +07, NightColor: +05]
+00 – +11 [Initial: Day Color: +07, NightColor: +05]
*3 Displayed only when one of the following sources is selected—TUNER, CD, or USB.
*4 Depends on the “Dimmer” setting.
EN14-23KD-G825[U_UH]f.indd 18EN14-23KD-G825[U_UH]f.indd 18 12/23/05 11:16:57 AM12/23/05 11:16:57 AM

ENGLISH
19
• To download the file s), see the following.
• To delete the file s), see pages 20 and 21.
• To activate the file s), see page 22.
IMPORTANT:
• Refer also to Image Converter PDF files
included in the “Manual” folder on the
supplied CD-ROM.
• Still images pictures) and animations
movie) should have the following
extension code in their file names:
– jtl: for large size still images
– jtm: for small size still images
– jta: for large size animations
– jtb: for small size animations
– jtw: for Image Link see pages 11 and 17)
• Before you download or delete the files,
observe the following:
– Do not download a file while driving.
–
Do not turn off the ignition key of the car
while downloading or deleting a file.*
– Do not detach the control panel while
downloading or deleting a file.*
– Do not attach or detach a USB memory
while downloading a file.*
* If you do so, the file download or deletion
will not be done correctly.
Do nloading pictures or an animation
• It takes a long time to download an
animation. For details, see page 30.
• To activate the downloaded files, see page 22.
1 Follow steps 2 to 4 on left column.
• In step 3, select “Download.”
Graphic displays
Before starting the following procedure,
prepare a CD-R including still images pictures)
and animations movies).
• With Image Converter Ver 3.0) included in
the supplied CD-ROM, you can create and
download your own images and animations.
Samples are included in the CD-ROM.)
These images/animation will be shown during
playing a source.
• You can store “LARGE” or “SMALL” pictures
and movies.
Picture: 30 still images each
Movie: 60 frames each
Basic procedure
• When appears on the display, you can
move back to the previous display by pressing
number button 3.
• When / appears on the display,
you can move to the other lists by pressing
number button 5 or 6 repeatedly.
1 Insert a CD-R or the supplied
CD-ROM.
2 Follow steps 1 to 3 on page 16.
• In step 2, select “MOVIE.”
• In step 3, select “Pict.”
3 Select an item.
4 Select a picture size.
or
The display goes to the PICT menu.
Continued on next page...
EN14-23KD-G825[U_UH]f.indd 19EN14-23KD-G825[U_UH]f.indd 19 12/23/05 11:16:58 AM12/23/05 11:16:58 AM

20
ENGLISH
2
“File Check” flashes and then the Folder List
appears on the display.
3 Select a folder.
4 Display the File List.
5 Select a file.
6 Confirm the selection.
EX.: When “File1 Na” is selected
7 Download the file.
8 • To download more pictures from
the same folder, repeat steps 5 to 7.
• To download more pictures from
another folder, press number button
3 ( ). Then, repeat steps 3 to 7.
9 Exit from the setting.
Deleting the files
Deleting the stored animation
1 Follow steps 2 to 4 on page 19.
• In step 3, select “Delete.”
2
EX.: When “LARGE” is selected in
step 4 on page 1
3 Delete the animation.
4 Exit from the setting.
EN14-23KD-G825[U_UH]f.indd 20EN14-23KD-G825[U_UH]f.indd 20 12/23/05 11:17:00 AM12/23/05 11:17:00 AM