JVC KV-DV7 User manual

KV-DV7
DVD/CD PLAYER
DVD-/CD-SPIELER
LECTEUR DVD/CD
DVD/CD SPELER
ENGLISH
DEUTSCH
FRANÇAIS
INSTRUCTIONS
BEDIENUNGSANLEITUNG
MANUEL D’INSTRUCTIONS
GEBRUIKSAANWIJZING
DVD / VIDEO CD / CD
KV-DV7 DVD / CD PLAYER
OPEN
PHONES
DVD VCD/CD
123
D
MENU
TIME
DISPLAY
TITLE
SEARCH MODE
ENTER
SHIFT CLEAR
REPEAT
RETURN
ZOOM
SLOW
A-B RPT
456
789
S0C
M
POWER
STEP
SUBTITLE AUDIO ANGLE
H/P VOL
H/P VOL SETUP
NEDERLANDS
For installation and connections, refer to the separate manual.
Angaben zu Einbau und Verkabelung entnehmen Sie bitte der gesondertenAnleitung.
Pour l’installation et les raccordements, se référer au manuel séparé.
Zie de afzonderlijke handleiding voor details aangaande het installeren en verbinden van het
toestel.
LVT0631-001B
[E]
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the cabinet.
Retainthis informationforfuture
reference.
Model No.
Serial No.
COVER.KV-DV7[E].001-f 01.2.5, 10:41 AM3

2
ENGLISH
Position And Reproduction Of Labels
Name/Rating plate
Bottom panel of the main unit
Caution:
This product contains a laser component
of higher laser class than Class 1.
CLASS
LASER 1
PRODUCT
CAUTION: Invisible laser
radiation when open and
interlock failedor defeated.
AVOID DIRECT EXPOSURE
TO BEAM. (e)
ADVARSEL: Usynlig laser-
stråling ved åbning, når
sikkerhedsafbrydere er ude
af funktion. Undgåudsæt-
telse for stråling. (d)
VARNING: Osynlig laser-
strålning när denna del är
öppnad och spärren är
urkopplad. Betrakta ej
strålen. (s)
VARO: Avattaessa ja
suojalukitus ohitettaessa
olet alttiina näkymättö-
mälle lasersäteilylle.
Älä katso säteeseen. (f)
Warning label, placed inside the unit
WARNINGS
• DO NOT install any unit in locations where;
– it may obstruct the steering wheel and
gearshift leveroperations,asthismayresult
in a traffic accident.
– it may obstruct the operation of safety
devices such as air bags, as this may result
in a fatal accident.
– it may obstruct visibility.
• DO NOT operate any unit while manipulating
the steering wheel, as this may result in a
traffic accident.
• The driver must not watch the monitor while
driving.
Ifthe driver watchesthemonitorwhile driving,
it may lead to carelessness and cause an
accident.
• DO NOT use the headphones while driving. It
is dangerous to shut off the outside sounds
while driving.
• If you need to operate the unit while driving,
be sure to look ahead carefully or you may be
involved in a traffic accident.
-
DV7 DVD / CD PLAYER
OPEN
IMPORTANT FOR LASER PRODUCTS
Precautions:
1.CLASS 1 LASER PRODUCT
2.CAUTION: Invisible laser radiation when open
and interlock failed or defeated.Avoid direct
exposure to beam.
3.CAUTION: Do not open the top cover.There
are no user-serviceable parts inside. Leave all
servicing to qualified service personnel.
4.CAUTION: This DVD/CD player uses invisible
laser radiation, however, is equipped with safety
switches to prevent radiation emission when
unloading discs. It is dangerous to defeat the
safety switches.
5.CAUTION: Use of controls, adjustments or
performance of procedures other than those
specified herein may result in hazardous
radiation exposure.
CAUTION: DO NOT insert a disc while the
disc loading lamp is flashing or is not lit.
(See page 6.)
Note:
For security reasons, a numbered ID card is
provided with this unit, and the same ID number is
imprinted on the unit’s chassis. Keep the card in a
safe place, as it will help the authorities to identify
your unit if stolen.
How to reset your unit
Press the reset button on the front panel using a ball-point pen or a
similar tool.This will reset the built-in microcomputer.
NOTE:
If you reset the unit during play, the playback mode selections (e.g. repeat play mode
setting), you have selected for the current disc will be reset to the initial settings.
• During DVD playback, the disc menu selection will be also reset to the initial disc settings.
EN02-03.KV-DV7[E]_f 01.2.21, 8:39 PM2

3
ENGLISH
Thank you for purchasing a JVC product.Please read all instructions carefully before operation,
to ensure your complete understanding and to obtain the best possible performance from the unit.
CONTENTS
How to reset your unit............................... 2
INTRODUCTION ........................... 4
PREPARATION ............................. 5
Installing the battery ................................. 5
BASIC PLAYBACK ......................... 6
Starting playback ..................................... 6
• Listening with headphones .................. 7
Showing the on-screen bar....................... 8
• Checking the playing time.................... 9
DVD PLAYBACK ........................... 10
Selecting subtitles.................................... 10
Selecting audio languages ....................... 11
Selecting multi-angle views ...................... 11
MENU-DRIVEN PLAYBACK ............... 12
Menu operations ...................................... 12
• While playing a DVD ............................ 12
• While playing aVCD ............................ 13
SEARCH FUNCTIONS ..................... 14
Searching for a particular point ................ 14
• Forward Search .................................. 14
• Reverse Search .................................. 14
Locating a particular point directly............ 15
REPEAT PLAYBACK ....................... 16
Playing repeatedly ................................... 16
• Repeat Play ........................................ 16
• A-B Repeat ......................................... 17
SPECIAL EFFECTS PLAYBACK........... 18
• Slow-Motion Playback.......................... 18
• Frame-by-frame Playback.................... 18
• Zoom................................................... 19
DVD SETUP MENU ........................ 20
Setting initial audio language ................... 20
Setting initial subtitle language................. 21
Setting initial disc menu language............ 22
Setting digital audio output ....................... 22
Setting compression ................................. 23
Setting audio output during
Low Speed Search................................. 24
Setting monitor type................................. 25
Setting closed caption .............................. 26
Changing the color of the on-screen bar .. 26
Setting zoom preference .......................... 27
MAINTENANCE ............................ 29
Handling discs ......................................... 29
LANGUAGE CODES ....................... 30
GLOSSARY ................................. 31
LOCATION OF THE BUTTONS ............ 32
• Remote controller ................................ 32
• Control panel ...................................... 33
TROUBLESHOOTING...................... 34
SPECIFICATIONS .......................... 35
BEFORE USE
* For safety....
• Do not raise the volume level too much, as this
will block outside sounds, making driving
dangerous.
• Stop the car before performing any complicated
operations.
* Temperature inside the car....
If you have parked the car for a long time in hot
or cold weather, wait until the temperature in the
car becomes normal before operating the unit.
CAUTION on Volume Setting
Discs produce very little noise compared with other sources. If the volume level is adjusted for the tuner, for
example, the speakers may be damaged by the sudden increase in the output level. Therefore, lower the volume
before playing a disc and adjust it as required during playback.
EN02-03.KV-DV7[E]_f 01.2.21, 8:39 PM3

ENGLISH
4
INTRODUCTION
About this manual
This manual mainly explains operations using the buttons on the remote control.You can also use the
buttons on the control panel for the same operations if they have the similar or same marks.
• On some discs, their actual operations may be different from what is explained in this manual.
• The following discs cannot be played back;
– DVD-Audio, DVD-ROM, DVD-RAM, DVD-R, DVD-RW, CD-ROM, CD-R, CD-RW, CD-I
(CD-I Ready), Photo CD, etc.
Playing back these discs will generate noise and damage the speakers.
* Note on Region Code
DVD players and DVD Video discs have their own Region
Code numbers. This unit only can play back DVD discs
whose Region Code numbers include “2.”
Disc Mark Video Region Code
Type (Logo) Format Number*
COMPACT
DIGITAL AUDIO
DVD Video
PAL
2
ALL
Video CD
Audio CD
Discs you can play:
Disc structure – DVD, Video CD (VCD) and Audio CD (CD)
A DVD disc consists of Titles, and each title may be divided into some Chapters.(See Example 1.)
For example, if a DVD disc contains some movies, each movie may have its own title number, and it
may be further divided into some chapters.
On the other hand, a VCD or CD consists of Tracks.(See Example 2.)
In general, each song has its own track number. (On some discs, each track may also be divided by
Indexes.)
When playing back a VCD with Playback Control (PBC) function, you can select what to view using the
menu shown on the monitor. (While operating aVideo CD using the menu, some of the functions such
as Repeat and Track Search may not work.)
Example 1: DVD disc Example 2 :Video CD/Audio CD
Examples:
EN04-05.KV-DV7[E]_f 01.2.21, 8:40 PM4

ENGLISH
5
Installing the battery
Whenthe controllablerangeor effectivenessof the
remote controller decreases, replace the battery.
1. Remove the battery holder.
1) Push out the battery holder in the direction
indicated by the arrow using a ball-point pen
or a similar tool.
2) Remove the battery holder.
2. Place the battery.
Slide the battery into the holder with the + side
facing upwards so that the battery is fixed in the
holder.
3. Return the battery holder.
Insert again the battery holder pushing it until
you hear a clicking sound.
Before using the remote controller:
• Aim the remote controller directly at the remote
sensor on the main unit. Make sure there is no
obstacle in between.
• The remote signal reception lamp flashes when
the unit receives a remote control signal from the
remote controller.
• Do not expose the remote sensor to strong light
(direct sunlight or artificial lighting).
WARNING:
• Store the batteries in a place which children
cannot reach.
If a child accidentally swallows the batteries,
immediately consult a doctor.
• Do not recharge, short, disassemble or heat the
batteries or dispose of in a fire.
Doing any of these things may cause the
batteries to give off heat, crack or start a fire.
• Do not leave the batteries with other metallic
materials.
Doing this may cause the batteries to give off
heat, crack or start a fire.
• When throwing away or saving batteries, wrap in
tape and insulate; otherwise, it may cause the
batteries to give off heat, crack or start a fire.
• Do not poke the batteries with tweezers or
similar tools.
Doing this may cause the batteries to give off
heat, crack or start a fire.
1) 2)
Lithium coin battery
(product number:
CR2025)
(back side)
PREPARATION
Remote sensor
DVD / VIDEO CD / CD
KV-DV7 DVD / CD PLAYER
OPEN
PHONES
DVD VCD/CD
Remote signal
reception lamp
(back side)
EN04-05.KV-DV7[E]_f 01.2.21, 8:40 PM5

ENGLISH
6
Starting playback
1 Press POWER to turn on the
power. The lamps on the buttons on
the unit light up.
2 Press OPEN on the unit.
The loading slot cover opens.
DO NOT force the cover open by hand.
3 Insert a disc into the loading slot.
The unit draws in the disc
automatically.
• When the power is off, you
cannot insert a disc.
DO NOT insert a disc while the disc loading
lamp is flashing* or is not lit**.
* Flashing: while loading or ejecting a disc
**Not lit: when a disc has been loaded.
4 Close the slot cover by hand.
The disc type is automatically detected and
the detected disc lamp (DVD, VCD/CD)
lights up, and playback starts automatically.
• It takes a while to detect the disc type.
If a menu appears while playing a DVD or VCD
with PBC function, see “MENU-DRIVEN
PLAYBACK” on page 12.
The following marks used in this manual indicate
the discs to be used.
BASIC PLAYBACK
Video CD Audio CDDVD Video
123
D
MENU
TIME
DISPLAY
TITLE
SEARCH MODE
ENTER
SHIFT CLEAR
REPEAT
RETURN
ZOOM
SLOW
A-B RPT
456
789
S0C
M
POWER
STEP
SUBTITLE AUDIO ANGLE
H/P VOL
H/P VOL SETUP
H/P VOL 5 
H/P VOL ∞
7
SHIFT (S)
3
8 STEP
POWER
Before performing any operations, make sure
the following....
• Check the connection with the TV and with the
car receiver.
• Turn on the TV and the receiver.
• Select this unit (auxiliary or external input) as
the playback source on the receiver.
• Select the correct input where this unit is
connected.
• For DVD playback, you can change the
Setup Menu setting to your preference. (See
pages 20 – 28.)
If “ ”appears on the screen when
pressing a button, the disc cannot accept an
operation you have tried to do.
POWER
OPEN
Disc loading lamp
Disc lamps
DVD / VIDEO CD / CD
PHONES
DVD VCD/CD
EN06-09.KV-DV7[E]_f 01.2.21, 8:41 PM6

ENGLISH
7
Listening with headphones
1Connect the headphones to the PHONES jack
on the unit.
2While holding SHIFT (S), then press
H/P VOL 5or H/P VOL ∞to adjust the
headphones volume.
DO NOT use the headphones while driving. It
is dangerous to shut off the outside sounds
while driving.
To stop playback temporarily
Press 8(STEP). A still picture appears while
playing a DVD or VCD.
• You can advance the still picture frame by
frame by pressing the button repeatedly. (See
page 18.)
To resume playback, press 3.
To stop playback
Press 7.
If you are playing back a DVD or
VCD, this unit can memorize the
end point (“7” appears for a while
on the screen), and when you start
playback again, playback begins from where it
has been stopped. (Resume play)
To eject a disc
1Press OPEN on the unit to open the slot cover.
2 Press 0on the unit (inside the slot cover).
The disc automatically comes out of the
loading slot.
To locate a particular chapter or track
You can move to another chapter or track while
playing a disc.
• Press ¢to go ahead to the beginning of the
next track.
Each time you press the button consecutively,
the beginning of the next tracks is located and
played back.
• Press 4to go back to the beginning of the
current track.
Each time you press the button consecutively,
the beginning of the previous tracks is located
and played back.
If you press and hold the button, you can fast-
forward (by holding ¢) or fast-reverse the play
(by holding 4).
About sounds reproduced through the rear
terminals
• Through AUDIO (L/R):
Analog stereo signals are output.
When playing a source encoded with Dolby
Digital* ( ) or with MPEG Audio,
multichannel signals are mixed to the left and
right front channel signals, then output.
–You cannot reproduce the sound encoded
with DTS Digital Surround** ( ).
• Through DIGITAL OUT:
Digital signals (Linear PCM, Dolby Digital,
DTS Digital Surround) are output through this
terminal. (For more details, see page 35.)
To reproduce the multichannel sounds such
as Dolby Digital and DTS Digital Surround,
connect an amplifier or a decoder compatible
with these multichannel sources to this
terminal, and set “DIGITAL OUT” correctly.
(See page 22.)
–When playing a source encoded with
MPEG Audio, multichannel signals are
mixed to the left and right front channel
signals, then output.
*Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
Confidential unpublished works. © 1992–1997
Dolby Laboratories. All rights reserved.
** “DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
EN06-09.KV-DV7[E]_f 01.3.31, 11:32 AM7

ENGLISH
8
Showing the on-screen bar
You can show the following information on the
screen while a disc is loaded.
To show the disc information, press DISPLAY
(D)/TIME.Each time you press the button,
the following on-screen bar
appears in sequence.
D
TIME
DISPLAY
When a DVD is loaded
1/3 1/25 1/1
00:00:01
OFF/0 ENG 1/1 OFF
Digital
1
6 7 8 9
2 3 4 5
1:Current title and the total number of the
titles on the disc.
(Ex.: 1st title is playing out of 3 titles
recorded.)
2:Current chapter and the total number of
the chapters recorded on the disc.
(Ex.: 1st chapter is playing out of 25
chapters recorded.)
3:Playing time or the remaining time.
(Ex.: Playing time of the title. See page 9
for more details.)
4:Indicates whether the disc contains multi-
angle views.
(Ex.:When only main angle-view is
recorded on the disc without any multi-
angle views. See page 11 for more
details.)
5:Current operation mode.
(Ex.:This appears while playing a disc.)
When a DVD is loaded:
On-screen bar goes off.
1/3 1/25 1/1
00:00:01
OFF/0 ENG 1/1 OFF
Digital
1/3 00:00:01 OFF
PBC
On-screen bar goes off.
When aVCD or CD is loaded:
* This appears only while a VCD is loaded.
About the indications on the on-screen bar
Indications shown on the on-screen bar vary
depending on the disc type and the signals
recorded on the loaded disc.
123
D
MENU
TIME
DISPLAY
TITLE
SEARCH MODE
ENTER
SHIFT CLEAR
REPEAT
RETURN
ZOOM
SLOW
A-B RPT
456
789
S0C
M
POWER
STEP
SUBTITLE AUDIO ANGLE
H/P VOL
H/P VOL SETUP
SHIFT (S)
DISPLAY (D)
TIME
*
EN06-09.KV-DV7[E]_f 01.2.21, 8:41 PM8

ENGLISH
9
6:Indicates whether the disc contains
subtitles.
(Ex.:When no subtitle is recorded on the
disc. See page 10 for more details.)
7:Current selected audio language and the
total number of the audio languages
recorded on the disc.
(Ex.:“ENGLISH” is selected as the only
recorded audio language on the disc. See
page 11 for more details.)
8:Sound mode — Linear PCM (stereo),
Dolby Digital, and DTS Digital Surround.
(Ex.:When the disc is encoded with Dolby
Digital.)
9:Repeat play mode.
(Ex.:When Repeat play mode is set to
“OFF.” See page 16 for more details.)
Checking the playing time
You can also show the elapsed playing time or
the remaining time.
To show the on-screen bar and to change the
playing time information, press DISPLAY (D)/
TIME while holding SHIFT (S).
Each time you press the button, the playing time
information changes on the on-screen bar.
and
D
TIME
DISPLAY
When a DVD is loaded
Elapsed playing time of the current title \
Remaining time of the current title \
Elapsed playing time of the current chapter \
Remaining time of the current chapter \
(Back to the beginning)
00:00:01
00:00:05
-01:54:01
-00:34:09
When a VCD or CD is loaded
00:00:01
00:00:05
-00:04:41
-00:43:09
Elapsed playing time of the current track \
Remaining time of the current track \
Elapsed playing time of the current disc \
Remaining time of the current disc \
(Back to the beginning)
To erase the on-screen bar, press DISPLAY
(D)/TIME twice while playing a DVD, or once
while playing aVCD or CD.
• It is not required to hold down SHIFT (S) to
erase the on-screen bar.
When aVCD or CD is loaded
1:Current track and the total number of the
tracks on the disc.
(Ex.: 1st track is playing out of 3 tracks
recorded.)
2:Playing time or the remaining time.
(Ex.: Playing time of the track. See the
right column for more details.)
3:Repeat play mode.
(Ex.:When Repeat play mode is set to
“OFF.” See pages 16 and 17 for more
details.)
4:Appears only while loading a VCD.
Indicates whether the VCD is recorded
with the PBC function ( ) or without
().
(Ex.:When PBC function is recorded.)
5:Current operation mode.
(Ex.:This appears while playing a disc.)
1/3 00:00:01 OFF
PBC
12345
*
* This appears only while a VCD is loaded.
SHIFT
S
EN06-09.KV-DV7[E]_f 01.2.21, 8:41 PM9

ENGLISH
10
DVD PLAYBACK
3
Some DVDs contain several audio languages,
subtitles, and multi-angle views.
When you find the following marks on the DVD or
its package, you can select these elements
recorded on the DVD.
Subtitles are recorded on the
disc.The number inside the
mark indicates the total number
of the recorded subtitles.
Several audio languages are
recorded on the disc.The
number inside the mark
indicates the total number of
the recorded audio languages.
Multi-angle views are recorded
on the disc.The number inside
the mark indicates the total
number of the recorded multi-
angle views.
Selecting subtitles
While playing a disc containing subtitles in
different languages, you can select the subtitle to
be displayed on the screen.
• You can set your favorite subtitle language as
the initial language shown on the screen.(See
page 21.)
Select a desired subtitle language.
The on-screen menu bar appears
on the screen. Each time you
press the button, the subtitle
language changes.
3
123
D
MENU
TIME
DISPLAY
TITLE
SEARCH MODE
ENTER
SHIFT CLEAR
REPEAT
RETURN
ZOOM
SLOW
A-B RPT
456
789
S0C
M
POWER
STEP
SUBTITLE AUDIO ANGLE
H/P VOL
H/P VOL SETUP
SUBTITLE ANGLE
AUDIO
3
SUBTITLE
EN10-11.KV-DV7[E]_f 01.2.21, 8:42 PM10

ENGLISH
11
To erase the on-screen bar, press DISPLAY
(D)/TIME.
Selecting audio languages
While playing a disc containing audio languages
(sound tracks), you can select the language
(sound) to listen to.
• You can set your favorite audio language as the
initial audio language shown on the screen.
(See page 20.)
Select a desired audio language (sound).
The on-screen menu bar appears
on the screen. Each time you
press the button, the audio
language changes.
Ex.:When the disc has 3 selections —
English, French, and Spanish
To erase the on-screen bar, press DISPLAY
(D)/TIME.
Selecting multi-angle views
While playing a disc containing multi-angle views,
you can view the same scene at different angles.
Select a desired view angle.
The on-screen menu bar appears
on the screen. Each time you
press the button, the view angle
changes.
ANGLE
To erase the on-screen bar, press DISPLAY
(D)/TIME twice.
Ex.:When the disc has 3 multi-angle views
Ex.:When the disc has 3 selections —
English, French, Spanish and no subtitle (OFF)
AUDIO
OFF/3 ENG 1/3 OFF
Digital
ENG 1/3 FRE 2/3
SPA 3/3
OFF/3 ENG 1/3 OFF
Digital
OFF/3 ENG/3
SPA/3 FRE/3
1/3 3/25 1/3
00:00:01
1/3 2/3
3/3
1/3 3/25 1/3
00:00:01 1/3 3/25 2/3 00:00:01
1/3 3/25 3/3
00:00:01
EN10-11.KV-DV7[E]_f 01.2.21, 8:42 PM11

ENGLISH
12
MENU-DRIVEN PLAYBACK
Menu operations
Menu-driven playback is possible while playing
back a DVD with menu-driven features or a VCD
with the PBC function.
While playing a DVD:
DVD discs generally have their own menus or title
lists. A Menu usually contains various information
about the disc and playback selections.On the
other hand, a title list usually contains titles of
movies and songs recorded.
1 Press MENU/SETUP or TITLE.
A menu or title list will appear on the screen.
2 Select a desired item on the menu or
on the title list, using Cursor buttons
(5/∞/3/2) and ENTER.
The unit starts playback of the selected item.
• On some discs, you can also select items
by pressing the Number buttons
corresponding to the item numbers listed.
To erase the menu or title list
Press RETURN until it goes off from the
screen.
• If “ ”appears on the screen when
pressing MENU in step 1, the disc does not
have a menu.
• If “ ”appears on the screen when
pressingTITLE in step 1, the disc does not
have a title list.
MENU
SETUP
or
TITLE
ENTER
H/P VOL
H/P VOL
123
D
MENU
TIME
DISPLAY
TITLE
SEARCH MODE
ENTER
SHIFT CLEAR
REPEAT
RETURN
ZOOM
SLOW
A-B RPT
456
789
S0C
M
POWER
STEP
SUBTITLE AUDIO ANGLE
H/P VOL
H/P VOL SETUP
Cursors
(
5∞ 3 2 )
Numbers
ENTER
MENU
SETUP
TITLE
CLEAR
(C)
3
EN12-19.KV-DV7[E]_f 01.2.21, 8:42 PM12

ENGLISH
13
How to select items using the Number
buttons
• To select number 5, press 5, then ENTER.
• To select number 10, press 1, 0, then
ENTER.
• To select number 23, press 2, 3, then
ENTER.
• To cancel a mis-entry, press CLEAR (C).
Each time you press the button, the last
entry will be erased.
To return to the previous menu
Press RETURN .
To cancel the PBC playback
You can cancel the menu-driven operations (PBC
function):
1Press 7to stop playback.
2 Press the Number buttons to select a track,
then press ENTER.
Normal playback starts from the selected
track.
• You can also turn on and off the PBC
playback by pressing MENU/SETUP
repeatedly.
PBC operation concept
While playing a VCD:
The Playback Control function (PBC) allows you
to operate the VCD using menus.
When you start playback, a menu will
automatically appear on the screen.
• A menu may be a list of items, divided screens,
or some moving pictures. (See “PBC operation
concept” to the right.)
Select a desired item on the menu.
• When a list of items is displayed on the screen,
press the Number buttons to select an item.
• When “3” or “SELECT” is displayed on the
screen, press 3(or ENTER if pressing 3does
not work) to start playback.
123
456
789
0
ENTER
EN12-19.KV-DV7[E]_f 01.2.21, 8:42 PM13

ENGLISH
14
SEARCH FUNCTIONS
Searching for a particular
point
You can search for a particular portion while
playing a disc — Forward/Reverse Search.
Forward Search
To fast-forward the chapter or track, press ¡
while playing a disc.
Each time you press the button,
the search speed changes
as follows:
When playing a DVD or VCD
• No sound comes out during High Speed Search.
• When Low Speed Search sound setting is “ON,”
sounds come out during Low Speed Search. (See
page 24.)
Reverse Search
To reverse the chapter or track, press 1while
playing a disc. Each time you press the button,
the search speed changes
as follows:
When playing a DVD or VCD
No sound comes out during Reverse Search.
123
D
MENU
TIME
DISPLAY
TITLE
SEARCH MODE
ENTER
SHIFT CLEAR
REPEAT
RETURN
ZOOM
SLOW
A-B RPT
456
789
S0C
M
POWER
STEP
SUBTITLE AUDIO ANGLE
H/P VOL
H/P VOL SETUP
SHIFT (S)
Numbers
ENTER
SEARCH
MODE
(M)
1¡
CLEAR
(C)
(Low Speed Search)
(Normal Play)
(High Speed Search)
(Low Speed
Reverse Search)
(Normal Play)
(High Speed
Reverse Search)
EN12-19.KV-DV7[E]_f 01.2.21, 8:43 PM14

ENGLISH
15
Locating a particular point
directly
You can use the following Search Modes to
locate a particular portion directly while playing a
disc.
• For DVD:Title Search, Chapter Search, and
Time Search
• For VCD and CD:Track Search andTime
Search
1 Press SEARCH MODE (M) to select
Search Mode.
The on-screen bar appears on the screen.
When a DVD is playing:
2 Press the Number buttons then
ENTER to select a desired title,
chapter, track or playing time.
The unit starts playback of the selected item.
How to input the title, chapter, and track
number
Press the Number buttons corresponding to
the number, then press ENTER to start its
playback.
• To select number 5, press 5, then ENTER.
• To select number 10, press 1, 0, then
ENTER.
• To select number 23, press 2, 3, then
ENTER.
How to input the playing time
Press the Number buttons to input the
playing time, then press ENTER to start
playback at the selected elapsed playing
time.
• To input time “00:45:23,” press 4, 5, 2, 3,
then ENTER.
• To input time “01:23:45,” press 1,2, 3,4, 5,
then ENTER.
• To cancel a mis-entry, press CLEAR (C).
Each time you press the button, the last
entry will be erased.
To erase the on-screen bar, press DISPLAY
(D)/TIME.
SEARCH MODE
M
123
456
789
0
ENTER
When Search Mode is canceled
You can use the number buttons to directly select
the title number (for DVD) and track number (for
VCD and CD).
Title
Search Canceled
Chapter
Search Time
Search*
--/3 --/25 --:--:--
When a VCD or CD is playing:
*Time Search can be performed only within the
current title (for DVD) and the current track (for
VCD and CD).
Track
Search
Canceled
Time
Search*
--/25 --:--:--
EN12-19.KV-DV7[E]_f 01.2.21, 8:43 PM15

ENGLISH
16
REPEAT PLAYBACK
Playing Repeatedly
Repeat Play
You can repeat a chapter, track, or disc.
To repeat playback, press REPEAT ( )/A-B
RPT while playing or pausing.
The on-screen bar appears.
Each time you press the button,
the repeat mode indication on the
on-screen bar changes as
follows:
REPEAT
A-B RPT
123
D
MENU
TIME
DISPLAY
TITLE
SEARCH MODE
ENTER
SHIFT CLEAR
REPEAT
RETURN
ZOOM
SLOW
A-B RPT
456
789
S0C
M
POWER
STEP
SUBTITLE AUDIO ANGLE
H/P VOL
H/P VOL SETUP
SHIFT (S)
REPEAT
A-B RPT
When a VCD is playing:
Track repeat
• Track repeat: Current track will be
repeated.
• Disc repeat: All the tracks in the disc will
be repeated.
• Repeat OFF: Repeat play is canceled.
T D
OFF
Disc repeat
Repeat OFF
* While playing back a VCD using the PBC function,
Repeat play cannot be used.
When a DVD is playing:
• Chapter repeat:Current chapter will be
repeated.
• Title repeat: Current title will be repeated.
• Repeat OFF: Repeat play is canceled.
Chapter repeat
Repeat OFF
C T
OFF
Title repeat
* On some DVDs, repeat play may be canceled by the
disc itself.
EN12-19.KV-DV7[E]_f 01.2.21, 8:43 PM16

ENGLISH
17
When a CD is playing*:
2 While holding SHIFT (S), press
REPEAT ( )/A-B RPT again to
select the end point.
The repeat mode indication changes as
follows, and A-B Repeat begins.
The unit automatically locates point A and
starts repeated playback of the portion
between points A and B.
To cancel A-B Repeat,press REPEAT ( )/A-B
RPT once while holding SHIFT (S).
To erase the on-screen bar, press DISPLAY
(D)/TIME.
If “ ”appears on the screen when
pressing REPEAT ( )/A-B RPT in step 1,
A-B Repeat cannot be used on the selected
portion.
• On some DVDs, A-B Repeat may not be
used even within the same chapter.This is
due to their disc structures, and not a
malfunction of the unit.
and
REPEAT
A-B RPT
AB
Ex.:When viewing a picture
A-
AB
SHIFT
S
TD
Track repeat
Disc repeat
• Disc repeat: All the tracks in the disc will
be repeated.
• Track repeat: Current track will be
repeated.
*When you start playing back a CD, Disc repeat is
always activated first.
To erase the on-screen bar, press DISPLAY
(D)/TIME.
A-B Repeat
While playing, you can also select a portion you
want to repeat.
• When playing a DVD, A-B Repeat is not
performed between different chapters or
different titles.
1 While holding SHIFT (S), press
REPEAT ( )/A-B RPT to select the
start point.
The on-screen bar appears, and the repeat
mode indication changes as follows:
and
A-
SHIFT
S
REPEAT
A-B RPT
EN12-19.KV-DV7[E]_f 01.2.21, 8:43 PM17

ENGLISH
18
SPECIAL EFFECTS PLAYBACK
Slow-Motion Playback
You can enjoy slow-motion playback while playing
a DVD or VCD.
To start Slow-motion Playback, press SLOW
while playing a DVD or VCD.
Each time you press the button,
the slow motion speed changes
as follows:
To resume normal play
Press SLOW repeatedly until normal play
resumes.
Frame-by-frame Playback
You can advance the picture frame by frame.
1 Press 8STEP once during play.
A still picture appears on the
screen.
2 Press 8STEP repeatedly to advance
the picture frame by frame.
Each time you press the button,
the picture advances frame by
frame.
To resume normal play
Press 3.
SLOW
(Normal play)
/
12
/
14
/
18
/
116
STEP
STEP
123
D
MENU
TIME
DISPLAY
TITLE
SEARCH MODE
ENTER
SHIFT CLEAR
REPEAT
RETURN
ZOOM
SLOW
A-B RPT
456
789
S0C
M
POWER
STEP
SUBTITLE AUDIO ANGLE
H/P VOL
H/P VOL SETUP
Cursors
( 5∞ 3 2 )
8STEP
SLOW
ZOOM
EN12-19.KV-DV7[E]_f 01.2.21, 8:43 PM18

ENGLISH
19
Zoom
You can zoom up a particular portion of the
picture while playing a DVD and VCD.
• You can select the start point of zoom and
adjust how precisely the zoomed-up portion is
moved. (See page 27.)
1 Press ZOOM to zoom in to the
picture. Each time you press the button,
the picture is enlarged as follows:
When playing aVCD
You can only select 2x Zoom.
2x Zoom 4x Zoom
Canceled
2
4
2x Zoom
4x Zoom
2
Ex.:When 2x Zoom is selected
2 Move the enlarged portion on the
screen, using Cursor buttons (5/∞/
3/2).
To cancel Zoom, press ZOOM repeatedly until
normal size screen appears.
2
ZOOM
EN12-19.KV-DV7[E]_f 01.2.21, 8:43 PM19

ENGLISH
20
DVD
DVD SETUP MENU
You can store the initial selection for subtitle
languages, audio languages (sound), and other
settings using the Setup Menu.
• DVD Setup menu can only be displayed while a
disc is not playing.
Setting initial audio language
You can select the initial language for audio
sound.
However, in the following cases, the original
language will be selected as the initial language
regardless of your setting.
– If the language you have selected is not
recorded on the disc.
– If the disc is programed to be played back in
the original language.
To go back to the previous screen during the
procedure, press RETURN .
1 While holding SHIFT (S), press
MENU/SETUP.
Setup Menu appears on the screen.
(“LANGUAGES” must be selected –
highlighted.)
2 Press ENTER.
Language menu appears. (“AUDIO” must be
selected – highlighted.)
3 Press ENTER again.
Audio Language selecting screen appears.
ENTER
ENTER
123
D
MENU
TIME
DISPLAY
TITLE
SEARCH MODE
ENTER
SHIFT CLEAR
REPEAT
RETURN
ZOOM
SLOW
A-B RPT
456
789
S0C
M
POWER
STEP
SUBTITLE AUDIO ANGLE
H/P VOL
H/P VOL SETUP
Cursors
(
5∞ )
Numbers
ENTER
MENU
SETUP
SHIFT (S) CLEAR
(C)
LANGUAGES
AUDIO:AUDIO: ENGLISHENGLISH
SUBTITLE:SUBTITLE: ENGLISHENGLISH
DISC MENU:DISC MENU: ENGLISHENGLISH
RETURN SELECT OK
ENTER
AUDIO
ENGLISHENGLISH HUNGARIANHUNGARIAN
JAPANESEJAPANESE ITALIANITALIAN
GERMANGERMAN YIDDISHYIDDISH
SPANISHSPANISH PORTUGUESEPORTUGUESE
FRENCHFRENCH RUSSIANRUSSIAN
HINDIHINDI CHINESECHINESE
ORIGINALORIGINAL OTHERS 0OTHERS 0
RETURN SELECT OK
ENTER
and
MENU
SETUP
SETUP MENU
LANGUAGES
AUDIO
DISPLAY
RETURN SELECT OK
ENTER
SHIFT
S
EN20-28.KV-DV7[E]_f 01.2.21, 8:44 PM20