JVC RV-NB200BT User manual

Boomblaster
RV-NB200BT
RV-NB300DAB
OPERATING
INSTRUCTIONS
JVCKENWOOD Corporation
ENGLISH

22
Before start-up
ENGLISH
Content
Before switching on the power supply
Safety instructions
Before Start-up
Handling CDs
Worth knowing about USB devices
Component names and functions
Basic functions
Turning on the system
Navigate in menus
Set menu language
Sleep timer
Using CD and USB
Preparation
PlayingbackCDsoraudioles(USB,CD)
Selectingafolder(audiolesonly)
Programmingtracksandles 
- Procedure for audio CD
- Procedureforaudioles
Random play and repeat function
- Procedure for audio CD
- Procedureforaudioles
Using the DAB + radio
Setting the DAB + stations
Selecting a DAB + station
Storing stations in the station memory
Expanded DAB + information
Menu functions DAB +
Using the UKW radio
Setting the FM stations
Storing stations in the station memory
Menu functions UKW
Using BLUETOOTH
Pair BLUETOOTH devices
Playback via BLUETOOTH
Using line-in
Playing an external playback device
Guitar and microphone input
General information
Maintenance and care
Disposal
Technical specifications
Guarantee
2
3
3
6
6
6
8
11
11
11
11
12
13
13
14
14
15
15
15
16
16
16
16
16
17
17
18
18
19
19
19
20
20
20
20
21
21
21
22
22
22
23
24

33
Before switching on the power supply
Safety instructions!
Attention:
Read this page carefully to ensure safe operation of the device.
Read instructions carefully!
– Follow all safety and operating instructions when using this product.
Keep the instructions in a safe place!
– You should keep the safety and operating instructions for future reference.
Follow the warning instructions!
– You should strictly follow all warnings provided on the product and listed in the operating instructions.
1. Clean only with a dry cloth!
– Unplug the mains adapter of this device from the mains socket before cleaning this product. Never
use liquid cleaning detergents or cleaning sprays. Use only a damp cloth for cleaning.
2. Accessories
– Useonlytheaccessoriesspeciedbythemanufacturer.
3. Do not use this device near water
– Thedeviceshouldneverbeexposedtowaterdropletsorwatersplashes,suchasthosefoundnear
abathtub,washbasin,kitchensink,washingmachine,wetbasementorswimmingpool.Neverplace
containerslledwithliquids,suchase.g.owervases,onthedevice.
4. Ventilation
– Slots and openings in the housing are used to ventilate the device to ensure reliable operation of
the device and to protect the device from overheating and possible autoignition. Do not block the
ventilation holes. Install the device according to the manufacturer's instructions. Never block the ven-
tilationholesbyplacingthedeviceonabed,sofa,rug,orsimilarsoftsurfaces.Thisdeviceshouldnot
be installed in a bookshelf or built-in wardrobe unless adequate ventilation is ensured.
5. Power supply
–This device may connected only to the mains voltage indicated on the device. If you are unsure about the
typeofpowersupplyinyourhome,contactyourspecialiseddealerorpowercompany.
6. Power cord
– Make sure that you can not trip over the cable or that it is being bent in the immediate vicinity of a
poweroutlet,includingauxiliarysockets.Forpluggableequipment,thesocket-outletshallbeinstalled
near the equipment and shall be easily accessible.
7. Thunderstorm
– The device should be disconnected from the mains during thunderstorms and if it is not used for a
long time.
8. Overload
– Neveroverloadmainssockets,extensioncordsormultiplesockets,otherwisethereisariskofreor
electric shock.

4
9. Penetration of foreign material and liquid
–Becarefulnottoallowforeignmaterialorliquidtoenterthisdevicethroughholes,otherwiseitmay
comeintocontactwithhighvoltagecomponentsorshortcircuitresultinginareorelectricshock.
Never spill liquids of any kind on this device.
10. Maintenance
–Neverattempttocarryoutthemaintenanceofthisdeviceyourself,becauselivepartscanbe
exposedthroughtheopeningsorbyremovingcovers,contactingwhichcanbehazardous.Leaveall
maintenanceworktoqualiedservicepersonnel.
11. Damage requiring repair
–Maintenanceandrepairworkshouldonlybecarriedoutbyaqualiedcustomerservice.
Maintenance/repairisrequiredifthedevicehasbeendamagedifliquidhasenteredthedevice,if
objectshaveenteredthedevice,ifthedevicehasbeenexposedtorainormoisture,whenitstops
working properly or has fallen down.
12. Spare Parts
–Ifreplacementpartsarerequired,makesurethatthecustomerservicetechnicianusesspareparts
speciedbythemanufacturerorthathavethesamecharacteristicsastheoriginalparts.Unauthori-
sedpartsmaycausere,electricshockorotheraccidents.
13. Safety test
–Aftercompletingserviceorrepairofthisdevice,askthecustomerservicetechniciantoperforma
safety test to determine if the equipment is in good order.
14. Heat
–Donotinstallthedevicenearhotsurfaces,suchasradiators,fanheaters,stovesorotherdevices
(includingampliers)thatcanbehot.Neverplaceobjectswithopename,suchascandlesorlan-
terns,onornearthedevice.Theinstalledbatteriesshouldnotbeexposedtoexcessiveheatsuchas
directsunlight,reorthelike.
15. Battery and accumulator
-Ifyoudonotusethedeviceforamonthormore,removethebatteriyfromthebatterycompart-
ment of the remote control to prevent leakage. Immediately dispose of leaking batteries properly and
observe all legal regulations. Leaking batteries can cause injury and damage the device.
Tominimizetheriskofelectricshock,re,etc.
-donotremovescrews,coversorbodyparts.
- the power button does not completely disconnect the power supply in any position.
Inordertodisconnectthedevicefromthepowercompletely,unplugthepowercordfromthesocket
and remove any built-in accumulator.

5
Caution!
Danger of explosion in case of:
- highorlowextremetemperaturestowhichabatterymaybeexposedduringuse,storageor
transport;
- low air pressure at high altitude;
- thereplacementofabatterybyanincorrecttypethatcanbypassafuse(forexample,somelithium
batterytypes);
-thedisposalofabatteryinreorahotoven,orthemechanicalcrushingorcuttingofabattery;
- leaving a battery in an extremely high temperature environment that may cause an explosion or
leakageofammableliquidsorgases;
- extremelylowairpressure,whichmaycauseanexplosionorleakageof
ammableliquidsorgases.
EU Declaration of Conformity
Hereby,JVCKENWOODCorporationdeclaresthattheradioequipmenttypeRV-NB200BTandRV-
NB300DABcomplieswithDirective2014/53/EU.ThefulltextoftheEUDeclarationofConformityis
available at the following Internet address:
http://www3.jvckenwood.com/ecdoc/
Manufacturer:
JVCKENWOOD Corporation
3-12.Moriyacho,Kanagawa-ku,Yokohama-shi,Kanagawa221-0022,JAPAN
Authorised Representative (EU):
JVCKENWOOD Deutschland GmbH
Konrad-Adenauer-Allee1-11,61118BadVilbel,GERMANY
IMPORTANT FOR LASER PRODUCTS
1. CLASS1LASERPRODUCT
2. CAUTION:Donotopenthecasing(Besidesofaccessingthecompartmentfortheaccu-
mululator)Thedevicecontainsnouserserviceableparts;Maintenanceshouldonlybecarriedout
byqualiedpersonnel.Openthecompartmentfortheaccumulatoronlyincaseofswitchedofand
completely dsconnected from the mains power grid.
Automatic energy saving function
The stereo system is equipped with an automatic energy saving function. This switches to standby
modeafter15minutesunderthefollowingconditions:
1. ThereisnoCDinsertedortheCDplayerdidnotstart
2. TheUSBportisnotassigned,ortheplaybackfunctiondidnotstart
3. STOP or PAUSE in CD or USB mode
4. IntheAUX-INmodewithoutmusicplayback
5. STOPorPAUSEinAUX-INmode
6. InBLUETOOTHmodewithoutdeviceconnection
7. With BLUETOOTH connection without audio playback

6
Before start-up
First use
WhenswitchingthedevicetoDAB+*forthersttime,anautomaticDAB+stationsearchisiniti-
ated.Pleasewaituntilthisprocessiscompleted.Formoreinformation,pleaserefertothesection
"UsingtheDAB+Radios".(Only*RV-NB300DABmodel)
Handling of CDs
Precautions for handling
Hold the CD so that you do not touchthesignalsurface.(Theunprintedsideistheplayingside.)
Precautions regarding CDs
Use only use CDs with marking.Insomecases,CDswiththismarkingmaynot play back pro-
perly.
Worth knowing about USB devices
Notes on using a USB device
Thisdeviceiscapableofplayingaudiolesstoredonaashmemoryordigitalaudioplayerifthese
deviceshaveaUSBport(thesedevicesarereferredtoasUSBDevicesinthisdocument).
The following restrictions apply to the usable USB Devices:
Usable USB Devices
• USB Devices that belong to the USB Mass Storage Class.
•USBDeviceswhosemaximumpowerconsumptionis500mAorless.
•USBMassStorageClass:USBDevicesthatthePCrecognizesasexternalstoragewithouttheneed
for a special driver or application software.
•ConsultyourdealerifyouarenotsurewhetheryourUSBdevicecomplieswiththespecicationsfor
the USB Mass Storage Class.
• Using a USB device that is not supported may result in erroneous playback or display of the audio
le.
EvenifyouuseaUSBdevicethatmeetstheabovespecications,audiolesmaynotplaybackpro-
perly depending on the type or condition of the USB device.
Note on the Operating Instructions:
AlldataonDAB+referonlytotheRV-NB300DABmodel.

7
Before start-up
Unpacking
Carefully unpack the device and make sure all accessories are present:
The remote control
• Insertthebatteryintotheremotecontrol,observingthecorrectpolarity(+and-).
• The supplied battery is intended for functional testing and may have a limited lifetime.
•Iftherangeoftheremotecontroldecreases,replacetheoldbatterywithanewone.
•Exposingtheremotecontrolsensortodirectsunlightorhigh-frequencyuorescentlightmaycause
 malfunction.Insuchcases,youshouldmovethesystemtoadifferentlocationtoavoidsuch
malfunction.
• Operating instructions
• Remote Control
• BatteryLR03/AAA
• Power cord
• Carrying strap
• 2xfasteningbuckleforcarryingstrap
1-Standby/On
2-Clock
3 - Alarm clock / sleep timer
4-LightingEffects
5-Memory/Program
6-FastRewind/Previous
7 - Play / Pause
8-Folderselectionbackward
9 - Folder selection forward
10-Backwardsearch/10-foldtrackjumpbackward
11-Forwardsearch/10-foldtrackjumpforward
12-Lowerthevolume
13-Equalizer
14-Echomicrophoneinput
15-SourceSelection
16-Repeat/Menu
17-Fastforward/Next
18-Information/Random
19-Stop/AutoTune
20-Increasethevolume
21-Muting
2
3
4
1
6
7
8
9
10
5
11
12
13
14
15
16
17
18
19
20
21
Note:Bybrieypressingthekey,thefunctiondescribedabovethekeyisactivated.Toperformthe
functiondescribedonthekey,pressandholdthekey.

8
Components and functions
Front side:
Backside:
1234 5 6 7810 11 12 13 14 15 916
1-Standby/On
2-Play/Pause
3 - Source Selection
4-Equalizer
5-Speakereffectlighting
6-Headphoneport
7-AUX-Inport
8-Volume
9 - Display
10-USBport
11-Menu
12-Stop
13-Previous
14-Next
15-Clock
16-Bass
1 2 34
1-ACPowerInlet
2-Batterycompartment
3 - Microphone input
4-Guitarinput
5-ScrewtoopenBatteryCompartment(seepage10)
6-Antenna
5 6
左右侧盖 黑色注塑，表面蚀纹
黑色注塑，表面晒细纹
HIPS
HIPS
厚度0.6mm，网孔Φ1.8mm，孔间距2.5mm，哑黑色喷粉
黑色注塑，表面晒超细纹
黑色注塑,表面蚀纹
透明镜片，背面四周一圈丝印黑色
黑色注塑，表面蚀细纹，Pantone877C丝印字符
PMMA
SPCC
HIPS
HIPS
大旋钮
CD 仓门
仓门开关帽
LCD镜片
开关按钮 HIPS
左按键 黑色注塑，表面水平横向拉丝+C角高光, 丝印字符Pantone Cool Gray 4C
认证确认
编号审核
VX912V1FP-RV-NB300DAB-S VX912DAB
面板丝印图
B
前喇叭网
德国JVC
3.07.H.X912LA1SER
3.04.H.VX912001ER
3.07.H.VX912A1SER
3.10.3.VX912001ER
3.11.H.VX912001ER
3.05.H.VX912001ER
3.20.4.VX912001ER
2.23.1.VX912001ER
USB
MUTE
PHONES
EQ
CLOCK
AUX IN
MUTE
EQ
CLOCK
右按键
前壳
HIPS
HIPS
HIPS 黑色注塑，表面蚀细纹， 丝印字符Pantone Cool Gray 4C
黑色注塑，表面水平横向拉丝+C角高光, 丝印字符Pantone Cool Gray 4C
3.07.H.X912RA1SER
3.01.H.VX912A2SER
MENU
MENU
BASS
BASS
Please see instruction manual
电池盖（外盖） ABS 黑色注塑，表面蚀细纹， 丝印字符Pantone Cool Gray 4C
CD托盘 HIPS 黑色注塑，表面蚀粗纹
3.37.2.VX912001ER
3.22.0.VX912004ER
左右侧盖 黑色注塑，表面蚀纹
黑色注塑，表面晒细纹
HIPS
HIPS
厚度0.6mm，网孔Φ1.8mm，孔间距2.5mm，哑黑色喷粉
黑色注塑，表面晒超细纹
黑色注塑,表面蚀纹
透明镜片，背面四周一圈丝印黑色
黑色注塑，表面蚀细纹，Pantone877C丝印字符
PMMA
SPCC
HIPS
HIPS
大旋钮
CD 仓门
仓门开关帽
LCD镜片
开关按钮 HIPS
左按键 黑色注塑，表面水平横向拉丝+C角高光, 丝印字符Pantone Cool Gray 4C
认证确认
编号审核
VX912V1FP-RV-NB300DAB-S VX912DAB
面板丝印图
B
前喇叭网
德国JVC
3.07.H.X912LA1SER
3.04.H.VX912001ER
3.07.H.VX912A1SER
3.10.3.VX912001ER
3.11.H.VX912001ER
3.05.H.VX912001ER
3.20.4.VX912001ER
2.23.1.VX912001ER
USB
MUTE
PHONES
EQ
CLOCK
AUX IN
MUTE
EQ
CLOCK
右按键
前壳
HIPS
HIPS
HIPS 黑色注塑，表面蚀细纹， 丝印字符Pantone Cool Gray 4C
黑色注塑，表面水平横向拉丝+C角高光, 丝印字符Pantone Cool Gray 4C
3.07.H.X912RA1SER
3.01.H.VX912A2SER
MENU
MENU
BASS
BASS
Please see instruction manual
电池盖（外盖） ABS 黑色注塑，表面蚀细纹， 丝印字符Pantone Cool Gray 4C
CD托盘 HIPS 黑色注塑，表面蚀粗纹
3.37.2.VX912001ER
3.22.0.VX912004ER

9
Components and functions
Open the CD compartment
Turnthelock(1)slightly90degreescounter-clockwiseto
open the CD compartment.
Toclosethelid,closeitbyhanduntilthelockengages
again.
1
Mounting the carrying strap
1.Takeoneendofthestrapwiththehempointingupwards,and
threaditfrombelowintothebuckle(1).Pleasepayattentiontothe
correct alignment of the buckle. Insert the strap from above into the
secondopeningofthestrapbuckle(2)andpullthestrapoutofthe
buckleapprox.20cm.
2.Theendofthestrapisnowinsertedintothecasing
holder(3)andpulledoutofthesecondcasingholder(4).
3.Threadthestrapbackthroughthebuckle,pushingin
theendoverthepreviousbeltrout.Tightenthestrap,
making sure the strap can not slip out of the buckle. With
theothersideofthebeltpleaseproceedtopoint1.
Fig. B
1
2
34



   
 

 *u u


 



左右侧盖 黑色注塑，表面蚀纹
黑色注塑，表面晒细纹
HIPS
HIPS
厚度0.6mm，网孔Φ1.8mm，孔间距2.5mm，哑黑色喷粉
黑色注塑，表面晒超细纹
黑色注塑,表面蚀纹
透明镜片，背面四周一圈丝印黑色
黑色注塑，表面蚀细纹，Pantone877C丝印字符
PMMA
SPCC
HIPS
HIPS
大旋钮
CD 仓门
仓门开关帽
LCD镜片
开关按钮 HIPS
左按键 黑色注塑，表面水平横向拉丝+C角高光, 丝印字符Pantone Cool Gray 4C
认证确认
编号审核
VX912V1FP-RV-NB300DAB-S VX912DAB
面板丝印图
B
前喇叭网
德国JVC
3.07.H.X912LA1SER
3.04.H.VX912001ER
3.07.H.VX912A1SER
3.10.3.VX912001ER
3.11.H.VX912001ER
3.05.H.VX912001ER
3.20.4.VX912001ER
2.23.1.VX912001ER
USB
MUTE
PHONES
EQ
CLOCK
AUX IN
MUTE
EQ
CLOCK
右按键
前壳
HIPS
HIPS
HIPS 黑色注塑，表面蚀细纹， 丝印字符Pantone Cool Gray 4C
黑色注塑，表面水平横向拉丝+C角高光, 丝印字符Pantone Cool Gray 4C
3.07.H.X912RA1SER
3.01.H.VX912A2SER
MENU
MENU
BASS
BASS
Please see instruction manual
电池盖（外盖） ABS 黑色注塑，表面蚀细纹， 丝印字符Pantone Cool Gray 4C
CD托盘 HIPS 黑色注塑，表面蚀粗纹
3.37.2.VX912001ER
3.22.0.VX912004ER



   
 

 *u u


 






   
 

 *u u


 




10
ArechargeablebatteryisavailablefortheRV-NB200BTandRV-NB300DAB.Toinstallthebatteryin,
please proceed as follows:
Components and functions
Installing the optional BN-R5000 battery
Attention: Use only the battery pack BN-R5000! Risk of explosion if the battery is replaced by
an incorrect type.
•Removethebatterycompartmentcoverlockingscrew(indicatedbyarrowmarking 5,seepage8)
with a suitable Phillips screwdriver.
• Press down the left and right latches of the lid and remove them.
• The battery should be positioned so that the connection cable is pointing to the left and the
screwed bottom is down.
• Connect the connecting cables and carefully insert the battery into the battery compartment. The
connection cable is stowed on the left side of the compartment. Avoid crushing the cables.
• Put the lid back into the battery compartment and snap the two tabs into the compartment.
Then insert the screw and tighten.
The battery is being charged in the device. You can read the charge status in the display as a symbol
display.
Pleasenote:Inbatterymode,thisdevicecannotbeturnedonwithremotecontrol.Thisistoextend
the lifetime of the battery.
Ifyoudisposeoftheproduct,pleaseremovethebatterypackforseparatedisposal.

11
Basic functions
Connect the power cord to the device and to a suitable power outlet.
Telescopic antenna
1. Thetelescopicantennaislocatedonthetopofthedevice,totheleftoftheCDcompartment.
2. Pulloutalltheelementscompletely.
3. Align the antenna for the best reception.
Power On
Press the button on the remote control or on the device. The display will show
"JVC Boomblaster". Press the button again to switch off the device.
Volume control
Turn the "VOL" knob on the device or press the “VOL +/-" button on the remote control to increase
or decrease the volume. The selected volume is displayed graphically.
Temporarily turning off the volume: Todothis,pressthe button on the remote control. The
"MUTE" ashesinthedisplay.Thenexttimethebuttonispressed,theoriginalvolumeisrestored.
Selecting a Source
Press the "button on the main device or on the "SOURCE" button on the remote control to select
the desired playback source.
Equalizer
Press the
EQ button on the remote control to successively enter the following settings: ROCK ->
JAZZ -> POP -> CLASSIC -> FLAT ->
Using the "BASS"buttononthedevicea2-stagebassamplicationcanbecalledup.
Navigate in menus
Toenterthemenu,pressthe"MENU" button on the device. The selection of the menu item or the
setting of numbers is done via or buttons,theconrmationbypressingtheuII button.
Setting the menu language
1. TurnonthedeviceandselectthesourceUSB.
2. Pressthe"MENU" button,andthe"System"menuwillappearinthedisplay.Thenconrmwith
the uII button.
3. By pressing the buttons or select the "Language"menuandthenconrm.
4. Usethebuttons or toselectandconrmthedesiredlanguage.

12
Basic functions
Setting the display illumination
The display illumination can be programmed in 3 brightness levels. The following settings are possible
in the "Backlight" menu:
"Dim Level": Brightness of the display when the radio is switched on.
Choices: "High" / "Medium" / "Low"
"On Level": Brightness adjustment for operation and standby.
Choices: "High" / "Medium" / "Low"
"Timeout": Time until the display is adjusted to the lighting level in the "Dim setting".
Choices: "On / 10 sec / 20 sec / 30 sec / 45 sec / 60 sec / 90 sec / 120 sec / 180 sec"
"On" means that the radio always remains in the brightness level of the"On setting”.
For adjustment, please proceed as follows:
1.TurnonthedeviceandselectthesourceUSB.
2.Pressthe"MENU"button,usingtheuII select the "System" menu.
3. Use the buttons or to select the menu "Backlight" andconrm.
4.Selectthe functions in the individual menus "On Level" / "Dim Level" / "Timeout” and
 conrmwiththeuII button.
Setting the sleep timer
The sleep timer is used to automatically turn off the device after a preset period of time. For adjust-
ment,pleaseproceedasfollows:
1.TurnontheradioandselectthesourceUSB.
2.Pressthe"MENU",usinguII select the"System" menuandconrmwiththeuII button.
3. Using the buttons or select the menu "Sleep" andconrm.
4. Inthefollowingmenu,selectthedesiredlengthoftheruntime.ConrmwiththeuII button.
5.Thedisplayshows"SL" in the middle line on the left to indicate an active sleep timer. If you would
 liketodeactivatethesleeptimer,pleaseselectthetimesetting"Off".
Setting the time
WhenreceivingaDAB+orFMstationinsufcientquality,theclockwillbesetautomatically.De-
pendingonthereceptionstrength,thisprocessmaytakesometime.Ifnocorrespondingstationis
available,youcanalsosetthetimemanually:
1.TurnontheradioandselectthesourceUSB.
2.Pressthe"MENU" button,usetheuII button to select the "System" and press this
 buttononceagain.Alternatively,youcanusethe"CLOCK" button on the remote control.
3. Use the button or to select the"Time"andusetheplay/pausebuttontoconrm.
4.Select"Set Time/Date"andconrm.Thenselect,setandconrmhours,minutes,day,month
and year.

13
Basic functions
Additional settings in the "Time" menu
The following functions can be set in the "Time" menu:
"Auto Update": Setting from which source the time is automatically retrieved.
Choices: "Update all" / "Update DAB" / "Update FM" / "No update"
"Set 12/24 hours": Setting the time format.
Choices:"Set24hours"/"set12hours"
"Set date format": Setting the date format
Choices: "DD-MM-YYYY" / "MM-DD-YYYY"
Effect lighting of the speakers
The Boomblaster is equipped with LED effects in the front speakers. Using the "LIGHT" button you
canset5differentmodesontheBoomblaster.
Using CD and USB
Preparation
Insert a CD
1.OpentheCDcompartmentasdescribedonpage9ofthismanual.
2.PlaceaCDwiththeprintedsidefacingupintheCDcompartment.
3. Close the CD compartment.
Connecting USB devices
1.Pressthe“Source” button to select USB mode.
2. Connect the USB device to the USB port on the front panel.
Remove the USB device
1.Pressthe button to select standby mode.
2. Remove the USB device from the USB port.
• Always wait until the device has completely read the CD/USB device before proceeding.
•IfnoCDisloadedinthedisctray,"NO DISC" will be displayed.
•IfthereisnoplayableaudioleintheUSBdevice,"NO FILE" is displayed.
•Foraudioles,thereadtimemayexceed10secondsifthereisalotofmusic on a CD or USB
device.

14
Playing a CD or audio file (USB, CD)
On the remote: Use the "SOURCE" button to select the source and press uII button to start the
playback.
On the main device: Use the "button to select the desired source and press the uII button to
start playback
ForUSBdevicesorCDscontainingaudioles(suchasMP3),thenumberofexistingfoldersandles
is displayed as follows:
F--xx t--XXX
The number behind "F" standsforthenumberoffoldersandthe2numberblockthetotalno.oftracks.
ForaudioCDs,informationaboutthenumberoftracksandtotalplayingtimeisdisplayedasfollows:
XX XX:XX
Therstnumberblockstandsforthenumberoftracksandthe2forthetotalplayingtimeoftheCD.
Basic operating functions
Stop playback: Press the button on the device or on the remote control to stop the playback.
Interrupt the playback: Press the uII
button on the device or on the remote control to interrupt the
playback.Thesignalashesonthedisplay.Anotherpressingofthebutton resumes playback.
Searching for a specific passage during playback: Press and hold the or button on the
deviceorontheremotecontrolmorethan2secondstoactivatefast reverse or fast forward. Once
thedesiredpositionhasbeenreached,releasethecorrespondingbutton.
Select a specific track: Press the or button on the main devise or on the remote control in
playback,pauseorstopmode.
Jump every 10 track: Press the +10 or -10 buttonontheremotecontrolinplay,pauseor stop
mode.
Select a specific folder (audio files only): Press on the
Fold+
or
Fold-
on the remote control to select a
folder.
Display the ID3 information: Press the "INFO" button on the remote control to display ID3 tags.

15
Programming tracks and files
YoucanusetheremotecontroltoprogramtracksonanaudioCDorlesina sequence of your
choice. The following number of storage locations is available:
 AudioCD:20memoryslots Files:99memoryslots
Procedure for audio CD
1.Thesource"CD"mustbeinstopmode,otherwisenoprogrammingispossible.
2.Pressthe PRG button to start the programming mode.
3. The display now shows "P01 T--001".Thesecondnumberblockshowsthecurrenttrack,therst
number block the current memory location.
4.Usethe or button to select the track you want to save to the current memory location.
5.Pressthe PRG buttontoconrmtheoperation.
6.Afterthat,thenextmemorylocationwillbedisplayed.Repeatsteps4and5untilyourselectionis
complete or the number of memory slots is full. In this case "Full" appears in the display.
7. Using the uII button you can start the playback of the programmed tracks.
8.Pressingthe button twice clears the programming.
Procedure for audio files
1.Thesource"USB"mustbeinStopmode,otherwisenoprogrammingispossible.
2.Pressthe PRG button to start the programming mode.
3. The display now shows "P01 F--01 001"an.Therstnumberblockshowsthecurrentmemory
 location,thesecondnumberblockthecurrentfolderandthethirdblockthecurrenttracknumber.
4. Using the
Fold+
or
Fold-
button you can select a folder or keep the current folder.
5.Usethe or button to select the track you want to save to the current memory location.
6.Pressthe PRG buttontoconrmtheoperation.
7.Afterthat,thenextmemorylocationwillbedisplayed.Repeatsteps4and6untilyourselectionis
complete or the number of memory slots is full. In this case "FULL" appears in the display.
8.Usingthe uII button you can start the playback of the programmed tracks.
9. Pressing the button twice clears the programming.
• If the buttonispressedduringprogramming,theprocessisaborted.Switchingoffthe device
deletes an existing program.

16
Random playback and repeat function
Procedure for audio CD
• Press the "RANDOM" button on the remote control to start random playback. Pressing the
"RANDOM" or pressing the button will cancel random playback.
• Press the "REPEAT" button on the remote control to activate the repeat function. Repeated
pressing switches the following functions:
Repeat thecurrenttrack(Display"REP-1")
Repeatalltracks(display"REP-ALL")
Press the
uII button to start playback.
Pressing the button turns off the repeat function.
Procedure for audio files
• Press the "RANDOM" button on the remote control to start random playback. Pressing the
"RANDOM" or pressing the button will cancel random playback.
• Press the "REPEAT" button on the remote control to activate the repeat function. Repeated
pressing switches the following functions:
Repeat thecurrenttrack(Display"REP-1")
Repeatthecurrentfolder(Display"REP-DIR")
Repeatalltracks(display"REP-ALL")
Press the
uII button to start the repeat function.
Pressing the button turns off the repeat function.
Using the DAB + radio (RV-NB300DAB)
Press the"SOURCE" button on the remote control or the"button on the device until "DAB"
appears in the display.
Start the automatic station search
• Press the "MENU" button on the device to enter the DAB menu.
The display shows "Full search". Start the search with the II uII button.
•Duringthesearch,thedisplaywillshowthenumberofstationsfoundsofar.
 Ifnostationsarefound,"No DAB Station"willbedisplayedforapprox.2secondsandthen
changes to "Full scan".
 Pleasecheckthecorrectorientationoftheantennaortrytondanotherlocationforthedevicefor
better reception.

17
Manual tuning of ensembles
• Press the "MENU" button on the device to enter the DAB menu.
• Press the button until "Manual tune" appears in the Display.
• Pressing the uII buttonconrmsthefunctionandthecurrentlysetchannelwiththecorresponding
frequency is shown in the display.
• Press the button to manually select another channel.
• Press uII toconrmtheselection.Afterthat,thesignallevelisshowninthedisplay,another press
loads the current ensemble.
Selecting a DAB + station
The stations stored alphabetically in the station list can be called up as follows:
• Press the TUN+ or TUN- button on the remote control to scroll backwards or forwards in the
station list.
•Whenthedesiredstationisselected,pressthe uII button on the remote control to start playback.
The Display will show"Playing".
•Ifthereceptionlevelontheselectedstationisinsufcientfortrouble-freeplayback,"Service not
available" appears in the display. In this case please select another station.
Storing stations in the station memory
TostoreDABstationsforeasierretrieval,30memoryslotsareavailable.Toassignthememory,please
proceed as follows:
• Select a station to save
• Press the PRG button until the "Preset Store" and a memory location is showed on the Display.
An empty memory location is displayed with"Empty",anassignedmemoryspacewiththenameof
the sender. You can also reassign an already assigned memory.
• Use the or buttons to select a memory location.
•Brieypressthe uII button to save the station. Thedisplaybrieyshows"Preset X Stored".
• The stations can now be selected using the or button on the device.

18
Expanded DAB + information
With DAB + additional information is transmitted in addition to the music signal. These can be retrie-
ved as follows.
Press the "INFO" button on the remote control to retrieve the following information in succession:
• Signal level: The display shows the level using icons from left to right.
 Themoreiconsdisplayed,thebetterthereception.
• PTY (Program Type):Thisdesignatestheclassicationofthestationsaccordingtogenre,e.g.Pop,
 News,Religion,Info,Classics,etc.
•Nameoftheensemble,e.g.DRGermany
• Display of channel and frequency of the set station
• ERR XX: This information shows the error rate of the digital reception. This is also dependent on
the signal level and can also be used to align the antenna.
• XX kbps:Displayofthedatarateofthestatione.g.80kbit/s.Thedataratemayvaryfromstation
to station.
• DABPLUS: Designates the reception mode "DAB +".
• Current date
Menu functions DAB +
Pressing and holding the"MENU" button opens a menu in which you can set various functions for
DAB+. Use the or buttons to scroll through the menu. The following functions are available:
• Full scan:Anotherautomaticstationsearch.Conrmthefunctionwiththe uII button.
• Manual tune:Thisallowsyoutomanuallysetaspecicreceptionstation.Usingthe uII button
 conrmsthefunctionandshowsthecurrentlysetstationwiththecorrespondingfrequency.
• Press the or button to manually select another channel. Using the uII button you can
 conrmtheselection.Afterthat,thesignallevelisshowninthedisplay,anotherpresschargesthe
current ensemble.
• DRC (Dynamic Range Control):Ifsupportedbytheselectedstation,itispossibletoadjustthe
dynamic range. Possible settings are "Off","Low" and "High". The selection is made using the
or buttons,theselectionisconrmedwiththe uII button.
• PRUNE: This deletes invalid stations from the station list. Select "Yes/No" using the or ,
 buttonsandconrmtheselectionwiththe uII button.
• SYSTEM: Settingsforsleeptimer,time,backlight,languageandfactorysettings,softwareupgrade
and software version.

19
Using the UKW radio
Press the"SOURCE" button on the remote control or the "button on the device until "FM"
appears in the display.
Setting an FM station
• Press the TUN+ button on the remote control to increase the reception frequency.
• Press the TUN- button on the remote control to decrease the reception frequency.
• If your press and hold the TUN+ or TUN- buttonsanautomaticstationsearchstarts,which
stops at the next station found.
Usage of Radio Data System (RDS)
RDS is a broadcast system in which FM stations transmit useful information along with the actual
broadcast signal. These can be extracted from the normal transmit signal and used for a number of
additional functions.
RDS functions
The following information can be retrieved by repeatedly pressing the "INFO" key:
•PTY(ProgramType)-IfnoPTYsignalissentfromthestation,"None" will be displayed.
• Frequency and memory location of the received station
• Stereo / Mono display
• Date – If no date signal is sent by the station"1-1-2019" appears.
Inthecaseofinsufcientreceptionconditions,thereceptionofthesignalsmaybeinterruptedornot
possible.
Storing stations in the station memory
TostoreUKWstationsforeasierretrieval,30memoryslotsareavailable.Toassignthememory,please
proceed as follows:
• Select a station to save.
• Press and hold the PRG button until the "Preset Store" and a memory location is showed on the
Display. An empty memory location is displayed with "Empty",anassignedmemoryspacewiththe
name of the sender. You can also reassign an already assigned memory.
• Use the or buttons to select a memory location.
•Brieypressthe uII button to save the station. Thedisplaybrieyshows"Preset X Stored".
• Or press on the "AUTO" button on the remote control to start a channel search with automatic
storage of the found stations.
• The stations can now be selected with or buttons.

20
Menu functions UKW
Pressing and holding the"MENU" button opens a menu in which you can set various functions for
FM. Use the or buttons to scroll through the menu. The following functions are available:
• Scan settings: This allows you to set which stations are to be considered when searching for
automatic storage. Possible settings are "All stations" or "Strong stations only".Conrmthe
function with the uII button.
• Audio Settings: Setting for "Mono" or "Stereo" reception. The selection is made using the or
buttons,theselectionisconrmedwiththe uII button.
• SYSTEM: Settingsforsleeptimer,time,backlight,languageandfactoryreset,softwareupgrade
and software version.
Using BLUETOOTH
Press the "SOURCE" button on the remote control or the
"
button on the device until "Bluetooth"
appears in the display.Ifnopaireddeviceisnearby,"Not Connected" ashesinthedisplay.
Pair BLUETOOTH devices
TheBLUETOOTHfunctionallowsthewirelesstransmissionofmusicles(audiostreaming)tothe
system.Topairdevices(suchassmartphones),proceedasfollows:
1.OpenthepairingfunctiononyourBLUETOOTHdeviceanddependingonthedevicemodelsearch
for "Boomblaster".
2. Select the appropriate device for pairing and wait until "Connected" appears in the display. The
pairing is now complete.
3.IfyourBLUETOOTHdeviceasksfora4-digitPIN,pleaseenter"0000".
4.TheBLUETOOTHdeviceisnowstoredandwillautomaticallybepairedinthefuture.
5.ToconnectanotherBLUETOOTHdevice,pleaserepeatsteps1-3.
Playback via BLUETOOTH
Totransfermusicviaaudiostreaming,pleaseuseamusicplayerofyourchoiceontheBLUETOOTH
device.
The following control options are now available:
• Press uII to pause or resume playback.
• Press the or button to skip to the previous or next track.
•Ifyouswitchtoanothersource,theBLUETOOTHconnectionislost.Toreconnect,gobackto
BLUETOOTH.
IftheBLUETOOTHconnectionshouldbedisconnectedduetolongerdistances,anautomaticconnec-
tion will be made as soon as the distance is reduced again.