JVC AV28CT1EKS User manual

No.51952
AV28 CT1EKS / AV28CT1EK
B
AV28CT1EPS / AV28CT1EP
B
AV28 CT1EIS
1COPYRIGHT © 2002 VICTOR COMPANY OF JAPAN, LTD.
Mar. 2002
AV28CT1EKS / AV28CT1EKB
AV28CT1EPS / AV28CT1EPB
AV28CT1EIS
CONTENTS
!SPECIFICATIONS ････････････････････････････････
････････････････････････････････････････････････････････････････
･････････････････････････････････････････････････････････････
･･････････････････････････････････････････････････････････
･････････････････････････････ 2
!SAFETY PRECAUTIONS ････････････････････････････････
････････････････････････････････････････････････････････････････
･･･････････････････････････････････････････････････････
･･････････････････････････････････････････････
･･･････････････････････ 4
!WAR NING ････････････････････････････････
････････････････････････････････････････････････････････････････
････････････････････････････････････････････････････････････････
････････････････････････････････････････････････････････････････
･･･････････････････････････････････
･･････
･･･ 5
!FEATURES････････････････････････････････
････････････････････････････････････････････････････････････････
････････････････････････････････････････････････････････････････
････････････････････････････････････････････････････････････････
･･･････････････････････････････････
･･････
･･･ 6
!MAIN DIFFERENCE LIST ････････････････････････････････
････････････････････････････････････････････････････････････････
･･･････････････････････････････････････････････････････
･･････････････････････････････････････････････
･･･････････････････････ 6
!SPECIFIC SERVICE INSTRUCTIONS ････････････････････････････････
････････････････････････････････････････････････････････････････
･････････････････････････････････････････････
･･････････････････････････
･････････････ 7
!SERVICE ADJUSTMENTS ････････････････････････････････
････････････････････････････････････････････････････････････････
･････････････････････････････････････････････････････
･･････････････････････････････････････････
･････････････････････ 13
!PARTS LIST ････････････････････････････････
････････････････････････････････････････････････････････････････
････････････････････････････････････････････････････････････････
････････････････････････････････････････････････････････････････
･････････････････････････････････
･･
･33
★ST ANDAR D CIRCUIT DIAGRAM ････････････････････････････････
････････････････････････････････････････････････････････････････
････････････････････････････････････････････････
････････････････････････････････
････････････････2- 1
SERVICE MANUAL
COLOUR TELEVISION
BASIC CHASSIS
JKⅡ
ⅡⅡ
Ⅱ

No. 51952
A
V28CT1EKS / AV28CT1EK
B
A
V28CT1EPS / AV28CT1EP
B
A
V28CT1EI
S
11
REPLACEMENT OF MEMORY ICs
1. Memory ICs
This TV use memory ICs. In the memory ICs, there are memorized data
for cor rectly op er atin g th e vid eo an d def lection circu its . W h en r ep lacing
memory ICs, be s ure t o us e ICs writte n with th e initial values of data.
2. Procedure for replacing memory ICs
PROCEDURE
(1) Power off
Sw itch the p ow er of f an d un pl ug th e p ow er cor d f ro m t he ou tlet.
(2) R epla ce ICs.
Be sure to use memory ICs written with the initial data values.
(3) Power on
Pl ug th e p ow er c or d int o th e ou tlet a nd swit ch t he po we r on .
(4) Check and set SY STEM CONSTANT SET :
*
**
* It mus t not adjust wit hout signal.
1) Press th e IN FO RM ATI ON ke y an d th e MUTING key of th e
REMOTE CONTROL UNIT simultaneously.
2) The SERVICE MENU screen of Fig. 1 will be displayed.
3) W hi le th e S ER VIC E ME NU is displ a yed, p ress t he
INFORMATION key and MUTING key s imultaneously, and the
SYSTEM CONSTANT SET screen of Fig. 2 will be displayed.
4) C heck th e se tting va lu es of the S YSTEM CON STA NT SET of
Table 1. If th e value is dif ferent, select the s etting item with the
FUNCTION UP/DOWN key, and s et the c orrect va lue with the
FUNCTION -/+ key.
5) Press the MENU key to memorize the setting value.
6) Press t he INFORMATION ke y t wice, a nd r etu rn t o th e no rmal
screen.
(5) Se tt ing of re cei ve channe ls
Se t th e rec eive ch an ne l.
For setting, ref er to the OPE RATING INSTRUCTIONS.
(6) U ser se tt ings
Check th e us er sett in g values of Tab le 2, an d if sett in g value is
diff er ent , set th e c orrec t valu e.
For setting, ref er to the OPE RATING INSTRUCTIONS.
(7) Setting of SERVICE MENU
Ve rif y the set ting it ems of the SE R VICE M E NU of Tab l e 3, an d rese t
where necessary.
For setting, ref er to the SE RV ICE ADJUSTMENTS.
Na mes of ke y
i
ii
i
▼
▼
▼
▼
INFORMATION
MUT I N G
FUNCTION UP/ DOWN
ME NU
FUNCTION -/+
ke y
OK
NAME OF REMOTE CONTROL KEY
SE RV ICE MENU
1. IF 2. V/C
3. AUDIO 4. DEF
5 . VS M PR ES ET 6 . VP S
7. AUTO PROGRAM (OFF)
1 -7 : SE LE CT : EXI T
Fig.1
SY STE M CON ST ANT S ET
MO DE L= JK _EU R O (V
*.****
)
JVC J K- II EU RO V00
COUNTRY : **
INCH :
**
MO DE L : W T
- + : STORE : EXIT
******** - *****
OK
Fig.2

No. 51952
A
V28CT1EKS / AV28CT1EKB
A
V28CT1EPS / AV28CT1EPB
A
V28CT1EIS
12
SETT ING VALU ES OF SY ST EM CONSTANT SET (TABLE 1)
Setting value
Settin
g
item Setting content
AV 28 CT1 E PS / EP B AV 28 CT1 EIS AV 28 CT1 EKS / EKB
COUNT RY EP IR EK
INCH 28 28 28
MO DE L W T
USER SETTING VALUES (TABLE 2)
PICTURE SE TTING EX T SETTI NG
TINT
CONTRAST
BRIGHT
SHARP
COLOUR
ECO MODE
COOL
NOTHING
ID
S-IN
DUBBING
BLANK
BLANK
EXT-1→EX T-2
PICTURE FEAT URES FEATURES
AUTO VNR
COLO UR S YSTE M
4:3 AU TO ASPE CT
AUTO
TV : Acco rd in g t o p r eset CH
EXT : AUTO
PA NO RA MIC
SL EEP TIME R
BL UE BA CK
CHILD LOCK
DECODER (EXT-2)
OFF
ON
ID : No.****
ALL CH OFF
OFF
SOUND SET TING INSTALL
LA NG UA GE
EDIT/MANUAL
ENGLISH
PRES ET C H on ly
The ot her s : BLA NK
STEREO / Ⅰ･Ⅱ
BA SS
TREBLE
BALANCE
HYPE R S OUND
+8
OFF
DEMO OFF
SERVICE MENU SETTING ITEMS (TABLE 3)
Setting item Setting value Setting item Setting value
1. IF VCO 4. DEF. 1. V- SHIFT
2. V-SIZE
3. SUBTIT LE
4. H-CENT
5. H-S IZE
6. EW - PIN
7. TRAPE Z
8. EW. COR. L
9. EW. COR. H
10. V. S-COR
11 . V- LIN
12. H-BL K-R
13. H-BL K-L
14. V-EHT
15 . H- EHT
16. EHT-GAIN
2. V / C 1. CUT OFF
2. DRI VE
3. BRIGHT
4. CONT.
5. COLO UR
6. HUE
7. BLACK O FFS ET ( Only SE CAM)
8. SHARP
9. PURITY
5. VS M PRESE T
COOL
NORMAL
WARM
1. BRIGHT
2. CONT.
3. COLO UR
4. SHARP
5. HUE
6. R DRIVE
7. B DRIVE
6. VP S
(Do not adju st)
VP S
PDC
1. AUDIO
(Do not adju st)
1. CONC LIMIT
2. A2 ID THR
3. AL C
4. BA SS
5. TREBLE
7. AUTO PR OG RA M
(Do not adju st)
ON / O FF
REFER to VSMPRESET
EK EPIR
WR
WT
CENTER
3224 28

No. 51952
A
V28CT1EKS / AV28CT1EK
B
A
V28CT1EPS / AV28CT1EP
B
A
V28CT1EI
S
13
SERVICE ADJUSTMENTS
BEFORE STARTING SERVICE ADJUSTMENT
1. There ar e 2 w ays of adjusting this TV: One is wi th the
REMOTE CONTROL UNIT and the other is the conventional
method using adjustment parts and components.
2. The setting (adjustment) using the REMOTE CONTROL
UNIT is made on the basis of th e initial setting values. The
se tting va lues whic h a dj ust the sc ree n to t he opt imum
condition can be differ ent fr om the initial setting values.
3. M ake s ure that conn ect ion is c orrect ly ma de t o AC p ower
sou rc e.
4. T urn on th e powe r of th e TV a nd measu r in g i nstrum en t for
war mi n g u p f or at l east 30 m in ut es b ef or e sta rt in g adju stment .
5. If th e r ec eive or inp ut sig nal i s not sp eci fied , use t he m ost
ap pr op ria te s ig na l f or a dj ust me nt.
6. N ever tou ch p ar ts ( such as var iab le r esist or s, tran sform ers an d
condensers) not shown in the adjustment items of this service
adjustment.
7. Prep ar ati o n f or ad j ustm en t ( pres ettin g) :
Unl ess oth er wis e sp eci fied in th e a djust me nt it em s, p r ese t th e
follo win g fu nct io ns with th e REMOTE CO NTROL UNI T:
"Setting p osit ion
PICTURE MODE (VSM) NORMAL
SLEEP TIMER OFF
BALANCE CENTER
ZOOM PANORAMIC
MEASURING INSTRUMENT AND FIXTURES
1. DC voltmeter (or digital voltmeter)
2. Oscilloscope
3. Signal g enerat or (Patt ern g enerat or) [ PAL / SE CA M / NTSC]
4. Remote control unit
ADJUSTMENT ITEMS
●B1 power supply check.
●Adjustment of FOCUS.
●IF circuit a djust ment.
●VS M p r eset ad ju st s etti n g.
●VIDEO / CHROMA circuit adjustment.
●DEFLECTIO N circuit adjustment.
●H. BLAN KING ADJUSTME NT.
●AUDIO circuit adjustment. (Do not adjust)

No. 51952
A
V28CT1EKS / AV28CT1EKB
A
V28CT1EPS / AV28CT1EPB
A
V28CT1EIS
14
ADJUSTMENT LOCATIONS
E1
TP-47R
CN009
CN008
TP-E
CRT SOCKET PWB
(SOLDER SIDE)
TOP
FRON T
MAIN PWB POWER&DEF PWB
FRON T
CN006
AV SEL PWB
TUNER
CN001
IC701
IC702
MEMORY
WDEG
1pi n:B1(TP-91)
2pi n:NC
3pi n:NC
4pi n:NC
5pi n:GN D
5
1
X
FRONT CONTROL PWB
FRON T
HV
SCREEN
FO CUS
TP-47G
TP-47B
CN009
IC301 CN008
CN001 SP R
PW
F90 1
POWER SW
SP L
F

No. 51952
A
V28CT1EKS / AV28CT1EK
B
A
V28CT1EPS / AV28CT1EP
B
A
V28CT1EI
S
15
BASIC OPERATION SERVICE MENU
1. TOOL OF SERVICE MENU OPERATION
Operate the SERVICE MENU with the REMOTE CONTROL UNIT.
2. SE RV ICE MENU ITEMS
W ith the SER VI CE M ENU, var iou s sett in gs ( ad ju stm en ts) c an b e m ade , a nd th ey a re b r oad ly c la ssif ied i n th e f ol lowi ng i te ms of set tings
(adjus tments ):
(1) 1. IF ･･･････ ･････････････ ･･･ This mode adjust s the setting values of the IF circuit.
(2) 2.V /C ･･･････ ･････････････ ･･ This mode adjusts the setting values of the VIDEO / CHRO MA circuit.
(3) 3.AUDIO ･･･････ ････････････ This mode adjusts the setting values of the multiplic ity SOUND circuit.
(4) 4. DEF ･･･････ ･････････････ ･ Thi s m od e adj ust s th e se tting val u es o f th e DE FLEC TION ci rcuit f or eac h as pect m od e g i ve n be lo w.
REGULA R (50/ 60 Hz)
PA NO RA MIC ( 50/ 60 Hz)
14 :9 ZO OM ( 50/ 60 Hz)
16 :9 ZO OM ( 50/ 60 Hz)
SUB TI TLE (50/ 60 Hz)
FULL ( 50/ 60 Hz)
(5) 5.V SM PR ESE T ･･･････ ･･････ This mode adjusts the initial setting values of COOL,NOMAL and WARM.
(VSM : Video Status Memory)
(6) 6.V PS ･･･････ ･････････････ ･ Thi s mod e sh ows th e mo nitor of t he VP S a nd PDC.(Do not adjust).
(VP S : Vi de o Pro gr am Syst em , PDC : Pr ogra m De li ve ry C od e)
(7) 7. AUTO P ROGRAM ･･･････ ･･ By t ur ning th e p ower switch o n, you c an ge t th e st ate of AU TO PROG RA M. (Do not adjust)
3. BASIC OPERATION OF SERVICEMENU
(1) How to enter SERVICE MENU
Press t he INFORMATION key and the MUTING key of the
REMO T E CONTRO L UNI T simu lt an eou sly, an d th e
SERVICE MENU screen of Fig. 1 will be displayed.
(2) Selection of SUB MENU SCREEN
Press one of keys 1～7 of the REMOTE CONTROL UNIT
an d sele ct th e S UB M ENU S C REEN ( See Fi g. 3 ), fo rm th e
SERVICE MENU.
SERVICE MENU →SUB ME NU
1. IF
2. V / C
3. AUDIO
4. DE F.
5. VSM PRE SET
6. VP S
7. AUTO PROGRAM
Names of ke
y
i
ii
i
▼
▼
▼
▼
INFORMATION
MUTI NG
FUNCTION UP/DOWN
MENU
FUNCTION -/+
ke
y
OK
SE RV ICE M ENU
NE ME OF REMOTE CONTOROL KEY
SERVICE MENU
1. IF 2. V/C
3. AUDIO 4. DEF
5 . VS M P RES ET 6 . VP S
7. AUTO P RO GRAM (OFF)
1-7 : SELECT : EXIT
Fi
g
.1
Fig.2

No. 51952
A
V28CT1EKS / AV28CT1EKB
A
V28CT1EPS / AV28CT1EPB
A
V28CT1EIS
16
7. AU TO PRO G RAM
7. AUTO PROGRAM (OFF)
7. AUTO PROGRAM (ON )
COOL
NOR MAL
WARM
1. BR IG HT
2. CONT .
3. COL OU R
4. SHA RP
5. HU E
6. R DR IV E
7. B DR IV E
1. CUT OFF
2. DR IVE
3. BR IG HT
4. CONT .
5. COL OU R
6. HU E
7. BLAC K OFF SET
8. SHARP (Do not adjus t)
9. PURITY (Do not adjust)
1. CONC L I MI T
2. A2 ID THR
3. ALC
4. BA SS
5. TREBLE
1. V-SHIFT
2. V-SIZE
3. SUBTITLE
4. H-C ENT
5. H-SI Z E
6. EW-PIN
7. TRAPEZ
8. EW.COR.L
9. EW.COR.H
10 . V.S-COR
11 . V-L IN
12 . H -BLK-R
13 . H -BLK-L
14. V-EHT(Do notadjust)
15 . H -EHT (Do not ad ju s t)
16 . EH T-G A IN (D o n o t ad ju st)
Fi
g
. 3 SUB MENU SCREEN
SERVICE MENU
SERVIC E MENU
1. IF 2. V/C
3. AUDIO 4. DEF
5. VSM PRESET 6. VPS
7. AUTO PROGRAM (OFF)
1-7 : SELECT : EXIT
5. VSM PRE SET
VSM PRESET
NOR MAL
1. BR IG HT
***
- + : STORE : EXI T
OK
VCO (CW)
**
****
** .
..
.**
****
**
MHz
TOO HI GH
ABOVE REFER ENCE
JUST REFERENCE
BELOW R EFE RENC E
TOO LOW
: EXIT
6. VPS
VPS
VPS = 0000H(- - -)
PD C 8 / 30 / 1 = 0 404 H
: EXIT
V/C
1. CU T OFF (R) ****
(G)
****
(B) ****
- +
: STORE : EXIT
OK
2. V/C
PAL
AU DIO
- +
: STORE : EXIT
OK
3. AU DIO
1. CONC L IMI T 0AH
C AD BI T S = 00 000 00 0
DEF PANORAMIC
**
****
** Hz
1. V-SHIFT
***
( ** )
- +
: STORE : EXIT
OK
SU B MENU 4. D EF
1.IF (VCO)
Do n ot ad just
Do n ot ad just
Do n ot ad just

No. 51952
A
V28CT1EKS / AV28CT1EK
B
A
V28CT1EPS / AV28CT1EP
B
A
V28CT1EI
S
17
(3) Method of Setting
1) M eth od of Set ti ng 1. IF
[VCO]
①1 K ey ･･･････ ･････････････ ･････ Sele ct 1.IF.
②The VCO (CW) screen will be displayed in yellow when the AFC voltage is at a certain level and in blue when it is at other levels.
③INFORMATION K ey ･･･････ ･････ Return t o th e SE RVICE ME NU screen.
2) M eth od of s ett in g 2.V/C, 3.AUDIO, 4.DEF an d 5 .VSM PRESET.
①2～5 K ey･･･････ ･････････････ ･･ Select one from 2.V/C, 3.AUDIO, 4.DEF an d 5 .VSM PRESET.
②FUNCTION UP / DOWN Key ･････ Select s etting items.
③FUNCTION -/+ ･･･････ ･･････････ Set (adjust) the setting values o f the setting it ems.
(Use the number ke ys of the REMOTE CO NTROL UNI T for s etting of WHITE B ALANCE.
For th e s ettin g, ref er to ea ch it em con cerne d.)
④ME NU Key ･･･････ ･････････････ Memorize the setting value.
( Bef or e st or in g t he s ett in g val u es in me mo r y, do no t pr ess t he C H, TV, POW E R O N / OFF key -
if you d o, the values will not be stored in memory.)
⑤INFORMATION Key ･･･････ ･････ Ret urn t o th e SE RVICE ME NU scr ee n.
3) M eth od of s ett in g 6 .VPS and 7. AU T O PR OGR AM .
6.V PS ･･･････ ･････････････ ･･･････ This mode displayed monitor of VPS syst ems. (Do not adjust)
7.AUT O PROGRAM･･･････ ････････ W hen the MAI N POW ER is turne d on wit h the state of AUTO P RO GRAM ON, you ge t a mod e
that initializes every existing set value including language selection. Because this mode is set
at th e fa ctor y u po n co mp leti on of th e a djust m ent , you n eed n ot t o u se i t for servi ce.
(Do not adju st in this mode.)
(4) R ele as e o f SER V IC E M E NU
1) Af ter co mp leting th e se tting , r et ur n t o t he SERVICE ME NU, th en ag ain p r ess th e I NFORM ATIO N ke y.

No. 51952
A
V28CT1EKS / AV28CT1EKB
A
V28CT1EPS / AV28CT1EPB
A
V28CT1EIS
18
ADJUSTMENTS
CHECK IT EM
Item Measuring
instrument
Test point Ad justment part Description
Check of B1
Power Supply
Signal
generator
DC voltm eter
Remote
control unit
TP-91(B1)
TP-E(#
##
#)
[X connector
on POWER
DE F PW B]
1. R eceive a an y br oa dca st.
2. Pu sh t he “ZOOM” ke y an d s el ect the FU LL m ode .
3. Se le ct 2 .V/C f r om the SE RV ICE MEN U.
4. Se le ct 1 . CUT OFF wit h Fu nction UP/ DOW N k ey.
5. Sh ow o ne ho rizon tal lin e wi th the 1 key.
6. Turn t he SCREEN VR, the whole blac k screen d isp lay.
7. C on nect a D C voltm et er t o TP-9 1(B 1) a nd TP-E( #).
8. M ake sure t hat th e volt ag e is D C14 4.5 ±2.0V.
9. R ea djust th e S CRE EN VR t o ap pe ar th e hor izon tal li n e fain tly,
an d ca ncel t he hor izon ta l l in e t o p re ss th e 2 key.
Check of High
Voltage
Signal
generator
DC volunteer
Remote
control unit
CRT anode
Chassis GND
1. R eceive a an y br oa dca st.
2. Pu sh t he “ZOOM” ke y an d s el ect the FU LL m ode .
3. Se le ct 2 .V/C f r om the SE RV ICE MEN U.
4. Sele ct 1 .CUT OFF wit h Function UP/DOWN key.
5. Sh ow o ne h orizo nt al li n e wit h t he 1 k ey.
6. Turn t he SCREEN VR, the whole blac k screen d isp lay.
7. Connect a DC voltmeter to CRT ANODE and chassis GND.
8. M ake sure t hat th e volt ag e is D C 3 0.0 kV .
9. R ea djust t he SC REEN VR t o ap pea r th e h or izon tal lin e fai n tly,
an d c onn ect the h orizo nt al lin e to pr ess 2 key.
ADJUSTMENT OF FOCUS
Item Measuring
instrument
Test point Ad justment part Description
Ad justment of
FOCUS
Signal
gener ator
FOCUS VR
[In FBT]
1. Receive a cross-hatch signal. Select FULL mode.
2. W hi le w atc hi ng th e scr een , a dj ust th e FOCUS VR to m ake th e
vertical and ho rizo nta l l in es as f in e a nd sha rp as possib le.
3. M ake sure th at w hen the sc re en is d arke ned , the l ines r e ma in
in good focus.
+1kV
-1.5kV
SC
REEN VR
F
OCUS
VR

No. 51952
A
V28CT1EKS / AV28CT1EK
B
A
V28CT1EPS / AV28CT1EP
B
A
V28CT1EI
S
19
IF CIRCUIT ADJUSTMENT
Item Measuring
instrument
Test
p
oint Ad justment part Description
Ad justment of
VCO
Remote
control unit
"Und er n orm a l c ond i tions, no ad just me nt is r e quir ed .
1. R eceive an y br o adc ast.
2. Se le ct 1 .IF f ro m t he SERV ICE MENU.
3. C heck th e ch ar act ers co lour of th e JUST REFE RENCE
displayed to yellow.
VSM PR ESET AD JUST SET TIN G
Item Measuring
instrument
Test point Ad justment part Description
Setting of
VS M PRE SET
Remote
control unit
1. BR IG HT
2. CONT.
3. COLOUR
4. SHARP
5. HUE
6. R DRIVE
7. B DRIVE
1. Se le ct 5 .VS M P RESET from th e S ERVICE ME NU.
2. Se le ct COOL w ith t he M ENU key of t he re mo te con tr ol un it.
3. Adju st th e FUNCTION UP /DOW N and -/ + key t o bring t he s et
valu es of 1.B RIG HT ～7.B DRIVE to the va l ues sh ow n in the
table.
4. Press the ME NU key a nd m emor iz e th e s et va lue.
5. Respectively select the VSM PRESET mode for NORMAL and
W ARM, an d make similar a dj ust me nt as i n 3 abo ve.
6. Press the ME NU key a nd m emor iz e th e s et va lue.
∗Refe r to O PERATING INSTRUCTI ONS for the PICTURE
MO DE .
VCO(CW) ***.** MHz
T OO HI GH
ABOVE REF ERENCE
JUST REFEREN CE
BELOW REFERENCE
T OO L O W
: EXIT
YELLOW
fv
VSM preset mode
Setting item COOL NORM AL WAR M
1. BRIGHT
SE TTING VAL UE +0 +0 +0
2. CONT.
SE TTING VAL UE +12 +10 +2
3. COLO UR
SE TTING VAL UE +6 +0 -2
4. SHARP
SE TTING VAL UE +0 +0 -2
5. HUE
SE TTING VAL UE +0 +0 +0
6. R DRIVE
SE TTING VAL UE -20 +0 +16
7. B DRIVE
SE TTING VAL UE +23+0-13
SE TTING VALUE S OF VS M PR ESE T

No. 51952
A
V28CT1EKS / AV28CT1EKB
A
V28CT1EPS / AV28CT1EPB
A
V28CT1EIS
20
Setting item
Colou r sy st em
VIDEO / CHR OMA CIRCUIT ADJUSTMENT
The setting (adjustment) using the REMOTE CONTROL UNIT is made on the basis of the initial setting values.
The setting values which adjust the screen to the optimum condition can be different from the initial setting values.
Initial setting v al ue
Setting Item
(Adjustment Item ) Initial setting v al ue
PAL SE CAM NT SC 3.5 8
NT SC 4.4 3
R -100 5. COLOUR +14 +0 +8
G -100 6. HUE +2
1. CUTOFF
B -100 R-Y +0
R+0
7. BLACK OFFSET
(SECAM) B- Y +0
2. DRIVE
B+0
3. BR IG HT +0
8. SHARP
(Do not adjust)
-7
4. CONT. -10 9. PURITY (Do not adjust) OFF
Item Measuring
instrument Test point Ad justment part Description
Ad ju st ment
of WHITE
BALANCE
(Low Light)
Signal
gener ator
Remote
control unit
1.CUT OFF
(R)＊＊＊
(G)
＊＊＊
(B)＊＊＊
SCREEN VR
[In FBT]
"Set the PICTURE MODE to NORMA L.
1. Receive a black a nd white sign al (colo ur of f).
2. Se le ct 2 .V/C f r om the SE RV ICE MEN U.
3. Select 1.CUT OFF with the FUNCTION UP/DOWN key.
4. Pu sh t he “ZOOM” ke y an d s el ect the “ PA N ORAMIC” m od e.
5. Sh ow o ne ho rizon tal lin e wi th the 1 key.
6. Grad ua lly tu rn the SC REEN VR fr om th e left en d to th e r ight
dir ecti o n to br ing o ne of th e r ed , g r een or blue co lour f ai nt ly
vis ible.
7. Press 4～9 key, a nd br ing ou t th e o the r 2 col o urs a nd ma ke
on e h or izont al l ine visib le i n w hite.
8. T urn th e SC REEN VR a nd bri ng on e wh it e h or izon tal lin e
faintly visible.
9. Press 2 ke y, tu rn of f 1. C UT OFF scr een .
10 . Press the ME NU key a nd m emor iz e th e s et va lue.
R
e
m
ote
Co
n
t
r
o
l
U
ni
t
H. LIN E ON
1 2 3
456
789
R CU TOF F
R CU TOF F
H. LIN E OF F
G CUTOFF
G CUTOFF
B CUTOFF
B CUTOFF

No. 51952
A
V28CT1EKS / AV28CT1EK
B
A
V28CT1EPS / AV28CT1EP
B
A
V28CT1EI
S
21
Item Measuring
instrument Test point Ad justment part Description
Ad ju st ment
of WHITE
BALANCE
(High Light)
Signal
gener ator
Remote
control unit
2. DRIV E
(R)＊＊＊
(B)＊＊＊
"The a dj ust me nt f or Lo w Ligh t W HITE BA LAN CE sh ou l d b e
fi nish ed.
"Set the PICTURE MODE to NORMA L.
1. Receive a black a nd white sign al (colo ur of f).
2. Se le ct 2 .V/C f r om the SE RV ICE MEN U.
3. Se le ct 2 .DRI VE with th e FUNCTI ON UP/DOWN key.
4. C ha nge th e sc re en col o ur to w hite wit h 4 key o r 7 ke y (Dr ive of
Red) , 6 ke y or 9 key (Dr ive of Blu e) .
5. Press the MENU key, and memorize the set values.
Ad ju st ment
of
SUB BRIGHT
Remote
control unit
3. BRIG HT 1. R eceive an y br o adc ast.
2. Se le ct 2 .V/C f r om the SE RV ICE MEN U.
3. Sele ct 3.BRIGHT with the FUNCTION UP/DOWN key.
4. Set the initial setting value with the FUNCTION -/+ key.
5. If th e b righ tn ess is no t th e be st w ith th e in i ti al se tting va l ue ,
make fine adjustment until you get the best brightness.
6. Press the ME NU key a nd m emor iz e th e s et va lue.
Ad ju st ment
of
SUB
CONTRAST
Remote
control unit
4.CO NT. 1. R eceive an y br o adc ast.
2. Se le ct 2 .V/C f r om the SE RV ICE MEN U.
3. Select 4.CONT with the FUNCTION UP/DOWN key.
4. Set the initial setting value with the FUNCTION -/+ key.
5. If the con trast is n ot th e be st w ith the i niti al se tti ng va lu e, ma ke
fineadjustment until you get the best contrast.
6. Press the ME NU key a nd m emor iz e th e s et va lue.
REMOTE CONTROL UNIT
123
4 5
7 8
6
9
▼
▲
▼
▲
DRIVE (R)
DRIVE
(
R
)
DRIVE (B)
DRIVE
(
B
)

No. 51952
A
V28CT1EKS / AV28CT1EKB
A
V28CT1EPS / AV28CT1EPB
A
V28CT1EIS
22
Item Measuring
instrument Test point Ad justment part Description
5.COLO UR
(PAL～
～～
～NT SC )
[Method of adjustment without m easuring instrument]
PAL COLOUR (PAL COLOUR)
1. R eceive PA L b road cast.
2. Se le ct 2 .V/C f r om the SE RV ICE MEN U.
3. Sele ct 5.COLOUR with the FUNCTION UP /DOWN key.
4. Set th e init ial sett ing value for P AL COLOUR with the
FUNCTION - or + k ey.
5. If t he co lour i s no t the bes t wi th th e in itial set va lu e, m ake
fineadjustment until you get the best colour.
6. Press the ME NU key a nd m emor iz e th e s et va lue.
SE CA M C OLO UR
Only
AV2 8CT1E PS
AV2 8CT1E PB
(SECAMCOLOUR)
1. R ecei ve a SE CA M broa dcas t.
2. M ake fin e a dj ustm e nt of SE CAM C OLO UR i n the s am e
m ann er as fo r abo ve.
(NTSC 3.58 COLOUR)
1. Inp ut a NTSC 3. 58 MHz COMPOSITE V IDEO sig na l f rom the
EXT t erm in al.
2. M ake simil ar f in e ad ju stm en t of NTSC 3 .58 COLO UR i n th e
same m ann er as f or a bo ve .
Ad ju st ment
of SUB
COLOURⅠ
ⅠⅠ
Ⅰ
Remote
control unit
NTSC COLOUR
(NTSC 4.43 COLOUR)
1. When NTSC 3.58 is set, NTSC 4.43 will be automatically set at
the respective values.

No. 51952
A
V28CT1EKS / AV28CT1EK
B
A
V28CT1EPS / AV28CT1EP
B
A
V28CT1EI
S
23
Item Measuring
instrument Test point Ad justment part Description
5.COLO UR
(PAL～
～～
～NT SC )
[Method of adjustment using measuring instrument]
PAL COLOUR (PAL COLOUR)
1. R eceive a PAL fu ll f i eld co l our b ar sign al ( 75% white ).
2. Se le ct 2 .V/C f r om the SE RV ICE MEN U.
3. Se le ct 5.COLO UR with th e FUNCTI ON UP/DOWN key.
4. Se t th e i n it ial se tting val u e of P AL C OLO UR with t he
FUNCTION - or + k ey.
5. C on nect th e osc ill osc ope be twee n TP -4 7B an d T P-E(#).
6. Ad ju st P AL COL OU R an d b rin g th e va l ue of ( A) i n th e
illustration to +6V.
7. Press the ME NU key a nd m emor iz e th e s etti n g va lu e.
SE CA M C OLO UR
Only
AV2 8CT1E PS
AV2 8CT1E PB
(SECAMCOLOUR)
1. R eceive a SE CA M f ull fie ld co lour b ar si gn al(75 % w hite).
2. Set the initial setting value of SECAM COLOUR with the
FUNCTION -/+ key.
3. Ad ju st SE CAM COLO UR an d brin g t he va lue of ( A ) in t he
illustration to –5V.
4. Press the ME NU key a nd m emor iz e th e s etti n g va lu e.
(NTSC 3.58 COLOUR)
1. Inp ut a NTSC 3.5 8 MH z COMPOSI T E V IDE O si gn al ( ful l fie ld
colour bar with 75% whit e) from the EX T terminal.
2. Se t th e ini tial s etting va lue of N TSC 3. 58 C OLO UR wi th t he
FUNCTION -/+ key.
3. Ad ju st NTSC 3.5 8 C OL OU R a nd b r in g th e val u e of (A) in the
illu str ati on to 0V ( Vo lt ag e d if feren ce bet w een wh ite(W ) an d
blu e(B ) .
4. Press the ME NU key a nd m emor iz e th e s etti n g va lu e.
Ad ju st ment
of SUB
COLOUR Ⅱ
ⅡⅡ
Ⅱ
Signal
gener ator
Os cill oscope
Remote
control unit
TP-47B
TP-E(#
##
#)
[CRT
SOCKET
PWB ]
NTSC COLOUR
(NTSC 4.43 COLOUR)
1. When NTSC 3.58 is set, NTSC 4.43 will be automatically set at
the respective values.
(
+
)
(
-
)
0
WC
y
M
g
B
(
A
)
VOLTAGE (W-B)
+6V
VOLTAGE (W-B)
-5V

No. 51952
A
V28CT1EKS / AV28CT1EKB
A
V28CT1EPS / AV28CT1EPB
A
V28CT1EIS
24
Item Measuring
instrument Test point Ad justment part Description
6. HUE [Method of adjustment without m easuring instrument]
NTSC 3.58 HUE [NTSC 3.58 HUE]
1. Inp ut a NTSC 3.5 8 MH z COMPOSI T E V IDE O si gn al (f ul l fie ld
colour bar with 75% whit e) from the EX T terminal.
2. Se le ct 2.V / C from t he SERVI CE ME NU.
3. Select 6. HUE with the FUNCTION UP/DOW N key.
4. Se t the i niti a l sett in g va l ue of N TSC 3. 58 HUE wi th th e
FUNCTION -/+ key.
5. If you cannot get the best hue with the initial setting value,
make fine adjustment until you get the best hue.
6. Press the ME NU key a nd m emor iz e th e s et va lue.
Ad ju st ment
of
SUB HUEⅠ
ⅠⅠ
Ⅰ
Remote
control unit
NTSC 4.43 HUE [NTSC 4.43 HUE]
1. When NTSC 3.58 is set, NTSC 4.43 will be automatically set at
the respective values.
6. HUE [Method of adjustment using measuring instrument]
NTSC 3.58 HUE [NTSC 3.58 HUE]
1. Inp ut a NTSC 3.5 8 MH z COMPOSI T E V IDE O si gn al (f ul l fie ld
colour bar with 75% whit e) from the EX T terminal.
2. Se le ct 2 .V/C f r om the SE RV ICE MEN U.
3. Select 6. HUE with the FUNCTION UP/DOW N key.
4. Se t the i niti a l sett in g va l ue of N TSC 3. 58 HUE wi th th e
FUNCTION - or + k ey.
5. C on nect th e osc ill osc ope be twee n TP -4 7B an d T P-E(#)
6. Ad ju st NT SC 3. 58 H UE t o bri ng th e valu e of (B) in the
illu str ati on t o - 4 V ( voltag e diff er enc e b et we en wh it e ( W ) an d
m ag ent a ( Mg ) ).
7. Press the MENU key and memoriz e the s etting value
Ad ju st ment
of
SUB HUEⅡ
ⅡⅡ
Ⅱ
Signal
gener ator
Os cill oscope
Remote
control unit
TP-47B
TP-E(#
##
#)
[CRT
SOCKET
PWB]
NTSC 4.43 HUE [NTSC 4.43 HUE]
1. W hen NTSC 3 .58 is set, N TSC 4 .43 w ill b e aut om atica lly se t at
the respective values.
0
W
Cy
M
g
B
(
B
)
(
-
)
(
+
)

No. 51952
A
V28CT1EKS / AV28CT1EK
B
A
V28CT1EPS / AV28CT1EP
B
A
V28CT1EI
S
25
[Only AV28CT1EPS / AV28CT1EPB]
Item Measuring
instrument Test point Ad justment part Description
[Method of adjustment without m easuring instrument]Ad ju st ment
of BLACK
OFFSET
(SECAM)Ⅰ
ⅠⅠ
Ⅰ
Remote
control unit
7. BL AC K
OFFSET
(R-Y) ***
(B-Y) ***
1. Receive a SECAM b r oadc ast.
2. Se le ct 2.V/C f rom SERVICE MENU.
3. Se le ct 7 . B LACK O FFS ET with th e FUNCTIO N U P/DOW N
key.
4. Se t the i n it ial se tti ng valu e f or BLA CK OFFSET (R-Y) an d ( B-
Y) wit h 4and 7or 6and 9ke ys of th e r emot e c ontro l.
5. If the pictur e is not th e b est wit h the in it ial set ting va lue, mak e
fi n e ad justmen t un ti l yo u g et t he be st p ict ur e.
6. Press the ME NU key a nd m emor ize t he sett in g va lue.
[Method of adjustment using measuring instrument]Ad ju st ment
of BLACK
OFFSET
(SECAM)Ⅱ
ⅡⅡ
Ⅱ
Signal
gener ator
Os cill oscope
Remote
control unit
35 PI N (R-Y )
36 PI N (B-Y )
IC-301 ON
MAIN PWB
7. BL AC K
OFFSET
(R-Y) ***
(B-Y) ***
1. R ecei ve a SECAM COL OU R ba r sign al (f ul l field co lour b ar
75% white).
2. Sele ct 2.V /C from SERVICE ME NU.
3. Sele ct 7.BLACK OFFSET with the FUNCTION UP /DOWN
key.
4. C on nect th e oscillosc op e b et we en 35 p i n of I C-3 01 an d T P-E
(#).
5. By using 4and 7keys of the remot e control, adjust the
BLACK OFFSET (R-Y) so that it becomes the waveform
ch ang es f ro m ( a ) t o ( b) sh own i n th e f i gure.
6. C on nect th e osc illosc ope be tw een 36 pi n of I C- 3 01 an d TP- E.
7. By using
6and 9keys of the remot e control, adjust the
BLACK OFFSET (B-Y) so that it becomes the waveform
ch ang es f ro m ( c) to ( d) sh own in th e fi gu re.
8. If the pictu re i s n ot th e best wit h th e adju sted pictu re , make
fineadjustment until you get the best picture.
9. Pr ess the ME NU key a nd m emor iz e th e s ettin g va lu e.
[R-Y]
(a) (b)
[B-Y]
(
c
)
(
d
)
REMOTE CONTROL UNIT
1 2 3
45
78
6
9
BLACK OFFSET ON
▼
▲
▼
▲
R-Y
R-Y
B- Y
B- Y
BLACK OFFSET
OFF

No. 51952
A
V28CT1EKS / AV28CT1EKB
A
V28CT1EPS / AV28CT1EPB
A
V28CT1EIS
26
DEFLECTION CIRCUIT ADJUSTMENT
There are 7 modes of the adjus tment.
( 1 ) 50Hz mode ( ①
①①
①PANORAMIC ②
②②
②FULL ③
③③
③REGULAR ④
④④
④14:9 ZOOM ⑤
⑤⑤
⑤16:9 ZOOM ⑥
⑥⑥
⑥16:9 ZOOM SUB TITLE )
( 2 ) 6 0Hz mode ( ea ch as pec t mode ) ････ ･
････ ･････ ･
････ ･ Depending upon the kind of signals ( vertical frequency 50Hz / 60Hz ).
"The adjustment using the remote control unit is made on the basis of th e initial setting values.
"When the 50Hz PANORAMIC mode has been established, the setting of oth er modes will be done automatically.
However, if the picture quality has not been optimized, adjust each mode again, respectively.
"The setting values which adjust the screen to the optimum condition can be different from the initial setting values.
Ini tial setti ng val ue ( 1/2)
Initial setting v al ue
PANORAMIC 14:9 ZOOM 16:9 ZOOM 16:9 ZOOM
SUB TITLE
Setting item Ad justment nam e
50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz
1.V-SHIFTVerticalcenter -10-1 +0+0+1+0+0+0
2. V-SIZE Ve rt ic al he ight +8 -2 + 18 + 15 + 38 + 37 +42 + 40
3. SUBTITL E SUBTIT LE B OTTOM Vertical Line arity -8 +0 +0 +0 +0 +0 +15 +15
4. H-CENT Horizontal center -9 +5 +1 +1 +0 +0 +0 +0
5. H-S IZE Horizont al width +10 +0 -12 -14 -6 -6 -6 -6
6. EW-PIN Side pin correction -23 +0 -1 -1 -1 -1 -2 -1
7. TRA PEZ Trap ezoida l disto rt ion c orrec tion +2 + 0 - 1 + 0 - 1 + 0 +0 +0
8. EW.COR.L CORNER PIN correction Low side +0 +0 +0 +0 +0 +0 +0 +0
9. EW.COR.H CORNER PIN correction High side +0 +0 +0 +0 +0 +0 +0 +0
10.V.S-CORVerticalheightcorrection +4+0+0+0+0+0+4+0
11.V-LIN VerticalLinearity -1 +0+0+0+1+0+0+0
12.H-BLK-R BLANKING POSITION of Right side +0 +0 +123 +124 +0 +0 +0 +0
13.H-BLK-L BLANKING POSITION of Left side +0 +0 +36 +27 +0 +0 +0 +0
14 .V-EH T
( Do no t adjust ) V size correction level caused b
y
EHT chan
g
e-4 +0+0+0+0+0+0+0
15 .H -E HT
( Do no t adjust ) H size correction levelcaused by EHT change -3 +0 +0 +0 +0 +0 +0 +0
16 .EHT- GAIN
( Do no t adjust ) Size correction gain caused by EHT change +0 +0 +0 +0 +0 +0 +0 +0
Ini tial setti ng val ue ( 2/2)
Initial setting v al ue
FULL REGULAR
Setting item Ad justment nam e
50 Hz 60 Hz 50 Hz 60 Hz
1. V-SHIFT Vertical center +0 +0 +0 +0
2. V-SIZE Ve rt ic al he ig ht - 6 - 6 - 3 - 3
3. SUBTITL E SUBTIT LE B OTTOM Vertical Line arity +0 +0 +0 +0
4. H-CENT Hor izont al ce nter +0 +0 +1 +1
5. H-S IZE Hor izont al width -6 - 6 - 21 -21
6.EW-PINSidepincorrection +0+0+0+0
7. T RA PEZ Tr ap ezoida l disto rt ion c orr ec tion + 0 + 0 - 1 + 0
8. EW.COR.L C ORNE R PIN co rrect ion Lo w s id e + 0 + 0 + 0 + 0
9. EW.COR.H CORNE R PIN correct ion Hig h side +0 + 0 + 0 + 0
10 .V.S -COR Ve rt ic al he ig ht c or rection + 0 + 0 + 0 + 0
11 .V-LI N Ve rt ic al Lin ear ity + 0 + 0 + 0 + 0
12 .H -B LK -R BL ANKING P OSITI ON of Rig ht s id e + 0 + 0 +123 + 124
13 .H -B LK -L BL AN KIN G P OSITI ON of Lef t si d e + 0 + 0 + 36 +27
14 .V-EH T
( Do no t adjust ) Vsize correction level caused by EHT change +0 +0 +0 +0
15 .H -E HT
( Do no t adjust ) Hsiz e cor r ect io n leve l c aus ed b
y
EHT chan
g
e+0+0+0+0
16 .EHT- GAIN
( Do no t adjust ) Si ze c or re ction ga i n ca use d b y EH T ch an ge +0 + 0 + 0 + 0

No. 51952
A
V28CT1EPS / AV28CT1EP
B
A
V28CT1EKS / AV28CT1EK
B
A
V28CT1EI
S
27
Item Measuring
instrument Test point Ad justment part Description
Ad ju st ment
of
V-SHIFT
Signal
gener ator
Remote
control unit
1. V- S HI FT [50Hz PANORA MIC mode]
1. R eceive a cir cle p att ern sig na l of ve rt ic al fr eq ue ncy 5 0H z.
2. Se le ct 4 .DEF f rom t he SER VI CE M ENU.
3. Sele ct 1.V-SHIFT with t he FUNCTION UP/DOW N key.
4. Adjust V-SHI FT to make A = B.
5. Press the ME NU key a nd m emor iz e th e s et va lue.
*
**
* For JK c hass is
Set all data exc ept for "PANORAMIC" to " 0".
Ad ju st V.CE NTE R of o the r asp ects with "P ANOR AMIC" mode
whi le also ta kin g the ir p osi t io ns i n to consid er at i on. If yo u wa nt
to obt ai n h or iz ont al lines wi th l ess no is e o n th e scr ee n, ad ju st
V.LIN inst ead of "PANORA MIC" mode.
Ad ju st ment
of V-SIZE &
SUBTITLE
2 .V-SI ZE
3.SUBTITLE
6. R eceive a cr oss -h atc h si gn al.
7. Select 2.V-SIZE and set the initial setting value.
8. Adjust V-SIZE and make sure that the vertical screen size of the
pictu re size is in th e b el low t able.
9. Press the ME NU key a nd m emor iz e th e s et va lue.
10 . W hen ad j ust th e [S UB T ITLE ], se l ect “ 3 .SU BTIT L E” an d ad ju st
to un der p ar t o f p ict ur e s ize .
11 . Inp ut a N TSC V IDE O sig na l ( 60Hz) f r om th e E XT t er min al, and
make sure t hat th e vert ic al screen size is in the t able be low.
12 . Press th e MENU ke y an d m emor ize t he set va l ue.
AS PE CT
MODE PANORAMIC 14 : 9 Z OOM 16 : 9 Z OOM 16 : 9 Z OOM SUB TITLE FULL REGULAR
SCREEN
TOP 87 % 80 % 70 % 70 % 92 % 92 %
SCREEN
BOTTOM 87 % 80 % 70 % 83 % 92 % 92 %
[ SCREEN S IZE ]
Screen size
Picture size 100%
Picture
size
10 0%
Screen
size
A
B

No. 51952
A
V28CT1EPS / AV28CT1EPB
A
V28CT1EKS / AV28CT1EKB
A
V28CT1EIS
28
Item Measuring
instrument Test point Ad justment part Description
Ad justment of
HORIZONTAL
CENTER
4.H-CENT. 13 . Recei ve a c ir cle p at tern s ig na l.
14. Select 4.H-CENT and set the initialsetting value.
15 . Ad ju st H- CE NT to ma ke C =D .
16 . Pr ess the ME NU key a nd m emor iz e th e s et va lue.
Ad ju st ment
of
HORIZONTAL
SIZ E
5. H-SIZ E 17. Receive a circlepattern signal.
18. Select 5.H-SIZE and set the initial setting value.
19 . Ad ju st H -SIZE an d make sur e th at t he ho rizo nta l sc re en si ze
of th e p ict ur e si ze is in th e b ell ow t abl e .
20 . Pr ess the ME NU key a nd m emor iz e th e s et va lue.
*The nu m eric of t he RE GU LA R an d 1 4:9 ZOO M m o des ar e
sh own the leng th o f th e 90 % ho rizo nta l si ze p osi tion ( L) as
sh own in th e figu r e a bov e.
21. Input a NTSC VI DE O sign al ( 60Hz) f rom the EX T terminal,
an d ma ke sure tha t the h ori zo nt al scr e en size of th e eac h
ASPECT mode is in the below table.
22 . Pr ess the ME NU key a nd m emor iz e th e s et va lue.
Ad justment of
EW-PIN
6.E W- PI N 23. Sele ct 6.EW-PIN and s et t he initial s etting value
24 . Ad ju st EW - PIN a nd ma ke t he 2 nd .ve rt ic al lin es a t th e l ef t and
r ig ht ed ges o f th e scree n strai g ht. Also m ak e sur e t hat the 3r d
vertical lines are straight.
25 . Pr ess the ME NU key a nd m emor iz e th e s et va lue.
AS PE CT
MODE PANORAMIC 14:9 ZOOM 16:9 ZOOM 16:9 ZOOM SUB TITLE FULL REGULAR
PA L= 95 %
H SIZ E NTSC=94% L= 49 5mm 92 % 92 % 92 % L= 44 0mm
[ SCREEN S IZE ]
CD
L
90 %
90 %
Straig ht

No. 51952
A
V28CT1EPS / AV28CT1EP
B
A
V28CT1EKS / AV28CT1EK
B
A
V28CT1EI
S
29
Item Measuring
instrument Test point Ad justment part Description
Ad ju st ment
of TRAPEZ
Signal
gener ator
Remote
control unit
7. TRAPEZ 26 . R ecei ve a cr oss-h atch signa l.
27. Select 7.TRAPEZ with the FUNCTION UP/DOWN key.
28. Set the initial setting value of TRAPEZ with the FUNCTION
- or + key.
29 . Ad ju st TR APE Z an d b r in g t he VER TIC AL li nes at the r ig ht
an d l ef t edg es o f th e scr e en pa ra ll e l .
30 . Pr ess the ME NU key a nd m emor iz e th e s et va lue.
Ad justment of
EW. CORNER
L/H
Signal
gener ator
Remote
control unit
8.EW. COR. L
9.EW. COR. H
31. Select 8.EW. COR. L with the FUNCTION UP / DOW N key.
32. Set th e init ial setting value of EW. COR. L with th e
FUNCTION – or + key.
33 . Ad ju st EW . COR. L, an d b ri n g t he str aigh t l ine at the l ow
corner.
34. Select 9.EW. COR. H with the FUNCTION UP / DOWN key.
35. Set the initial setting value of EW. COR. H with the
FUNCTION – or + key.
36 . Ad ju st EW . COR. H, an d br ing the strai gh t l in e a t th e u pp er
corner.
37 . Pr ess the ME NU key a nd m emor iz e th e s et va lue.
Ad ju st ment
Of
VERTICAL-S
CORRECTION
&
VERTICAL
LINEARITY
10. V- S.CR
11 . V- L IN
•When the v ertical linearity has been deteriorated remarkably,
perform the following step s.
38 . Recei ve a cr oss-h atch si gna l.
39. Select 1 1.V-LIN with the FUNCTIO N UP / DOWN key.
40. Set the initial setting value of 11.V-LIN with the FUNCTION
- / + key.
41. Select 1 0.V -S. COR with th e FUNCTION UP / DOWN ke y.
42 . Se t th e ini ti a l sett in g va l ue o f 1 0.V-S. COR with the
FUNCTION
- / + key.
43. Adjust 1 1.V-LIN and 10.V-S.COR s o t hat t he sp aces of e ach
lin e on TOP, CENTER and BOTTOM be com e unif orm.
NOTE : Do n ot ad
j
ust “PA NO RA MI C” & “1 6 : 9 ZOOM SUBTIT LE”
mode.
*
**
* For JK c has sis
On account of CRT (ITC), set V-S.COR except for
"PANORAMIC" mode t o the minimum.
W hen ad ju sting "PA NO R AMIC" mo de , sli gh tl y exp an d th e
sp ace at th e CENTER while t aking t he circular ity at the
CENTER into consideration.
Paralle l
Straig ht Stra ight
TOP
CENTER
BOT TOM