K40 RL360di User manual

EXPERT OWNER’S
MANUAL

K40 Consult
Don’t l ke to read manuals?
Call our exper enced K40 Consultants.
We’ll expla n the whole th ng.
800.323.5608
K40 ELECTRONICS
600 Tollgate Rd., Su te A
Elg n, IL 60123
K40.com

3
ake-Up Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Receiving Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6
Radar Alert Sequence . . . . . . . . . . . . . . . . . . . . . . . . . .5
aser Alert Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . .5
aser Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Non-Police Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
K-Band Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Traffic Sensor Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Special Features / Functions . . . . . . . . . . . . . . . . . . . . . . . .7-13
Dim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Sensitivity (SENS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Quiet Ride (QR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Mute Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Mark to Mute (MM) . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Mark to Alert (MA) . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Speed Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-11
Customizable Settings . . . . . . . . . . . . . . . . . . . . .11-13
Control Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
arranty / Guarantees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Table of Contents

Your K40 system will be ready for use following this automatic wake-up
sequence:
1. Start your vehi le – Your K40 system is designed to turn on
automatically every time your vehicle is started.
2. Listen for Wake-Up Sequen e – Both front and rear alert lights
in your dash will flash (front only radar receiver systems have one
alert light). The voice will announce, “K40 Scan, Active,” then you
will hear alerts for all bands.
NOTE: If you don’t hear the wake-up sequence, press and release .
3. GPS Conne tion – After locating available satellites, the unit will
announce, “GPS Connected.”
NOTE: If you are in a location that prevents connection with GPS
satellites (e.g. parking garage), your system will still protect you from
all radar / laser threats. Once you drive to an unobstructed location,
the GPS will connect and you will hear, “GPS Connected.”
4
Wake-Up Sequen e
(using factory default settings)

5
Your K40 system provides a combination of audio and visual alerts
to warn you when radar is detected.
Radar Alert Sequence
Your K40 system detects all North American police radar bands (X,
K, and Ka-Band). When a signal is detected:
•A voice alerts which band was identified. (This assumes the factory
default “Voice On” setting has not been changed.)
•The K40 R 360di Expert will announce the direction of the signal’s
source, either front or rear, along with the band detected. K40
R 200di Expert systems will only announce the band detected.
•Signal strength and proximity to the radar source will be identified
as a series of Geiger counter-like tones. The faster the tone pattern,
the closer you are to the source. Each band has its own distinctive
tone.
Laser Alert Sequence
(only for K40 systems that include one or more Laser Defusers®)
When your K40 system detects a laser signal:
•A voice announces, “ aser.” (This assumes the factory default
“Voice On” setting has not been changed.)
•You will then hear a distinct and urgent audio tone.
•ED(s) will pulse rapidly.
Re eiving Alerts

6
Laser Settings
The aser Defuser can be configured to one of three different
operational settings:
Alerts from Non-Police Signals
Your K40 system is sensitive enough to detect signals generated by
non-police equipment, such as automatic doors. To learn how to
minimize these signals, please read about SENSITIVITY options (page
7), Quiet Ride function (page 8), and Mark to Mute (page 9).
K-Band Filter
Your K40 system rejects alerts from vehicles on the road (including
your own) equipped with radar-based safety features, such as colli-
sion avoidance. Police radar reception and detection range is
unaffected by this feature.
Traffic Sensor Filter
Your K40 system will reject alerts from traffic flow sensors usually
encountered during highway driving. Enable this filter through the
menu (pages 11-13).
Constant Upon receiving a laser signal, the
T ansmit Laser Defuser will continuously trans-
mit a jamming signal for the duration
of the laser encounter. This is the
factory default setting.
Pulse T ansmit Upon receiving a laser signal, the
Laser Defuser will transmit a jamming
signal for 5 seconds and then cease
firing for the duration of that encounter.
Receive Only The Laser Defuser will only detect laser.
o jamming signal will be emitted.
•Gives the driver more time to decelerate.
•Higher potential for jamming all the
way to the laser gun location.
•Gives you time to reduce speed. Officer
will then be able to obtain speed to
eliminate the suspicion of “jamming”.
•For notification only. Officer will immedi-
ately obtain a speed reading on your
vehicle in this setting.
Laser Settings Des ription Re ommended Use

7
DIM
• Press and release to adjust ED brightness to accommodate
various driving environments. Your setting will automatically be
saved with the exception of “Off.” The “Off” setting will revert to
“Night” upon system wake-up.
The 5 options include:
1. “Day” (Bright)
2. “Dusk” (Medium / factory default)
3. “Night”(Dim)
4. “Auto” (LED(s) ad ust automatically from 3 seconds in “Day,” 3 seconds
in “Dusk,” and the duration of the alert in “Night”)
5. “Off” (No light(s), still receive full audio alerts)
SENSITIVIT
• Press and release to change the setting at any time.Your
K40 system offers three levels of radar sensitivity settings to accom-
modate various driving situations.
Settings Sensitivity Re ommended Use
1. Highway Detects all orth American For highway travel or in any
(factory default police radar signals at full area in which you are unfam-
sensitivity. iliar with the types of radar
used.
2. City 50% reduction in X-Band sen- When traveling in an urban
sitivity. area with minimal non-police
radar signals.
3. Filte X-Band off. 50% reduction in When traveling in a congested
K and Ka-Band sensitivity. traffic area with a high con-
centration of non-police
radar signals.
setting)
Spe ial Features / Fun tions

8
Quiet Ride
The Quiet Ride function will automatically silence all radar / laser
alerts when traveling under a speed setting of your choice between
5 - 75 mph in 5 mph increments or 10 - 120 kph in 10 kph increments.
Visual alerts are unaffected by Quiet Ride settings.
The factory default setting for Quiet Ride is “Off.”
Activating / Adjusting Quiet Ride
• Press and release to activate the Quiet Ride menu. Voice
will announce the current setting e.g., “Quiet Ride Off,” or the cur-
rent speed setting,“Quiet Ride, 25, 30, 35...”
•Use the or to adjust the speed settings on Quiet Ride. Any
selected speed setting indicates Quiet Ride is on.
•When you have made your desired Quiet Ride speed selections, stop
scrolling and voice will announce, “Quiet Ride Set.”
NOTE: ocations that you have “Marked to Alert” (page 10) are un-
affected by Quiet Ride settings.
Mute Functions
• Press and release for 30 second mute (or duration of alert).
•Press and hold for 3 seconds to engage extended mute
(5 minutes or duration of alert).
To turn the voi e / tone audio alerts off:
• Press and release until voice confirms, “Volume Off.”
In both Mute settings and Volume Off settings, you will continue to
receive flashing visual alerts.

9
Mark to Mute
The Mark to Mute function allows you to mute any radar band / laser
alert from a non-police source (i.e. an automatic door) in a specific
GPS location.
Using Mark to Mute
•Press and release to mute a specific radar band /
laser alert.*
•A voice announces that a specific radar band / laser alert has been
muted (i.e. “K Muted”).
•You will no longer receive audible alerts for the muted radar band /
laser alert when within a 1,500 ft. radius of the muted location.
•You will still receive visual alerts from the alert ED(s).
•All other radar bands / laser alerts remain unaffected.
To remove a previously muted radar band / laser alert from
your database:
•Press and release while in the marked location.
•Voice announces that a specific radar band / laser alert has been
removed (i.e. “K Muted Removed”).
To remove all stored muted radar bands / laser alerts:
•Press and hold for 10 seconds at any time.
•Voice announces, “All Muted ocations Cleared.”
*A radar or laser signal must be present in order to mark a location for mute.

10
Mark to Alert
The Mark to Alert function allows you to add specific GPS locations
to your personal database, alerting you to any point of interest you
choose (such as school zones, speed traps, or red light cameras).
•Press and release when you want to mark a location for alert.
•Voice will announce, “Marked to Alert.”
In the future, you will be alerted as follows:
When you arrive… You will hear…
…within a radius of 750 feet ...“Approaching marked location”
of a marked location and the alert light(s) will flash twice
...at a marked location ...a single “Bing” tone and the alert
light(s) will flash once
To remove a previously marked lo ation from your database:
•Press and release while in the marked location.
•Voice announces, “Marked ocation Removed.”
To remove all stored lo ations:
•Press and hold for 10 seconds at any time.
•Voice announces, “All Alert ocations Cleared.”
Speed Monitor
The Speed Monitor function alerts the driver when a preselected
speed is exceeded. Speed Monitor can be set to any speed between
40 - 100 mph in 5 mph increments or 60 - 160 kph in 10 kph increments.
The factory default setting for Speed Monitor is “Off.”

11
Activating / Adjusting Speed Monitor
•Press and release until voice announces, “Speed Monitor.”
•Use or to adjust the Speed Monitor speed setting. When you
have chosen your desired Speed Monitor setting, stop scrolling and
voice will announce, “Exit.”
When driving and the Speed Monitor speed is exceeded:
•Your K40 system will emit a continuous “Bing Bong” tone and the
ED(s) will remain lit.
•The alerts will continue until the vehicle’s speed is reduced to
below the Speed Monitor speed setting.
Customizable Settings
To change the factory preset features and optimize your K40
system for the way you drive, follow the instructions below, or call
a K40 Consultant at 800.323.5608. Rest assured your call will be
answered immediately and personally.
To change settings:
•Press and release to enter Menu Mode.
The voice will announce, “Menu,” and then announce the first
customizable option and its current status.
•Press and release to scroll through the options until you
get to the feature you want to change.
•Press and release or to change an existing setting.
To save your settings and exit:
•Press and hold for 3 seconds, or wait 10 seconds and the
system will automatically save your preferences.
•The voice will announce,“Exit.”
(see the following page for a list of Customizable Settings)

12
Customizable Settings
1 Voice Type “Female Voice” “Female Voice” Choose male or female voice for
audio alerts.
2 Audible Voice ”Voice On“ “Voice On” For all initial audio alerts: “Voice
On” uses voice; “Voice Off”
uses tones only.
3 Wake-Up “Wake-Up Long”“Wake-Up Long” Controls length of startup se-
quence after powering on unit.
“Wake-Up Long” is standard five
second sequence. “Wake-Up Short”
uses an abbreviated sequence.
4 Auto Mute “Auto Mute Off”“Auto Mute Off” Automatically reduces volume
after five seconds.
5 Traffic Sensor “Traffic Sensor “Traffic Sensor Enables filtration of K-Band
Filter Filter Off” Filter Off” radar signals from traffic flow
sensors.
6 mph / kph “mph” “mph” Choose mph or kph.
7 Speed Monitor “Speed Monitor “Speed Monitor Alerts the driver when a pre-
Off” Off” selected speed is exceeded.
8 Front Radar “Radar On” “Front Radar On” Allows user to turn off front
radar (important when traveling
in states or countries where
radar detectors are illegal).
9 Front X-Band “X-Band On” “Front X-Band On” Enables the detection of X-Band
radar from front receiver.
“Off” disables this detection.
10 Front K-Band ”K-Band On“ “Front K-Band On” Enables the detection of K-Band
radar from front receiver.
“Off” disables this detection.
Default Setting
(voice confirmations)
Menu Options
(in sequential order) Desc iption
RL200di Expe t
System RL360di Expe t
System

13
11 Front Ka-Band ”Ka-Band On“ “Front Ka-Band Enables the detection of Ka-Band
On” radar from front receiver.
“Off” disables this detection.
12 Rear Radar “Rear Radar On” Allows user to turn off rear radar
/A (important when traveling in
states or countries where radar
detectors are illegal).
13 Rear X-Band “Rear X-Band On” Enables the detection of X-Band
/A radar from rear receiver.
”Off” disables this detection.
14 Rear K-Band “Rear K-Band On” Enables the detection of K-Band
/A radar from rear receiver.
”Off” disables this detection.
15 Rear Ka-Band “Rear Ka-Band Enables the detection of Ka-Band
/A On” radar from rear receiver.
”Off” disables this detection.
16 Laser Defuser “Laser On” “Laser On” Enables the Laser Defuser.
“Off” disables the Laser
Defuser.
17 Laser Settings “Laser Constant “Laser Constant Enables Laser Defuser for
Transmit” Transmit” constant transmit, pulse trans-
mit, or receive only.
18 Factory Reset “Factory Reset” “Factory Reset” Returns the system to its origi-
nal factory default settings.
Default Setting
(voice confirmations)
Menu Options
(in sequential order) Desc iption
RL200di Expe t
System RL360di Expe t
System
Customizable Settings

1414
MUTE
Press to mute audio alerts
for 30 seconds or the dur-
ation of the alert. Press
and hold for 3 seconds
to engage extended mute.
(page 8)
MARK TO ALERT
Press to “mark” specific
locations for alert.
(page 10)
SENSITIVITY
Press to select level of
radar detector sensitivity.
(page 7)
UP
Press to increase vol-
ume. Use to scroll and
change menu options.
(pages 8 & 11)
DOWN
Press to decrease vol-
ume. Use to scroll and
change menu options.
(pages 8 & 11)
POWER
Turn the K40 R 360di Expert /
R 200di Expert system on or off.
DIM
Adjust ED brightness.
(page 7)
QUIET RIDE
Press to confirm speed
setting and enter Quiet
Ride menu. (page 8)
MARK TO MUTE
Press to mute a specific radar
band / laser alert in a location.
(page 9)
MENU
Press to enter customiz-
able menu settings.
(pages 11-13)
Control Unit

Register your K40 system today
to a tivate your guarantees:
Guaranteed immunity from speeding tickets
If you get a radar speeding ticket within one year of purchase,
we’ll reimburse you for the full cost of the ticket.*
Guaranteed performance
If your K40 system does not outperform any other radar detector
you’ve owned, return it within 30 days for a full product credit.
Guaranteed from theft
If your K40 R 360di Expert / R 200di Expert is ever stolen, we’ll
replace the stolen product.**
One-year warranty
K40 offers a one-year “repair or replace” warranty if your
K40 system fails to work properly.
*Offer not valid for speeding ticket violations incurred in school or
construction zones, or connected with a DUI or DWI.
**Requires proof of purchase and a police report.
Register your K40 system online today by visiting
K40. om
15

Product subject to one or more of the following patents:
U.S. Patents 7,298,248 B2
5,001,777
RE39,038
RE40,653
RE41,905
Other patents pending
Learn more at K40. om ©K40 Electronics
FCC IDS: W75-M2K- 24 W75-RL-RCU II
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
In addition, any changes or modifications to this
product, which are not expressly approved by K40
Electronics in writing, could void the user’s authority
to operate this product.
16

Our Promise
TO EXCEED...
Customer expectations through the pride and dedication of our
strong team of caring and talented employees by being the “Model
of Excellence” in the entire industry on every level — from innovative
product design and flawless manufacturing to knowledgeable sales
and total customer service.
TO PROVIDE...
The most superior and progressive radar detectors and laser jamming
solutions on the worldwide market with guaranteed performance by
delivering tomorrow’s solutions today through the most advanced
technology systems and state-of-the-art radar detection defense.
TO ENSURE...
The total commitment of our entire staff to all customers before,
during, and after the sale with personalized direct “24 / 7” cus-
tomer support — and going the extra mile with product selection
and usage assistance in step with individual needs to achieve the
most dependable radar detection performance and success.

Letter From the President
Thank you very much for your recent purchase of the most progressive
radar and laser solution available on the market today.
Our ultimate goal is that you, our valued customer, is empowered
with peace of mind and unparalleled radar protection.
Because we care about you, we’re still the only company that stands
behind every product with a comprehensive speeding ticket guarantee.
If you get a ticket, we pay for it! That’s right, guaranteed!
Whether you are a first-time customer or a lifelong friend, we sin-
cerely appreciate your confidence. We’ll always go that extra mile to
provide you with what’s new and the latest in leading-edge radar and
laser technology.
Our products are detailed and customized to specifically serve the
needs of every vehicle and driver. We promise you that there never is
a cookie-cutter approach here.
Again, thank you for your business. Your safety and protection is what
we’re all about!
Sincerely,
Peggy Finley
Owner/President

44879 1/18