Kael Astro-05 User manual

Easy to use with English menu

2 Relay Output (8A) ; ASTRO-05

Real time cloc and calender

56 programs

Prayer, astronomical or/and time switching function

Automatic or manual summer/winter time option

ON/OFF switching times

Graphical simulation program for both outputs

Automatic sunrise/sunset calculation using coordinates

and time

Offset for adjustable programming of sunrise/sunset times

Quiet mode

PIN code protection

Easy to program with PC Software

Optical loading the programs with CON-3 Device

2 Manual modes

Astronomical & Prayer

Time Switch

ASTRO-05 and ASTRO-15

KAEL ASTRO Software

Push in this direction and

remove the battery cover

eneral:

ASTRO is a digital time switch that calculates the sunset,sunrise and

prayer times by using coordinates and real time cloc . It operates

according to the program setting and it has no need for a photocell

sensor. Device could be used as astronomical, prayer or digital time

switch.

ASTRO has two reserves to protect the real time cloc and calender

against power outage.

For long term reserve there is CR2032 battery. If the device is powered,

battery life is approx. 5 years. When the battery life is expired,the user is

able to replace the battery easily.

Super capacitor is used for short time power failures. It supplies the

device for 3-7 hours. In this case battery is not used, so battery level is

conserved.

NOTE1: Before commissioning the device, please insert the battery into

the battery compartment .

NOTE2: If the device is not powered, ASTRO automatically enters power

save mode to conserve the battery life. When the device is in this mode

LCD screen is turned off. The screen would turn on when pressing any

button and so the user would be able to change the settings and

programming the device manually. After 15 seconds of inactivity, the

screen would be turned off again.

NOTE3: 4 preset programs are available on the device.

Program 1 : Relay A Astro Sunset ON

Program 2 : Relay A Astro Sunrise OFF

Program 3 : Relay B Astro Sunset ON

Program 4 : Relay B Time 00:00 OFF

User replaceable battery

Astronomical mode

Timer mode

Cloc

Date

Relay A

12 1

Cloc faces represent output states of the relay

contacts during current day.

Before midday, am icon appears.

After midday, pm icon appears.

There are two cloc faces, on the left for Relay A

and on the right for Relay B.

Screen Descriptions:

Area of Usage:

- Heating systems in mosques according the prayer times

- Par , garden and farm irrigation

- Street, par , garden illuminations

- ATM ,store window, billboard illuminations

Insert the battery with

the positive(+) side facing up

as shown in the figure.

CON-03

Usb to infrared data transmitter

www.kael.com.tr 1

Prayer mode

Loc function

Quiet mode

Manual mode

Relay B

Loc function

Quiet mode

Manual mode

Monday

Tuesday

Wednesday

Thursday

Friday

Saturday

Sunday

Warnings:

- The connection of device must be done by authorized technical

service staff according to the wiring diagram.

- Before ma ing the connections to device's terminals, please be

sure that there is no voltage across the cables or terminals. Also be

sure that the panel is de-energized.

- Before cleaning the device, please be sure that it is de-energized

and use only dry tissue-paper to clean it. Water or any other

chemicals used for cleaning may harm the device

- Before commissioning the device, please be sure that the terminal

connections are made exactly

the same as in the connection diagram

- To protect the device, please mount it on DIN rail in a panel.

- Contact your authorized dealer, if a problem occurs with your

device.

Following the precautions is to prevent the users from physically and

spiritual damage. The manufacturer is not responsible for any injuries

or damages due to violation of the warnings.

Button Functions:

ASTRO is an easy to use device with 3 buttons.

▼ : Press to move between menus or decrease the

related parameter.

▲ : Press to move between menus or increase the

related parameter.

SET : Press to go into the menu or save the related

parameter.

▼ ▲: Press two buttons at the same time to go bac to the pre-menu screen

Press two buttons long at the same time to return to the main screen.

Preset and adjustable Fajr and Isha twilight angles

2 Relay Output (16A) ; ASTRO-15

No Bac light ; ASTRO-05

Backlight ; ASTRO-15

Ma e sure the battery is seated

correctly in the battery slot.

Replace the battery cover.

www.kael.com.tr 2

MANUAL MODE

Manual mode is used for setting or testing the desired relay output, or

deactivating the program operation. This mode could be activated for

both of the relays separately. If output A is loc ed it can't be switched

to manual mode for output A, but it can be switched for output B.

For bloc ing the activation of manual mode, the related output should

be loc ed. Loc function is described on page 7.

There are two different manual modes.

1-TEMPORARY MODE : When the subsequent program steps in,

temporary manual mode would be deactivated.

Temporary manual mode for Relay A :

Push ▼ button until the flashing hand icon appears on the left of the

screen.

Throughout the manual mode, for changing Relay A output, it is

necessary to push and release ▼ button.

In this mode, if the subsequent program for Relay A changes the

output, manual mode would be deactivated automatically and

ASTRO operates the program. Otherwise manual mode would

continue to be active for Relay A.

To deactivate this mode for Relay A as an option, push ▼ button until

the flashing hand icon disappears.

Temporary manual mode for Relay B :

Push ▲ button until the flashing hand icon appears on the right of the

screen.

Throughout the manual mode, for changing Relay B output, it is

necessary to push and release ▲ button.

In this mode, if the subsequent program for Relay B changes the

output, manual mode would be deactivated automatically and

ASTRO operates the program. Otherwise manual mode would

continue to be active for Relay B.

To deactivate this mode for Relay B as an option, push ▲ button

until the flashing hand icon disappears.

2- PERMANENT MODE : It is only possible to deactivate permanent

mode as manually.

Permanent manual mode for Relay A:

Push ▼ and SET buttons at the same time until the hand icon

appears on the left of the screen.

Permanent manual mode is not deactivated automatically. The only

way to deactivate this mode is manually.

Throughout the manual mode, for changing Relay A output, it is

necessary to push and release ▼ button.

To deactivate this mode for Relay A, push ▼ button until the hand

icon disappears.

Permanent manual mode for Relay B:

Push ▲ and SET buttons at the same time until the hand icon

appears on the right of the screen.

Permanent manual mode is not deactivated automatically. The only

way to deactivate this mode is manually.

Throughout the manual mode, for changing Relay B output, it is

necessary to push and release ▲ button.

To deactivate this mode for Relay B, push ▲ button until the hand

icon disappears.

MENUS:

Press SET button on the main screen to access the menus. If the

loc function is deactivated, PROG menu appears on the screen. Use

the direction buttons to see ADJUST,DISPLY and EXIT

PRO RAM MENU:

Press SET button on PROG screen to

access the Program Menu. Use the

direction buttons to see

NEW,CHANGE,DELETE and EXIT

menus.

NEW : New programs are created.

CHANGE : Existing programs could be

changed.

DELETE : Existing programs could be

deleted. It is possible to

delete all of them or the selected one.

SET

▲

SET

PRO RAM:

All program settings could be done.

Creating new program, changing or

deleting an existing program.

ADJUST:

Device settings could be done.

information :

In this menu, program and device

settings could be monitored without

ma ing changes. Use the direction

buttons to see information about sunrise,

sunset, programs, memory status,

season (summer-winter), latitude,

longitude,quiet mode status.

SET

▲

ınfo

prog

adjust

back

SET

▲

SET

ADJUST MENU:

In this menu, device settings could be done.

Real Time Cloc and Calender could be set

in TIME menu

In this menu, daylight saving time settings

could be done. If AUTO is chosen, device

determines beginning dates of the summer

and winter automatically.

Coordinates and time zone settings of the

location could be done in this menu.

Prayer times calculation method could be

set in this menu.

Loc function could be activated to prevent

unauthorized persons from using the device.

This mode could be activated for both of the

relays separately.

Quiet mode could be activated to stop the

program operation for a certain period.

In this menu, PIN code could be changed.

PIN code is a 4 digit number.

Infrared (con03) communication could be

Enabled or disabled

Language could be changed to tur ish or

english

All device settings except time and date are

set to default.

The device could be restarted time and date

Settings would be cleared.

ınfra

Langua

defaul

reset

▲

back

Prayer

DISPLAY

SET

www.kael.com.tr 3

▲

SET

▲

SET

ABA

▲

SET

Information about

first program Information about

second program

Program memory status is monitored.

Season information is monitored as

Summer,Winter or Off.

astronomical

Relay A

Quiet mode for Relay B is

not activated.

Quiet Mode for Relay A is active between start and

stop date.

Example: Start Date is 20.03.2011 and stop date

25.03.2011

Quiet Mode starts on 20th March at 00:00 am. and

ends on 25th March at 23:59.

During this time period Relay A would be off.

To activate Quiet mode for 1 day, start and stop date

should be set as same day.

▲

SET

In this menu, information about sunrise, sunset, prayer times, programs, memory status, season (summer-winter),

latitude, longitude,quiet mode status could be monitored .

Sunrise time of the

related location.

Sunset time of the

related location.

All contents of the programs could be

observed.

Fajr time of the related

location.

Dhuhr time of the

related location.

Asr time of the related

location.

Maghrib time of the

related location.

Isha time of the related

location.

locate

ınfo

SET

▲

▼

▲

▼

▲

▼

▲

▼

▲

SET

▲

SET

SET SET

SET

SET SET

www.kael.com.tr 4

SET

▲

SET

▲

SET

▲

SET

▲

SET

▲

SET

▼

▲

SET

FOR PRAYER TIMES

+ OFFSET : OFFSET is added to related prayer

time

- OFFSET : OFFSET is subtracted from related

prayer time

Prayer mode

Astronomical mode

Monday

Time mode

CREATIN PRO RAM

Press SET button to access PROG menu. If the program memory is not full,NEW menu appears on the

screen.

After entering to NEW menu, the first free area of the memory automatically appears on the screen for a while.

With using the direction buttons, the program operation mode is selected as

astronomical or time switch.

If time program is selected,

hour,minute and second

values are entered.

Sunset or sunrise is selected. As an

option ±OFFSET value could be set.

+ OFFSET : OFFSET is added to sunrise or sunset time

- OFFSET : OFFSET is subtracted from sunrise or sunset time

For related program, desired relay output is selected.

Required contact position is selected as ON or OFF

If YES is selected, program operation is enabled for flashing day.

If NO is selected, program is not used for flashing day.

This process is repeated for each day of the wee .

After ma ing choice for the last day of the wee , program could be stored

with selecting SAVE or could be cancelled with selecting EXIT.

If ALL is selected, program operation is enabled for every day.

If SELECT is selected, program operation is enabled for desired days.

▲

SET

▲ ▲

▲

SET

DELETIN PRO RAM

Silindi

SET

SET SET

To access DELETE sub-menus, SET button is

pressed on DELETE screen. It is possible to

clear the whole program memory with selecting

ALL menu. For deleting a single program,

related program should be chosen.

For confirming delete operation SET button is pressed on YES screen

Pressing SET button on NO screen cancels the delete operation .

With using ▲ button in PROG submenus, DELETE menu is reached.

SET

▲

ABAB

SET

▲

▼

▲

▼

▲

▼

▲

▼

▲

SET

▲

SET

SET SET

SET

Monday Monday

SET SET

SET

▲

SET

▲

SET

▲

SET

▲

SET

▲

SET

▼

▲

SET

www.kael.com.tr 5

Astronomical mode Time mode

CHANGE menu could be reached by pressing ▲ button in PROG sub-menus.

NOTE: If there is no program on the memory, CHANGE menu does not exist.

CHAN IN PRO RAM

SET button is pressed on CHANGE menu. The programs that has been

set before, appear on the screen with using the direction buttons

respectively.

SET button is pressed on desired program to change.

Sunrise or Sunset is set. If it is desired,

OFFSET would be adjusted.

FOR PRAYER TIMES

+ OFFSET : OFFSET is added to related prayer

time

- OFFSET : OFFSET is subtracted from related

prayer time

+ OFFSET : OFFSET is added to sunrise or sunset time

- OFFSET : OFFSET is subtracted from sunrise or sunset time

For related program, desired relay output is selected.

Required contact position is selected as ON or OFF

If YES is selected, program operation is enabled for flashing day.

If NO is selected, program is not used for flashing day.

This process is repeated for each day of the wee .

After ma ing choice for the last day of the wee , program could be stored

with selecting SAVE or could be cancelled with selecting EXIT.

If ALL is selected, program operation is enabled for every day.

If SELECT is selected, program operation is enabled for desired days.

Prayer mode

www.kael.com.tr 6

SET

▼

▲

SET

▼

▲

▼

▲

▼

▲

▼

▲

TIME AND DATE

In ADJUST sub-menus could be accessed TIME menu.

With using ▼▲ buttons, year value is increased or decreased.