KaiCong SIP1018 User manual

IP Camera
（KaiCong IP camera SIP1018）
KaiCong Ares
SIP1018 U Us se er r m ma an nu ua al l
2013-03-20 V1.0

Kaicong-Nothing important than safety!
Anything else ,please contanct me.
Index
1INTRODUCTION...........................................................................................................................4
2FUNCTION AND FEATURES .....................................................................................................4
3APPEARANCE AND INTERFACE.............................................................................................5
3.1 APPEARANCE............................................................................................................................5
3.2 INTERFACE OF EQUIPMENT.......................................................................................................6
4NETWORK CONNECTING.........................................................................................................8
4.1 CONNECTION INSTRUCTION......................................................................................................8
4.2 VISIT INSTRUCTION ..................................................................................................................9
5VISIT KAICONG™ SIP1018 FROM LAN .................................................................................9
5.1 SET IP ADDRESS.......................................................................................................................9
5.2 VISIT KAICONG™ SIP1018.................................................................................................18
6VISIT KAICONG™ SIP1018 FROM WAN ..............................................................................20
6.1 PORT FORWARDING ................................................................................................................20
6.2 DDNS ....................................................................................................................................21
6.2.1 Third Party DDNS .............................................................................................................21
7OTHER SETTINGS.....................................................................................................................22
7.1 NETWORK SETTING ................................................................................................................22
7.1.1 Basic Network Setting........................................................................................................22
7.1.2 WIFI Setting.......................................................................................................................23
7.1.3 ADSL Setting......................................................................................................................23
7.1.4 UPnP Setting......................................................................................................................24
7.1.5 DDNS Setting.....................................................................................................................24
7.2 ALARM SETTINGS...................................................................................................................24
7.2.1 Alarm Setting .....................................................................................................................24
7.2.2 Mail Service Setting...........................................................................................................25
7.2.3 FTP Service Setting ...........................................................................................................26
7.3 ADVANCED .............................................................................................................................27
7.3.1 User Setting .......................................................................................................................27
7.3.2 Multi Device Setting...........................................................................................................28
7.4 MAINTAIN...............................................................................................................................31
7.4.1 Device Information............................................................................................................31
7.4.2 Time Setting .......................................................................................................................31
7.4.3 Firmware upgrade.............................................................................................................31
7.4.4 Restore Factory Default.....................................................................................................32
7.4.5 User browsing Log.............................................................................................................32

Kaicong-Nothing important than safety!
Anything else ,please contanct me.
8CENTRALIZATION CONTROL................................................................................................33
9TECHNICAL PARAMETERS....................................................................................................51
10 FAQ...........................................................................................................................................52

Kaicong-Nothing important than safety!
Anything else ,please contanct me.
1 Introduction
The KAICONG™ SIP1018 combines a high quality digital video camera with network
connectivity and a powerful web server to bring clear video to your desktop from
anywhere on your local network or over the Internet.
Your KAICONG™ SIP1018 package should contain the following items, If any
of the listed items are missing, please contact your reseller from where you
purchased the camera for assistance.
The package includes:
KAICONG™ SIP1018 * 1
5V Power Adapter *1
Stand of plastic * 1
Cable * 1
2 Function and Features
The video is compressed by MJPEG. There are VGA/QVGA/QQVGA three optional
video resolutions. User can change some parameters according to their demands to
satisfy his own visual prefer.
With built-in Microphone, it enables user to monitor the sound on the site. User can
also connect this equipment to the speaker, and it supports two-way intercom
function.
It was equipped with pan/tilt function, horizontally 270°and vertically 90°. Its outlook is
smart, easy and convenient to install in many sites.
It adopts the TCP/IP network protocols and has inner web server. Users can browse
video through IE and other browsers. Data is transferred through one port; it is easy
for user to do the network setting.
Support 802.11b/g protocol, can build up wireless monitoring.
Supports UPNP, port forwarding automatically on the router.

Kaicong-Nothing important than safety!
Anything else ,please contanct me.
Motion detection and alarm pin can be connected to external sensors to detect
environmental situation.
Alarming record can be stored by email, FTP server. External alarm can be open
when detecting unusuality. It also sends alarm info to the alarm server.
Infrared LED for night vision covers 5m area, to realize 24 hours monitoring.
Support three levels of user authority.
Support upgrading online.
Manufacturer provides free software, supports Multi-view, Long time recording, video
replay etc.
3 Appearance and interface
3.1 Appearance

Kaicong-Nothing important than safety!
Anything else ,please contanct me.
Figure 1
Note：
Status Indicator: the green light is to show the status, when device running, Slow
flicker（one per 2 second）， indicates the device is searching for network; flicker（one
or twice per second）, indicates the wired network connected; Frequent flicker（2~3
times per second）, indicates wireless network connected.
3.2 Interface of Equipment

Kaicong-Nothing important than safety!
Anything else ,please contanct me.
Figure 2
1）Audio Output Socket: Audio output socket is for line-out audio player, such as
headphone, speaker, etc.
2）RJ45 Ethernet Socket: RJ45 Ethernet socket is 10/100M self-adjust. The
equipment can connect to all kinds of network equipments, such as hub, router,
switch, etc.
NOTE: Factory setting IP is 192.168.0.178, the http port is 80, the username is
admin, the password is 123456.
3）WIFI Antenna Hole: Install the WIFI antenna.
4）Alarm Output Socket: The alarm output socket is connected with a relay in the
KAICONG™ SIP1018. KAICONG™ SIP1018 will control the switch to trigger the
alarm bell or buzzer to alarm. The relay is able to control the switch of a alarm whose
voltage is no more than 36V, and current is lower than 2A. Please refer to the Figure
3 for the connection of an external alarm.
Figure 3
5）Alarming Input Pin: Please refer to the schematic Diagram of Figure 4 for how
external detector collects alarm information.
Output Pins
Alarm power
Alarm
Switch

Kaicong-Nothing important than safety!
Anything else ,please contanct me.
The detector should be switched type (always on or always off). If the detector has
detected the smoke or people or animal to enter the area, the detector will switch on
or switch off.And it will send the external alarm signal into the KAICONG™ SIP1018.
Figure 4
6）Power Input Socket: Connect DC adaptor, its output should be 5V power
specification.
7）RESET Button: reset button is on the bottom of the device, Press the RESET button
and hold on more than 10 seconds, the equipment will restart and recover to the
factory default settings.
4 Network Connecting
Figure 5
4.1 Connection Instruction
Before visit the KAICONG™ SIP1018, you should firstly connect it to the Network, supply
the power to it, and check if the light of RJ45 Socket is normal to make sure all of the
communication links are fluent. The connection method is like as Figure 5.
1) KAICONG™ SIP1018-1 and KAICONG™ SIP1018-2 are connected separately to 2
PIR
PIR Power
Input
pins
Switch

Kaicong-Nothing important than safety!
Anything else ,please contanct me.
different LANs.
2) And these 2 LANs are already connected to the Internet. In order to get the LANs to
be connected to the Internet, they are required to be equipped with router and to
apply for the communication link from the local Internet Service Provider (ISP) and
connect to it byADSL or optical fiber, etc.
3) PC-3 is connected to the Internet.
4.2 Visit Instruction
To visit the KAICONG™ SIP1018, you should do some settings of KAICONG™ SIP1018
and Internet besides getting the communication link fluency.
1) The PC and KAICONG™ SIP1018 are in the same LAN. If you want to use this PC
to visit the KAICONG™ SIP1018, you need to make sure their IP address is at the
same segment. Otherwise you need to do the reset of the KAICONG™ SIP1018’s IP
address. For example, the KAICONG™ SIP1018-1’s IP address in Figure 5 is
192.168.1.139 (at the segment of 192.168.1), while the PC-1’s IP address is
192.168.0.175 (at the segment of 192.168.0), then you will be not able to visit the
KAICONG™ SIP1018 through the PC-1. You need to change the KAICONG™
SIP1018-1’s IP address to 192.168.0.139 firstly.
2) The PC and KAICONG™ SIP1018 are in different LANs, but they are all
connected to Internet. For the KAICONG™ SIP1018-1 and PC-2 in Figure 5, if you
want to visit KAICONG™ SIP1018-1 by PC-2, you should firstly do the setting as 1)
to make sure that you can visit KAICONG™ SIP1018-1 through PC-1 and then do
the setting of router-1 (do the port forwarding from the router). The PC-2’s visit
application could be sent through router-1 to KAICONG™ SIP1018-1. Normally,
PC-2 could only send the information to router-1, if you don’t do the setting of
router-1, then PC-2 could not visit KAICONG™ SIP1018-1.
5 Visit KAICONG™ SIP1018 from LAN
5.1 Set IP Address
The IP addresses of KAICONG™ SIP1018 and PC should be at the same segment, for
Figure 5, the KAICONG™ SIP1018-1 can’t be visited. Run the BSearch_en.exe in the
CD, click Search button, and then select the KAICONG™ SIP1018-1 to reset the IP
address, as the Figure 6.
Setting Instruction:
Please carefully check the “Local PC information” on the top left corner which lists
the PC configuration. If there are several network adapters in the PC, please select
the one you are using and make sure the IP address of KAICONG™ SIP1018 is as
the same segment of the PC.
Change the content of “IP config” on the right to make sure the content is the same

Kaicong-Nothing important than safety!
Anything else ,please contanct me.
as “Local PC information”. Only the last section of the IP address which needs
setting by yourself, you can set it as 139 just like Figure 6.
If you don’t know how to fill out the content of “IP config”, you could also tick
the “Set IP automatically” to get the IP address from the router automatically.
Put the user name and password into “Authentication” (By default, the user name
is: admin, password is: 123456). Click “Update”. The setting will take effect now.
Select the device in list box, click “Browse” button, it will open the Browser
automatically and pop up a window at the same time which requires to inputting the
user name and password. Then you see the home page of the KAICONG™
SIP1018-1, click “English” on the right-top corner, just as below Figure 7. On the
right corner of the interface, user can choose the language.
Search IP Camera
Download Software
http://kaicong.net/download/KaiCongIPCameraFinder.zip
Operate Software
Choose "English" and Click "Advance Mode" , search IP Camera