KAM ZP10 User manual

1
For the latest instruction manual updates and information on the entire Kam range visit:
www.kam.co.uk
Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ
Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: [email protected] • Web: www.lambaplc.com
INSTRUCTION ANUAL
ZP Wedge series
Passive and active foldback wedge monitors
Plug & Play
Foldback monitor speakers
Passive and active models
Full range, two way design
8 Ohms impedance
Classic wedge shape
Pole mount
Carry handles
ANUAL VERSION 1.0

T ank you for purc asing t is product, we are sure t at it will serve you for many years to come.
To optimise t e performance of t is product, please read t ese operating instructions carefully to
familiarise yourself wit t e basic operations of t is unit.
T is unit as been tested at t e factory before being s ipped to you. T ere is no assembly required.
To prevent or reduce t e risk of electrical s ock or fire, do not expose t is unit to ig temperature and
rain or moisture.
Unpacking
Please unpack your new product carefully, your new product should reach you in perfect condition. Please check
that no damage has occurred during transit. If any damage is found, do not operate your unit. Please contact the
retailer you purchased it from immediately.
Safety
If there is any damage to the mains cable (if applicable) do not use the device. Always disconnect the unit from the
mains supply when carrying out any servicing or cleaning of the unit.
Connections and controls
Kam ZP10 passive speakers
6.35mm jack audio input and 6.35mm jack audio output/link
Kam ZP12 passive speakers
Speakon audio input and Speakon audio output/link
Kam ZP10A active speakers
6.35mm jack line level input and 6.35mm jack line level output/link
XLR microphone input
Jack audio output
Power On LED
aster volume
icrophone/line input gain
Kam ZP10A active speaker input and output panels
Kam ZP Wedge series
Passive and active foldback wedge monitors
2

Kam ZP12A active speakers
6.35mm jack line level input and 6.35mm jack line level output/link
XLR microphone input
Speakon audio output
Power On LED
Clip LED
aster volume
icrophone/line input gain
Graphic equaliser
Kam ZP12A active speaker input
Kam ZP12A active speaker output
Important information on Kam ZP Active Wedge speakers - UK customers
The wires in the mains lead are coloured in accordance with the following code:
Green/yellow = earth
Blue = neutral
Brown = live
T is appliance must be eart ed
3

Tec nical specifications ZP10 ZP12 ZP10A ZP12A
Frequency response: 72-20KHz 55-20KHz 72-20KHz 55-20KHz
Sensitivity 1w/1m: 96dB 97dB 96dB 97dB
ax SPL: 116dB 119dB 117dB 119dB
Power handling: 100w 150w 140w 200w
Horn flare dispersion: 90º x 45º 90º x 60º 90º x 45º 90º x 60º
Crossover frequency: 5000Hz 3500Hz 5000Hz 3500Hz
Impedance: 8 Ohms 8 Ohms 8 Ohms 8 Ohms
Input/Link connectors: 2 x jack 2 x speakon 2 x jack 2 x jack
Output connector: n/a n/a Jack Speakon
ic input connector: n/a n/a XLR XLR
Pole mount: Yes Yes Yes Yes
Carry handle: Yes Yes Yes Yes
Dimensions (WxHxD mm): 370x442x319 412x547x360 370x442x319 412x547x360
Weight: 12Kg 17Kg 15.5Kg 21.5Kg
4
Due to continuous product development, specifications and appearance are subject to change.
If this product is ever no longer functional please it take to a recycling plant for environmentally friendly disposal.
© COPYRIGHT LA BA plc 2009. E&O E.