K&F Concept F8 User manual

4G Solar Camera
Instruction Manual
Model: F8
email: [e-mail]

Due to the continuous updating of the product&software,
there may be a discrepancy between this user guide and
App interface. All the instructions are subject to the actual
operation interface.
Manual contents are subject to change without notice in
accordance with our policy of continuous product
improvement. The actual interface is subject to the camera APP
interface you get. lf you have any problems or suggestions,
please feel free to contact us by sending e-mails to our official
E-mail: [email protected],
www.kfconcept.com
WARM SERVICE
Please Scan For
More lnformation

English
I. Package Checklist 02
03-04
05
06-09
10-11
12-14
16
15
16
II. Product Description
III. Charging Instructions
IV. Product Connection
V. Product Installation
VI. APP Instructions for Use
15
VII. Specifications
VIII. FAQs
IX. Notice
X. FCC Warning Statement
󾙒󾙓


I. Package Checklist
󾙒󾙔
Camera * 1
Solar Panel * 1
Mounting Base * 1Screw Package * 1
Instructions * 1
Dome surveillance
camera
Important Tips* 1


II. Product Description
Indicator Lights
Lens
MIC
Antenna
Dual source Light
Light Sensor
PIR
Reset
Speaker
Charging indicator
SD Card Slot
（chip facing up）
Sim Card Slot
(chip facing down)
Power
󾙒󾙕


Function Module Description
Power key
press the power key for 1s until the red light is
on, which indicates that the device is turned on/off
successfully.
Reset key Long press for 5s to restore factory setting
4G SIM card Provide wireless communication
SD card Store video image files
󾙒󾙖


TIPS: When using the product for the first time, please use
a DC 5V-2A adapter to fully charge the product for about
10h.
III. Charging Instructions
There are two options to generate the daily power supply:
Use a DC 5V-2A adapter to charge the battery
Charge the battery with the solar panel
Charging indicator
Indicator Lights
Scene Indicator status
While charging Green light on
Fully charged Green light on
󾙒󾙗
󾙓
󾙔
Scene Indicator status
While charging Green light on
Fully charged Not light up
Charging indicator
Indicator Lights


1. Please insert the SIM card into the machine under
shutdown, and then start up
TIPS: The complimentary SIM card has better compatibility. 50m traffic is
given free of charge after opening, which is valid for 30 days and
can be renewed later.
IV. Product Connection
Schematic diagram 1
(insertion direction)
Scene Indicator status
Turn on press the power key for 1s
until the red light is on
Successful identification
of SIM card
Red light and blue light flash
alternately, and finally turn into
blue light for about 1 min
󾙒󾙘
Sim Card Slot
(chip facing down)


2.Download APP:
Two download methods:
Supporting devices: Smartphones, excluding iPad.
Supporting systems: Andorid 5.0 and above, iOS 10.0 and above.
Please open all APP application permissions during installation, otherwise
you can not connect to the device and receive the alert notice.
Search for "UBOX" download in APP Store
Scan the QR code to download
󾙒󾙙
󾙓
󾙔


TIPS1: You shall connect to the Internet by mobile phone
during installation
3.Register and log in account number:
Please register your account with your mailbox.
Tips: Reasons for unsuccessful registration:
The mobile phone network is not turned on, or the APP does not
have the permission to use the network and location.
Mailboxes with att.net, msn.com, or hotmail.com suffixes may not
receive authentication messages.
If you can not receive the authentication code, please check
whether you have received it in the junk mailbox.
TIPS2: You shall open the system push messages
󾙒󾙚
󾙓
󾙔
󾙕