Kandolite KLB36W3RGBAW User manual

USER MANUAL
KLB36W3RGBAW

I n d e x
summarize ............................................................................3
safety instruction ....................................................................3
outside size picture..................................................................4
main function .........................................................................5
DMX controller function ............................................................5
Display operation instruction.....................................................9
Manual instruction ................................................................. 10
Operatin control instruction ................................................... 11
XRL connection instruction...................................................... 13
Connection picture................................................................. 14
Problem analyze.................................................................... 15
Technical specification……………………………..……………………………….………16

Summarize
Thank you for purchasin our LED wall wash li htin . Please read these
instructions carefully before be in and operate the fixtures accordin to these
instructions to avoid any possible dama es and accidents causes by misusa e.
Products introduce
This led wall washin li ht is covered by tensile aluminum, desi ned in a
fashion of hydrodynamic form. It takes uses hi h bri htness R, G, B, A, W 5
kinds LED. Each kind of LED can be independently dimmer. It uses power
switch, performs low wei ht and consumption, stable capability and lon life.
The built-in pro ram includes dimmer, strobe, eotic, radual chan e, fadin
and so on. International standard DMX 512 si nal is requested.
Packing ist
KLB36W3RGBAW fixtures 1 pcs
KLB36W3RGBAW bracket 2 pcs
Quick release lock 4 pcs
DMX Cable 2 pcs
Power-in cable 1 pcs
The use manual
Warranty Card
Safety Information
Safety Notes
! Enquire the skilled people before any repair;
! Always make sure disconnect from the power source before settin up, servin
and movin ;.
! Avoid direct eye exposure to the fixture when it is on;

Safety instruction
● Make sure the power supply volta es are consistent with this li hts，Ensure
the use of volta e is in the ran e of the request technical parameter.
●before the installation, please check the li ht’s fasteners and mechanical
structure have been received in ood condition and appear no dama e.
● This li ht is desi ned for indoor use, workin temperature is lower than 40
de ree.
●The fixtures maybe mounted in any position provided there is adequate
room for ventilation. Make sure there are no inflammable and explosive
items (ornaments) in 0.5 meters away.
●Yellow / reen cablin earthlin safety; no flicker when the fixture is workin
on.
Outside Size Picture

Main Function
•Protection ratin : IP20, in door use.
•Unique coolin mode, li ht source and control completely separated,
nature coolin mode
•DMX512 Controller，DMX ID address with 4 di itals display with On/Off
function
•master slave/interconnected multi-machine control
•lens de ree: 15º、25º、45º optional
•usin switchin power supply to protect the LED to work well
•Strobe、radual chan e、jumpin chan e
DMX Contro Function
3CH
Channe DMX Va ue Contro Function Remark
1CH 0-255 R dimmin 0-100%
2CH 0-255 G dimmin 0-100%
3CH 0-255 B dimmin 0-100%
4CH
Channe DMX Va ue Contro Function Remark
1CH 0-255 R,G,B mixin dimmin 0-
100%
2CH 0-255 A dimmin 0-100%
3CH 0-255 W dimmin 0-100%
4CH 0-255 General dimmin 0-100%
5CH
Channe DMX Va ue Contro Function Remark
1CH 0-255 R 0-100%
2CH 0-255 G 0-100%
3CH 0-255 B 0-100%
4CH 0-255 A 0-100%
5CH 0—255 W 0-100%

9CH
Channe DMX Va ue Contro Function Remark
1CH 0-255 General dimmin 1
2CH 0-255 Red Dimmin 0——100% 1
3CH 0-255 Green Dimin 0——100% 1
4CH 0-255 Blue Dimmin 0——100% 1
5CH 0-255 Amber Dimmin 0——100% 1
6CH 0-255 White Dimmin 0——100% 1
0-14 Dimmin
7CH 15-255 Strobe Speed
3
0-3 Invalid
4-31 Mode 1(4 is the slowest,31 is
fastest)
32-59 Mode 2
60-87 Mode 3
88-115 Mode 4
116-143 Mode 5
144-171 Mode 6
172-199 Mode 7
200-227 Mode8
8CH
228-255 Mode1~8
3
0-14 Invalid 9CH
15-255 Color chan in ,255 is the
fast
2

15CH
Channe DMX Va ue Contro Function Remark
1CH 0-255 R1 0——100%
2CH 0-255 G1 0——100%
3CH 0-255 B1 0——100%
4CH 0-255 A1 0——100%
5CH 0-255 W1 0——100%
6CH 0-255 R2 0——100%
7CH 0-255 G2 0——100%
8CH 0-255 B2 0——100%
9CH 0-255 A2 0——100%
10CH 0-255 W2 0——100%
11CH 0-255 R3 0——100%
12CH 0-255 G3 0——100%
12CH 0-255 B3 0——100%
12CH 0-255 A3 0——100%
12CH 0-255 W3 0——100%

19CH
Channe DMX Va ue Contro Function Remark
1CH 0-255 General 0——100% 1
2CH 0-255 R1 0——100% 1
3CH 0-255 G1 0——100% 1
4CH 0-255 B1 0——100% 1
5CH 0-255 A1 0——100% 1
6CH 0-255 W1 0——100% 1
7CH 0-255 R2 0——100% 1
8CH 0-255 G2 0——100% 1
9CH 0-255 B2 0——100% 1
10CH 0-255 A2 0——100% 1
11CH 0-255 W2 0——100% 1
12CH 0-255 R3 0——100% 1
13CH 0-255 G3 0——100% 1
14CH 0-255 B3 0——100% 1
15CH 0-255 A3 0——100% 1
16CH 0-255 W3 0——100% 1
0-14 dimmin 17CH
15-255 Strobe speed
3
0-3 invalid
4-31 Mode 1(4 is the slowest,31 is
fastest)
32-59 Mode 2
60-87 Mode 3
88-115 Mode 4
116-143 Mode 5
144-171 Mode 6
172-199 Mode 7
200-227 Mode8
18CH
228-255 Mode1~8
3
0-14 Invalid 19CH
15-255 Color chan in ,255 is the fast
2

Disp ay Operation
MENU : access the menu or return to a previous menu option
ENTER : select the current menu option
UP : menu selection or parameter increments
DOWN : menu selection or parameters decrease

Manua Instruction
Addr d001-d512 DMX mode
SLAU SL.AU Slave mode
CHnd 3CH\4CH\5CH\9CH\15CH\19CH DMX channel mode
SP-- SP00-SP15 Speed adjust mode
Pr-- Pr00-Pr15 Build-in pro ram
ASC- AC00-AC15 Color jump
MENU
FAdE FA00-FA15 Color fadin
FLAS FL00-FL15 White strobe
rL-- r.000-r.255 Red dimmin
GL-- G.000-G.255 Green dimmin
bL-- b.000-b.255 Bule dimmin
AL-- A.000-A.255 Amber dimmin
UL-- U.000-U.255 White dimmin
SouA So
。 uA Sound active
LED on/Off Display panel ON/Off

Operating instruction:
•MENU（UP/DOWN）+ENTER+UP/DOWN）+ENTER
•For example, choose DMX mode, operate as follows:
•Press MENU, o back to the initial settin
•Press UP / DOWN until Addr
•Press ENTER to choose, the display will lintin at this moment
•Press UP / DOWN to chan e the address code to select d001
• Press ENTER to select and store the current menu options. DMX mode
will be
• Stored automatically and the screen will stop lintin .
•DMX channel choosin Operation：CHNd mode
•Press Menu, o back to the initial settin
•Press UP/DOWN，until shows “CHNd”
•Press ENTER to access the menu items to select, the screen will now be
lintin
•Press UP/DOWN to chan e the DMX Channel: 3CH、4CH、 5CH
•At last, press ENTER to confirm, if it delay for 3 second , DMX channel
choosin will be saved, and o back to DMX receive mode(d001); If your
press ENTER for short time or not press , delayin for 8 seconds , the
DMX channel will select to be saved automatically, and then o back to
DMX receive mode(d001)
•Close the display panel
•Press Menu, o back to the initial settin
•Press UP/DOWN，until shows “LED”
•Press ENTER to access the menu items to select, the screen will now be
lintin
•Press UP/DOWN to choose “Off”

•At last, press ENTER to confirmed and choose the workin mode. The
panel will auto closed if no operation for 15 seconds. Press any button to
active it.
Detai s of program bui t inside（
（（
（Pr- -）
））
）
Pr00:Red: Pr01:Blue: Pr02:Green；
Pr03:Amber: Pr04:White Pr05:Red+Blue+Green；
Pr06:White+Amber: Pr07：Mode 1 Pr08：Mode 2
Pr09：Mode 3: Pr10：Mode 4 Pr11：Mode 5
Pr12：Mode 6: Pr13：Mode 7 Pr14：Mode 8
Pr15：Mode 1-8
Remark:
Pr07----- Pr15 adjust the speed SP00 is fastest，
，，
，SP15 is s owest
Operating Contro Instruction
Master/S ave
Master ：The master should always workin as a master as lon as it is not
set in a DMX mode whatever other modes it is. And it send out
the si nal so that the slave synchronous with it. To avoid the host
si nal and DMX512 si nals interfere with each other, should cut
off the DMX512 si nals. The si nal lines are lon er than 60
meters ,should increase a si nal amplifier.
Slave ：It must be in the SLAV mode and the address code should be
A001 to assure receive the master’s si nals correctly. Only one
li ht can be set as a Master and others are slaves.

XLR cab e connecting
The stand connection way of the XRL is: one end connect to the male
plu , and the other connect to the female
Noted: In order to avoid failures and interference si nal transmission,
We connect a resistance 120Ω
（
1/4W
）
at the end of the DMX
connectin as below
The Conversion between 3pin and 5 pin XLR
If the output cable of DMX512 controller is the 5PIN, please use 1pc
5PIN to 3PIN cable

Connecting picture
Cable connectin picture

Prob em Ana ysis
Problem Checkin way
Can not turn on the
li ht
Check the power source plu is in normal or not
Check the switch of the li hts is off or on
Check the fuse if in normal
DMX can not control it
Check the DMX cable is connect to the li hts or not
Check the DMX512 controller work in normal or not
Check the DMX cable is normal or not
Check if the li hts is in DMX mode
（
A001
）
Display not bri ht
When connect to the electricity did the led flash one time?
If so the power source is normal; If not please check if
the switch and the transformer has power out
Check if the power input of the IC board is normal
Check if the cable connect to the display loose
Chan e the main board to see if it is normal.
Chan the display
LED not li ht
When connect to the electricity
，
did the led flash one time?
If so the power source is normal; If not
，
please check if
the switch and the transformer has power out
Check if the power input of the IC board is normal
Check if the cable connect to the display loose
Chan e the main board to see if it is normal.
Chan the display
Some of the LED not
li ht
LED is connect by leds in series first, then connect
parallel, so please check if the leds is loose
 Use the multimeter to check if the led is bri ht or not, of
not, please chan e the led
check whether current limitin resistor is normal or not
Check constant current IC is normal or not (compared
with the normal IC)
Sin le color leds always
bri ht/not bri ht
Check the switch of this color is normal or not
Chan e the IC control board

Technica Specification
● Input volta e：AC 100V-240V/50-60HZ
● Consume：200W
● Lamp Type：Hi h Power LED(3W)
● Lamp Spec：R（18PCS）, G（18PCS）, B（18PCS）, A（18PCS）, W
（18PCS）
● LED span:50000~100000 hours
● LED PWM dimmin frequency：>400Hz
● Control Si nal：DMX512, Master/Slave
● Control mode：stand alone/ DMX/ master and slaver
● Channel：3CH、4CH、5CH、9CH、15CH、19CH
● Color effect：R、G、B ,A,W mixin
● Function Effect：
：：
：dimmer, strobe, eotic, radual chan e
● Beam An le: 15°, 25°,45°
● Coolin mode: Natural Convection
● Anti-electricity intension：1.5KV
● Insulation Resistance：＞２MΩ
● Size:：1000*275*236.5mm
● Net Weight：10KG

Copyri ht 2012 KANDOLITE. All ri hts
reserved. Due to continuous
improvements and innovations,
specifications may chan e without
notice.