Kanguru MEGA MOUSE User manual

K
USER’S MANUAL
FCC COMPLIANCE STATEMENTS
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the Distance between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
TRADEMARKS
MS-DOS, Windows, Windows 98/2000/ME/XP are trademarks of Microsoft Corporation.
Macintosh and Mac are trademarks of Apple Computer
*All of the third-party brands and names are the property of their respective owners.

Table of Contents:
Introduction ............…………………………………….….……1
System Requirements.........................……...…………….…..… 2
Installation Procedure CF-MD-SM....………..……….………. 3
Installation Procedure SD-MMC-MS………………………..…4
Troubleshooting…..……………………………………………...5
1. Introduction:
Thank you for purchasing the innovative optical KanguruMega Mouse from
Kanguru Solutions!
The KanguruMega Mouse is an optical mouse and media card reader rolled into
one! Fast, precise movements are provided by the optical sensor and ideal for technical
and graphic related work. In addition, the rear of the mouse contains slots for reading
various media card formats.
The KanguruMega Mouse is available in two models:
• Compact Flash, IBM Micro Drives, and Smart Media compatible
• Secure Digital, Multimedia Card, and Sony Memory Stick compatible.
Please refer to the section that applies to your model for installation instructions.
2. System Requirements
Hardware:
Notebook or desktop computer with USB or USB2.0 port.
Operating system:
Win98SE, Win-ME, Win2000, Win XP, Mac OS X

Technical Specifications:
Model Kmouse- SDMSMMC Kmouse- CFSM
Interface USB1.1 USB1.1
Supported Media Secure Digital - Multimedia
Card - Sony Memory Stick Compact Flash - Smart Media – IBM MicroDrive
Access Time 9ms 9 ms
Transfer Rate 12Mbps 12Mbps
Dimensions 4-1/2" x 2 -1/2" x 1-1/2" 4-1/2" x 2 -1/2" x 1-1/2"
Weight .5 lb .5 lb
Warranty 1 Year Limited 1 Year Limited
Package Includes: Mouse
& Drivers CD Mouse & Drivers CD
3. Installation Procedure: CF-MD-SM
Note: In order to use the card reader function of the KanguruMega Mouse you must
install the drivers if your system requires them (Win98/2000). After the installation has
finished your PC will create two drives in “My Computer.” Flash memory cards can then
be accessed by opening the according drive in “My Computer.”
• Windows 98/2000
1.) Please install the required drivers before attaching the device to your computer.
2.) Insert the Kanguru Master Drivers CD into your CD-ROM drive and open the
KanguruMega Mouse folder. Next open the CF-MD-SM folder found under the
Drivers folder.
3.) Double-click the SETUP.EXE program to install the required drivers.
4.) An installation wizard will guide you through the installation process.
5.) Once the installation wizard has finished, simply plug the KanguruMega Mouse
into an available USB port to begin use.
• Windows ME/XP

1.) There are no drivers required for Windows ME and XP. These operating systems
provide the required card reader drivers.
• Macintosh OS X
1.) Macs OS X also has built-in drivers to support the KanguruMega Mouse. Simply
plug the KanguruMega Mouse into a USB port, and your Mac OS will
automatically install the driver and an icon will show up on your desktop if a flash
card is inserted into the mouse.
Note: To properly remove the flash card from your Mac OS X, simply drag the drive
icon to the trash to eject the drive. Improper removal/insertion of flash drives may cause
your system to freeze or result in a loss of data.
4. Installation Procedure: SD-MMC-MS
Note: After the installation has finished your PC will create two drives in “My
Computer.” The flash memory card can then be accessed by opening the according drive.
• Windows 98/98SE
1.) Please install the required drivers before attaching the device to your computer.
2.) Insert the Kanguru Master Drivers CD into your CD-ROM drive and open the
KanguruMega Mouse folder. Next open the SD-MMC-MS folder found under
the Drivers folder.
3.) Open the Windows 98 folder and double-click the 98SETUP.EXE program to
install the required drivers.
4.) An installation wizard will guide you through the installation process.
5.) Once the installation wizard has finished, simply plug the KanguruMega Mouse
into an available USB port to begin use.
• Windows 2000
1.) Please install the required drivers before attaching the device to your computer.
2.) Insert the Kanguru Master Drivers CD into your CD-ROM drive and open the
KanguruMega Mouse folder. Next open the SD-MMC-MS folder found under
the Drivers folder.

3.) Open the Windows 2000 folder and double-click the 2KSETUP.MSI program to
install the required drivers.
4.) An installation wizard will guide you through the installation process.
5.) Once the installation wizard has finished, simply plug the KanguruMega Mouse
into an available USB port to begin use.
• Windows ME/XP
1.) There are no drivers required for Windows ME and XP. These operating systems
provide the required card reader drivers.
• Macintosh OS X
1.) Macs OS X also has built-in drivers to support the KanguruMega Mouse. Simply
plug the KanguruMega Mouse into a USB port, and your Mac OS will
automatically install the driver and an icon will show up on your desktop if a flash
card is inserted into the mouse.
Note: To properly remove the flash card from your Mac OS X, simply drag the drive
icon to the trash to eject the drive. Improper removal/insertion of flash drives may cause
your system to freeze or result in a loss of data.
5. Troubleshooting
If you are only seeing one removable disk icon in “My
Computer” please try the following:
For the SD-MMC-SM model:
1. Right click on the My Computer icon, and scroll down to properties.
2. Open Device Manager, and scroll down to USB controllers
3. You should find a USB Mass Storage Device listed.
4. Double click USB Mass Storage Device, and select the Driver tab.
5. Select Update Driver, and a click Next.
6. Select “search for a suitable driver for my device (recommended)”, and click
next.
7. Make sure all of the optional search location boxes are unchecked, and click next.
8. Windows should find a driver called oem19.inf. This is the driver you are looking
for.

9. Click next and Windows will update the driver.
For the CF-SM-MD model:
10. Right click on the My Computer icon, and scroll down to properties.
11. Open Device Manager, and scroll down to USB controllers
12. The correct driver for this device is called CF/SM/MD Reader. If you see this
under USB Controllers you have the correct drivers installed.
13. If you should find a USB Mass Storage Device listed you will need to select the
correct driver.
14. Double click USB Mass Storage Device, and select the Driver tab.
15. Select Update Driver, and a click next.
16. Select “search for a suitable driver for my device (recommended)”, and click
next.
17. Make sure all of the optional search location boxes are unchecked, and click next.
18. Windows should find a driver called usbsnx2k.inf. This is the driver you are
looking for.
19. Click next and Windows will update the driver.
Tech Support
If you experience any problems installing your KanguruMega Mouse or have any technical
questions regarding any of our products, please call our tech support department. Our tech
support is free and available Monday through Friday, 9am to 5pm EST.
Call 1-508-663-0105 or
Visit our website at www.KanguruSolutions.com