Kargo Master 40070 User manual

40070
Installation Instructions

Installation Instructions – 40070
*PLEASE READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO ASSEMBLING,
INSTALLING, AND USING THIS PRODUCT*
Warning
Always check for wires, fuel tanks and lines, brake lines and other important vehicle
functionality items prior to drilling and installing all products.
Tools Needed
Phillips Driver
1/4” Drill (optional)
Before You Begin
•Read all instructions.
•ENSURE SAFETY PRIOR TO DRILLING.

Installation Instructions – 40070
Parts
Hardware

Installation Instructions – 40070
Step 1 – Find Location
•Find desired location for drawer unit to be installed.
•Slots can be found along the shelf of most
KargoMaster shelf units.One can make use of these.
•If desired, place drawer unit (A) in any desired
location, mark holes and drill with 1/4" drill.
Step 2 – Attach
•Bolt drawer unit to shelf using a No10 x 5/8” round heads (1), No10 split lock washers (2) and
a No10 flat washers (3).

Installation Instructions – 40070
Drawer units may be installed in a variety of different
locations. Some examples are shown below.
Ensure all bolts are tight. Your Installation is now complete.
Check out a selection of commercial van equipment in our online store.