KAT VR PiSystem Quick start guide

KAT PiSystem Adapter Owner’s Manual, please visit: http://katvr.com/support_mini.html 1
KAT PiSystem Adapter Installation & First Use Instructions Please turn back for the First Use Instructions.
Installation Instructions
Locate the mini USB cable (PS4
connecting cable) labeled with the
sticker “1” to connect the USB port as
shown in the picture.
Locate the micro USB cable
(controller cable) labeled with the
sticker “2” to connect the USB port
as shown in the picture.
Take out a KAT PiSystem Adapter
and three cables.
21
01
1
1
02
2
2
03
Locate the power cord labeled with
“switch” sticker and connect it to the
power interface shown in the picture.
complete the connection as shown
in the picture.
Locate and connect the USB cable
to the base of KAT Walk mini as
shown in the picture.
06
2
1
07
05
3
And then connect the same micro
USB label to Dualshock 4 controller.
04

Controller connected.
Who is using this controller？
Enter Options Menu
User1
New User User1 User1
KAT PiSystem Adapter Owner’s Manual, please visit: http://katvr.com/support_mini.html
Please turn back for the Installation Instructions.
KAT PiSystem Adapter Installation & First Use Instructions
2
First Use Instructions
Wait for one minute or two for the
KAT PiSystem Adapter to start.
Before connecting the controller, make
sure that the tower and the screen are
both in operation and then press the PS
button on Dualshock 4.
After pressing the button, the
screen will show the above picture
to indicate the success of adaption.
To initialize the KAT Walk mini, manually
rotate the supporting rods for one round
to complete the process, make sure there
is nothing on the base plate.
01 02 03
1-2 min
Before start playing a VR game that requires
controllers, please make sure all cables are
well connected and organized at all times
during playing. You may follow the same
way of connecting the headset cable to deal
with the controller cable connected with
KAT Walk mini via the adapter.
2
1
And go back to STEP 5 for re-adaptation.If adaption fails, unplug the cable of
VR peripheral device, wait for five
seconds.
04
If any controller or headset cable is
twisted and twined before use, please
manually unloose it, damage may be
caused due to continuous twining.