Kayak Innovations NATSEQ Packer User manual

DE - 1
• If possible, always mount/dismount modules at or in the water
• Put behind the Solo Cockpit
Important advice for the usage of NATSEQ Packer
• Always use the rudder system if possible (extension lines included in the scope of delivery)
• Ensure sufficient payload so that the skeg is completely in the water
• Avoid carrying over in assembled condition
• Usage of a kayak trolley:
- Solo version: follow instructions in the kayak manual
- Tandem version: use only in two-part condition

DE - 2
(A+C) Guide the control lines - as well the extensions - through the line connectors on the left
and right and tighten using a loop
(B) Put the lines on both sides around the deck fittings
(D) Feed the end-ball through the loop of the extension of the pulley rope
Steering System for NATSEQ Solo and Packer - Additional assembly instructions
A B C D