KCT DSP-40 User manual
Perfect Safety! Easy Operation! Low Price!
Stand-alone Quad DVR
DSP
-40
User’s Manual
KoreaComputerTechnologiesco.,ltd.
1) This Manual is made for user of DSP-40.
2) This Manual includes features, handling method and setup of DSP-40.
3) This Manual must be read before using DSP-40.
4) If you have any question or have any difficulty in using, please contact your agency.
Korea Computer Technologies, CO., LTD
KCT B/D, 111-3, YANGJAE-DONG, SECHO-GU, SEOUL, KOREA
(Tel) +82-2-575-2331 (FAX) +82-2-575-5450 http://www.kct21.com
0. Warning ··························································································2
1. Introduction·····················································································3
■Features ········································································································ 3
■Mainly Functions ··························································································· 4
■Names of each parts ····················································································· 5
2. Installation ······················································································7
3. Using Method ··············································································· 11
■Booting ········································································································ 11
■Bypass········································································································· 12
■Recording ···································································································· 17
■Replay ········································································································· 20
4. SETUP ·························································································23
■Configuration SYSTEM ··············································································· 26
■Configuration CAMERA ·············································································· 34
■Configuration RECORD ·············································································· 36
■OUTLINE of Setup items············································································· 40
5. Network ························································································41
■‘DVR ETHERNET’ program for LAN ··························································· 42
■‘DVR DIALUP’ program for serial port, modem ·········································· 47
■‘DVR CONFIRM’ program for verify captured image ·································· 51
6. Specifications ···············································································53
7. Recording Table············································································54
8. APPENDIX ···················································································55
■SELECTION OF NTSC/PAL········································································ 55
■Installation of additional HDD······································································ 56
■Pan/Tilt, Zoom, Focus ················································································· 58
■Many DVR connected to One IP ································································· 60
9. Troubleshooting ············································································62
CONTENTS
2
DSP-40
WA R N I N G
Thank you for choosing DSP-40. Before installation and use, please read and
understand following instructions for your safety.
Please install the product only after finding a suitable installment place.
z
Please install on a flat surface.
z
Please install in place with good ventilation
Do not install in the following place
z
Sensitive to the vibration
z
Exposed to direct light
z
Heavy moisture
Please do not put heavy materials on the equipment being installed.
Please refer to the manual before using the recorder.
Remember that the power cord may cause electric shock.
z
Please do not pull the power cord out of the electric outlet.
z
Please do not take out with wet hands.
z
The plug should be placed on safe places.
Do not open the recorder.
z
It is very dangerous to touch the internal parts of the product.
z
Please contact the accredited shops that sell the product for repairs.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
3
Korea Computer Technologies, co., ltd
1. Introduction
Introduction
1. Features
1)
This system is developed the first of the world that can record 4-channel at the
same time, and display moving-image in quad screen.
2)
Each channel can be displayed up to 30fps, and maximum 120fps totally.
3)
Using Wavelet algorithm, this system realizes compression/extraction in high
resolution.
4)
This system is NON-PC, Self-OS, Stand-alone type
PC, so
9
offers easy installation and using method to user,
9
and makes no trouble, i.e., breakdown or system down that PC-based
surveillance system often makes.
4
DSP-40
2. Mainly Functions
■various bypass display (realtime quad, single sequential, auto switching, freezing)
■
4 channel recording at the same time.
Recording max 120fps totally
■Various recording method by record button, reservation, sensor, motion detection
■Fast and easy search for recording data
■320X240 resolution, true color recording
■Warning through Buzzer or Digital output in sensor detection
■
transmission, printing, and capture image with RS232C, MODEM and LAN
■4 digital input / 1 digital out
■Max 4 HDD
■NTSC/PAL camera, monitor
■PAN/TILT, Zoom, Focus camera support
■Camera signal loss detection
5
Korea Computer Technologies, co., ltd
1. Introduction
3. Names of each parts
The Front side
Run Indicator
Green light twinkling when power on
Power Switch
Power On / Off
FREEZE
Freeze displaying screen
AUTO
Auto switching / Auto switching stop
ENTER
Enter SETUP mode or select item
Rec
Recording / Recording stop
PREV
Search by 1frame rewind
QUAD
Display quad screen
at the same time
DISPLAY
Display single screen by
each button
ZOOM
Zoom the specific area in
the screen
Direction
Move cursor up/down/left/right
ESC
Cancel selection or return
to previous item
REW
Search by fast rewind
Play
Replay / Pause
Sto
p
Stop Replay.
FF
Search by fast
forward
NEXT
Search by 1 frame
forward
6
DSP-40
Camera input
Monitor input
LAN port
Sensor in/out
Lan led
The Rear side
Connect camera cable
Connect monitor cable
Connect sensor and digital out
Connect Lan cable
Emit light when lan
connection and working
Sensor led
Emit light when sensor in
RS232C port
Connect RS232C cable
AC Power
Connect power cable
7
Korea Computer Technologies, co., ltd
2. Installation
Installation
1. Contents of product
1) Main system (Embedded HDD, optional max 4EA)
2) Power cable
3) User’s manual, host program CD 1EA
- If you have shortage or defects of parts, please contact your agency.
2. Step of Installation
The Rear Side
1) Camera Input
2) Monitor Output
4) RS232C port 5) LAN port
3) Sensor IN / OUT
6) AC Power
8
DSP-40
1) Camera connection
Connect camera to CAMERA INPUT of backward of system.
2) Monitor connection
Connect monitor to MONITOR OUTPUT of backward of system.
3) Sensor connection (optional)
Connect sensor to SENSOR IN of backward of system.
4) Network connection (optional)
Construct RS232C, Modem and LAN connection referring to below network connection diagram.
5) Power connection
Connect power cable to power connection of backward of system, and turn on the power switch
of forward of system.
3. Network connection and serial cable connection
1) RS232C serial connection
2
3
5
9pin
2
3
5
9pin
Female
Female
Rx
Tx
Gnd
Rx
Tx
Gnd
RS232C
9
Korea Computer Technologies, co., ltd
2. Installation
2) Modem(PSTN) connection
3) LAN connection
※Use cross cable when direct connection between PC and DVR using LAN cable.
2
3
7
25pin
2
3
5
9pin
Female
Male
4
5
6
8
20
Rx
Tx
Gnd
Rx
Tx
Gnd
TEL. line
External Modem
PSTN
RS232C
TEL. line
LAN
10
DSP-40
4. After installation
1) Bypass, recording, replay, sensor test
Confirm if bypass screen is displayed well. Then record and replay some data referring to in this
manual. And confirm if sensor record is possible by making any event. If any problem, contact
your agency.
2) RS232C, Modem (PSTN), LAN connection test
Confirm if network print function is possible connecting the system to host computer. If any
problem, contact your agency.
11
Korea Computer Technologies, co., ltd
3. Using Method - Booting
Using Method
Booting
1) When system is booting, the follow screen is displayed.
2) The “OK” means process success, and ‘FAIL’ means process failure.
3) If one of items(except LAN and VERSION) is FAIL, system reboot.
4) When all is OK, booting status screen is disappeared and quad bypass screen is
displayed..
VIDEO INITIALIZE NTSC
QUAD INITIALIZE OK
ENCODER INITIALIZE OK
DECODER INITIALIZE OK
RTC INITIALIZE OK
VOICE INITIALIZE OK
LAN INITIALIZE NONE
SYSTEM BIOS VERSION
20011008-20010928
STARTING SYSTEM…
PLEASE WAIT
12
DSP-40
▶
User can display camera input to screen immediately, and can select 1-screen mode or
split-screen mode.
▶
Auto Switch, Freeze, Zoom mode available
▶
Current time, camera name, and system status (i.e., Recording, Zoom, Freeze,
Sensor) is displayed into screen.
▶
User can change from bypass status to setup mode and replay mode.
▶
Recording can be started or finished in the middle of bypass mode. If motion detection
function is valid, blue recording icon is displayed. Refer to motion detection setup item in
the SETUP mode in this manual.
▶
Icon list
: Recording(RED) : Motion Detect
(BLUE)
: ZOOM
: Freeze : Sensor : Switching
Bypass
Principle of operation method
13
Korea Computer Technologies, co., ltd
3. Using Method - Bypass
CAMERA 1 CAMERA 2
CAMERA 4
CAMERA 3
2001. 08. 01. 12:34:56
1. Quad Screen
- If user press QUAD button in bypass status, the button emits light and quad screen is
displayed.
ZOOM Display zoom in/out status
Recording
On/Off
Display recording on/off
(blue means motion detect ready)
Camera name
Display camera name installed
each channel.
Current time
Display current time
Sensor In/Out
Display sensor status
FREEZE
Display freeze status
HDD-Status bar Display used quantity of HDD
14
DSP-40
2. 1-Channel Screen
- If user press camera button in bypass status, not in zoom or freeze mode,
1-channel screen is displayed.
CAMERA 1
2000. 01. 01. 12:34:56
ZOOM Display zoom status
Recording
On/Off
Display Recording status
(blue means motion detect ready)
Camera Name
Display camera name
installed each channel
Current time
Display current time
Sensor In/Out
Display Sensor
status
FREEZE Display freeze on/off
SWITCHING
Display
switching on/off
15
Korea Computer Technologies, co., ltd
3. Using Method - Bypass
3. Operation Method
AUTO FREEZE QUAD DISPLAY ZOOM ENTER ESC
▶Screen Auto Switching (1-Channel screen mode only)
1) If user press AUTO button in 1-channel screen mode, the screen is auto switched
according to switching gap of configuration in SETUP mode. (referring to p35.)
(If user press AUTO button in quad screen mode, the screen mode is changed to 1-
channel mode and the screen is auto switched.)
2) In auto switching status, AUTO button emits light and auto switching icon is displayed.
3) In auto switching status, if user press AUTO button again, go back 1-channel screen.
▶FREEZE : display freeze-frame
1) In 1-channel screen mode, if user press FREEZE button, the screen displays freeze-frame.
And if it is auto switching mode, auto switching stop immediately,(If freeze screen mode is
deactivate, auto switching restarts,) In Freeze mode, the FREEZE button emits light and
Freeze-icon is displayed in the screen.
2) In quad screen mode, if user press FREEZE button, the FREEZE button emits light. Then,
pressing each camera button,
the camera button emits light and freeze-icon is displayed with
freeze-frame
.
3) If user press freezed camera button or freeze button again, FREEZE mode is finished.
Auto Switching Freezing screen
Quad screen
Each Camera
Zoom Screen Direction
Enter / Setup
Cancel
16
DSP-40
▶zoom : selected area is zoomed (Quad screen mode only)
1)
If user press zoom button, the button emits light and zoom area selection rectangle is displayed.
2)
Using direction key, move zoom area.
3)
Pressing enter key, selected area is zoomed and zoom-icon is displayed in up-left of each
screen.
4)
Using direction key, user can move select rectangle at the zoom-in status.
5)
Pressing Esc, go back previous status.
▶HDD-Status Bar : Display used quantity of HDD
1) Red means used quantity and white means unused quantity.
2) The HDD-status bar is displayed as the number of HDD. Each HDD-status bar indicates
quantity of each HDD. If HDD is not installed or not formatted, HDD-status bar is not displayed.
3) When ‘Auto delete’ is activated, recording is possible even though HDD is full.
Then, HDD-status bar is displayed red entirely, only recording location of HDD is
marked white.
4) The HDD-status bar is not displayed In AUTO SWITCHING / FREEZE / ZOOM /
PTZ mode.
5) ‘Esc’ + ‘UP arrow’ : Display HDD-status bar
‘ESC’ + ‘DOWN arrow’ : Do not display HDD-status bar
▶Adjusting BRIGHT and CONTRAST of the Each Channel
1) Just touch ESC + DISPLAY n (n=1,2,3,4) then you can find the follow box which show BRIGHT
and CONTRAST of selected Channel.
2) Using UP/DOWN direction key for adjusting BRIGHT, and Using LEFT/RIGHT direction key for
adjusting CONTRAST.
3) Using ZOOM key for default value(BRIGHT=128, CONTRAST=216).
4) Using ESC key for exit.
CAMERA 1
BRIGHT 128
CONTRAST 216
17
Korea Computer Technologies, co., ltd
3. Using Method - Recording
▶
Recording method includes 1) button recording by user, 2) reserved recording by
configured schedule, 3) recording by event of sensor.
▶
If motion detection function is valid, blue recording icon is displayed. If motion detection
event occurs, blue changes to red. User can set up if motion detection is valid or not in the
setup mode. Refer to appropriate part of this manual.(p37)
▶
If you change recording setup value in setup mode, you must finish record by record
button, and restart record by record button.
Recording
Principle of operation method
18
DSP-40
1. Recording by Button
1)
If user press recording button, the button emits light, recording icon is displayed, and recording
starts immediately.
2)
Recording by button can be started in any status(bypass, replay and setup mode), but not in
password input screen.
3)
Pressing recording button again in recording mode, recording finishes and the button light is
disabled and displayed icon is erased.
2. Reserved Recording
1) According to day of the week : by setting specific time range
▶
User can set enable reserved recording function on not each weekday (from Monday to
Friday), Saturday, Sunday.
▶
User can set start time and end time of recording by hour and minute unit.
▶
Refer to appropriate part of this manual.(p38)
2) According to specific day : by setting specific time range
▶
Max 8 time-range can be set.
▶
User can set start time and end time of recording by month, day, hour and minute unit.
▶
Refer to appropriate part of this manual.(p38)
3. Recording by Event of Sensor
1)
If event of sensor arises, recording starts in the channel connected that sensor.
2)
Recording keeps up until the time set in setup mode, RECORD
→
SENSOR TIMEOUT
item.
(p38)
3) With event of sensor, the sensor-icon is displayed in the screen connected sensor
Table of contents
