Keating Of Chicago Miraclean 2000 User manual

1-800-KEATING
www.keatingofchicago.com
Users Manual
MIRACLEAN®ELECTRIC GRIDDLE
SERIES 2000
READ AND SAVE THIS MANUAL FOR FUTURE REFERENCE.
Keep this manual for training new personnel.
GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
STANDARD FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
MODEL VARIATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
DAMAGE DURING SHIPMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
POSITIONING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
LEVELING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
RESTRAINING DEVICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
ELECTRICAL CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
WIRE SIZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
CONDITIONING THE GRIDDLE . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
COOKING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-4
CLEANING THE GRIDDLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
SHUTDOWN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
WARRANTY REPAIRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
PREVENTIVE MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . .5
GRIDDLE SURFACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
LIMITED CALIBRATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
TROUBLE SHOOTING CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
ORDERING PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
WARNING AND OPERATING PLATES . . . . . . . . . . . . . . . . . . . . . . .8
MIRACLEAN® ELECTRIC GRIDDLE PARTS LIST . . . . . . . . . . .8-9
HEATING ELEMENT ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . .9
STAND ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
WIRING DIAGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-13
24” DEEP MODELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
30” DEEP MODELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
36” DEEP MODELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
CONTENTS:
IMPORTANT: Keep a copy of your bill of sale. The date on the bill establishes the warranty period should
service be required. If service is performed, it is in your interest to obtain and keep all receipts. Keating
commercial griddles are not intended for household use.
The Owner’s Guide provides specific operating instructions for your model. Use the Miraclean®Electric
Electric Griddle only as instructed in this Owner’s Guide.
electricGriddle2000
0/11
part# 037401
RECORD THE MODEL AND SERIAL
NUMBERS OF THIS MIRACLEAN®ELECTRIC
GRIDDLE IN THE SPACES PROVIDED.
SERIAL NO. ______________________________
MODEL NO. _____________________________
KEEP THESE NUMBERS FOR FUTURE REFERENCE.
*AS CONTINUOUS PRODUCT IMPROVEMENT OCCURS, SPECIFICATIONS MAY BE CHANGED WITHOUT NOTICE.

i
POST THIS LABEL IN A
PROMINENT LOCATION ON
YOUR UNIT.
WARNING
Do not store flammable
liquids near this or any
other appliance.
DO NOT STORE OR USE GASOLINE
OR OTHER FLAMMABLE VAPORS
OR LIQUIDS IN THE VICINITY OF THIS
OR ANY OTHER APPLIANCE.
IMPROPER INSTALLATION,
ADJUSTMENT, ALTERATION,
SERVICE OR MAINTENANCE CAN
CAUSE PROPERTY DAMAGE,
INJURY OR DEATH. READ THE
INSTALLATION, OPERATING AND
MAINTENANCE INSTRUCTIONS
THOROUGHLY BEFORE INSTALLING
OR SERVICING THIS EQUIPMENT.
WARNING
Improper installation
can cause damage,
injury or death.
ShockBurnsGas

1
INTRODUCTION
GENERAL
Keating MIRACLEAN®Electric Griddles are designed
to give maximum production efficiency, delivering high
quality food products. The following design features are
incorporated into Keating MIRACLEAN®Electric
Griddles.
STANDARD
FEATURES
MIRACLEAN®energy efficient plate
Welded stainless steel perimeter
Welded stainless steel grease trough
Baffle grease drawer with rear handle
Stainless steel control panel
STANDARD
ACCESSORIES
Keating griddle scraper
Package of 10 scraper blades
Palmetto brush
4” special Keating spatula
Keating egg turner
Keating Klenzer sample
OPTIONS
380 or 480 volt input
Single phase input
High input heating elements
MODEL VARIATION
Standard Griddles: Keating MIRACLEAN®electric
griddles are available in widths ranging from 24” to
72” and in 24”, 30” and 36” depths. The electric
griddles are ETL listed.
SAFETY PRECAUTIONS
THIS SYMBOL WARNS YOU THAT SERIOUS BURNS
OR OTHER INJURIES MAY RESULT IF SAFETY
INSTRUCTIONS ARE NOT FOLLOWED.
This service manual should be retained in a safe
place for future reference.
The installation of your new griddle must conform to
local codes or in the absence of local codes, with the
current National Electrical Code ANSI/NFPA 70 or
Canadian Electrical Code CAN 22.2 as applicable.
Your ventilation hood, when installed, must conform
to the current ANSI/NFPA 96 standard.
Installation clearance requires 6” from rear and side
walls.
You must maintain this appliance free and clear from
combustibles.
Adequate clearance for servicing and proper
operation must be maintained.
Your Keating MIRACLEAN®is designed to be
serviced form the front, except for the rear field wire
connections (electric input).
Keating commercial griddles are intended for other
than household use.
ALWAYS instruct new employees on proper griddle
operation.
A MIRACLEAN®griddle should be operated ONLY
by properly trained personnel.
ALWAYS turn griddle off each night.
ALWAYS disconnect electrical supply before
servicing.
NEVER leave a griddle unattended during operation.
NEVER move griddle when hot.
THIS GRIDDLE MAY NOT BE
ALTERED, MODIFIED OR
CHANGED IN ANYWAY.
Safe operation of this equipment is
possible only when the operating
instructions and the safety
precautions are read completely
and the instructions contained
therein are strictly observed. Before
operating this equipment, ask for a
practical demonstration.
Periodically inspect cable and plug,
if provided, before using machine.
Servicing should be performed by
qualified and licensed service
companies.
CAUTION
Read all operating and
safety instructions
before using equipment.
WARNING
Plug into a
properly grounded
three-prong receptacle.

2
II INSTALLATION
This unit must be installed, inspected, calibrated and
serviced by qualified and/or certified and licensed
service personnel - you may void your Keating
warranty if installation is not completed per local,
national and Keating specifications. Contact your
dealer for assistance.
INSTALLATION
Installation must conform with local codes or, in
absence of local codes, with the current National
Electrical Code ANSI/NFPA 70 or Canadian Electrical
Code CAN22.2 as applicable.
DAMAGE DURING
SHIPMENT
The griddle has been assembled, tested and inspected
at the factory. Upon arrival, the complete griddle should
be checked for any damage that may have occurred
during shipment.
The carrier is responsible for all damage in transit
whether visible or concealed. Do not pay the freight bill
until the griddle has been thoroughly checked for
damage. If concealed damage is found later, contact
the carrier immediately to file a claim.
What to do if equipment arrives damaged:
VISIBLE LOSS OR DAMAGE -- Be certain to note this
on the freight or express receipt and have it signed by
the delivery person.
FILE CLAIM FOR DAMAGES IMMEDIATELY --
Regardless of extent of damage.
CONCEALED LOSS OR DAMAGE -- If damage is
noticed when equipment is unpacked, notify the freight
company immediately, and file a “concealed damage
claim”. This MUST be done immediately. Be sure to
retain the shipping container for inspection.
Keating does not assume responsibility for Loss or
Damage incurred in transit.
POSITIONING
The griddle must be placed under an exhaust hood
with a fire retardant system. Your ventilation hood,
when installed, must conform to the current
ANSI/NFPA 96 standard. ALL connections and
placement must comply with local and national codes.
It is the responsibility of the owner and local installer to
comply with these regulations when installing the
griddle.
NOTE: NOT FOR OUTDOOR INSTALLATION
LEVELING
Your MIRACLEAN®Griddle will operate at its highest
efficiency when properly leveled. Place a level on the
griddle plate from side to side. For griddles on legs, the
bottom foot of the leg is adjustable. Turn clockwise to
decrease height or counterclockwise to increase height
until level. For griddles on stands with casters, the
casters are adjustable by loosening the jam nut and
turning the caster in or out. When the desired level is
reached, tighten the jam nut. Adjustments of more than
3/4” are not recommended on any caster. The same
procedure should be followed to the level the griddle
from front to back.
Figure 2-1
Leveling Griddle
RESTRAINING
for griddle installations on stands with casters, casters
and jam nuts must be completely tightened. Adequate
means must also be provided to limit the movement of
the appliance.
The restraint must be attached to the rear of the griddle
as close as possible to the center line width and the
bottom of the cabinet back to allow the restraining bolt
to be anchored to the cabinet back between the cabinet
bottom and inner liner to ensure positive support to
restrain griddle movement.
IF DISCONNECTION OF THE
RESTRAINT IS NECESSARY, IT
MUST BE RECONNECTED WHEN
THE MIRACLEAN® GRIDDLE IS
RETURNED TO ITS ORIGINALLY
INSTALLED POSITION.
ELECTRICAL
CONNECTION
The Keating Electric MIRACLEAN®Griddle is equipped
with a three wire terminal block for customer
connections. Compare the griddle terminal connections
to the appropriate wiring diagram for the griddle (see
WARNING
Do not stand, sit or
lean on equipment.

3
pages 11 - 12 Wiring Diagram) to see if the griddle is
connected three phase or single phase. All wires,
cords, plugs, receptacles and circuit breakers must be
sized adequately for the full load rating of the griddle as
specified by local codes or, in the absence of local
codes, by the current National Electrical Code
ANSI/NFPA 70 or the Canadian Electrical Code CAN
22.2 as applicable.
The Electric MIRACLEAN®Griddle is also equipped
with a grounding lug next to the terminal block. For
proper grounding procedures, see local codes or, in the
absence of local codes, the current National Electrical
Code ANSI/NFPA 70 or the Canadian Electrical Code
CAN 22.2 as applicable.
NOTE: The connections to the griddle can be changed
in the field from three phase to single phase or from
single phase to three phase. This can be done by
simply changing the wiring at the terminal block. To
change the connections for your griddle, see the wiring
diagram for your griddle on pages 11 - 12.
NOTE: For griddles rated at 208-240 volts, the
amperage ratings marked on the nameplates of the
griddles are listed at 240 volts as required by UL. If
your griddle uses a 208 or 220 volt system, refer to the
Electric Griddle Specifications on pages 14 to 16 to
determine the full load rating of the griddle.
NOTE: A hole has been punched in the rear of the
griddle cabinet for a cord or conduit exit. If a cord is
used, the National Electrical Code, UL standards and
most local codes require a bushing or strain relief (not
provided by Keating) to protect the cord.
WIRE SIZE
Use the table below to help determine the proper wire
size for electrical service hook-up. Use the largest amp
value of the three conductors for 3-phase installations
when using the table. The amperage values for a
product can be found on its serial number tag. Consult
the National Electrical Code Handbook for additional
information or to help answer questions about wire size
selection.
*For runs greater than 75' up to 125', use the next wire
size larger to keep the voltage drop to less than 3%.
For runs greater than 125', consult the National
Electrical Code Handbook to help determine the proper
wire size.
**2/0 wire ambient temperature must be kept at less
than 104°F (40°C).
III OPERATING
CONDITIONING THE
GRIDDLE
The MIRACLEAN®Griddle plate has been “seasoned”
at the factory. The chrome surface when heated
creates a thin layer of chrome oxide which acts as a
releasing agent for food products. If you feel you need
to recondition the surface, the following instructions
should be followed:
1. Follow cleaning instructions on page 5.
2. Heat the MIRACLEAN®to 400°F for one hour.
3. Lower thermostat to 350°F, allowing the
MIRACLEAN®to cool to about 350°F, as is evident
when griddle cycles on or surface thermometer
indicates correct temperature.
4. Lightly coat the MIRACLEAN®surface with griddle
oil.
NOTE: Despite the food releasing properties, the
chrome surface is not a true “non-stick” surface. For
best cooking results and product appearance, use
griddle oil for products that require the surface to be
conditioned.
COOKING
Keating MIRACLEAN®Griddles are designed to
provide maximum production efficiency and deliver
high quality food products. Follow cooking procedures
below.
1. For 208-240 Volt Unit: Set ON/OFF switch to “ON”
position. The Power indicating light will illuminate.
For 480 Volt Unit: Rotate thermostat knob from
“OFF” position to desired temperature. The power
indicating light will illuminate.
2. Set the thermostat to the desired temperature and
wait approximately ten minutes for preheating.
Recommended cooking temperatures for various
food products are as follows:
Conductor
Current (Amps up to)
Recommended
wire size (AWG)
15 14*
20 12*
30 10*
40 8
55 6
70 4
95 2
125 0
145 2/0
165 2/0**
190 2/0**

4
NOTE: Because of the superior heating characteristics
and heat retention properties found in the
MIRACLEAN®Griddle, operating temperatures should
be set 10°F to 25°F below conventional griddles.
3. Locate the inverted “V’s” on the front of the griddle
cooking plate. Depending on your model you may
have from one to six thermostats. The “V’s”
indicate where the thermostat sensing bulbs are
located below the plate.
4. Load the product to the left and right of each
inverted “V” first, then fill the area above the
thermostat sensing bulb. See figure 3-1 below.
Figure 3-1
Sample configuration of proper food placement
If you cook over the sensing bulb only, you are drawing
heat from that section, activating the thermostat to call
for more heat even though the area around it is still at
the temperature setting. This will result in higher
surface temperatures which will affect your cooking
and product appearance.
Figure 3-2
Top view placement of elements under MIRACLEAN plate.
5. After each load, scrape the griddle surface
completely clean using the 4” wide replaceable
blade scraper.
NOTE: DO NOT HACK, CHOP, HIT OR CUT ON THE
MIRACLEAN® SURFACE. You will dent the steel plate
under the trivalent chrome. It is even possible to hack
two nicks close together and actually tear the
MIRACLEAN®surface as the chromium will not stretch.
Below is a sketch showing the side view of a griddle
plate and how the surface can be damaged. Proper
use of the utensils supplied with your MIRACLEAN
Griddle will prevent surface damage.
Figure 3-3
Surface Damage
NOTE: Damage done to the MIRACLEAN®surface is
irreparable and is not covered under Keating Warranty.
Load #1 Load #3 Load #2
➌➌➒➒➏➏
➋➋➑➑➎➎
➊➊➐➐➍➍
“Λ”
Thermostat Bulb Location
RECOMMENDED COOKING TEMPERATURES
PRODUCT °F
Eggs 250°F
Bacon 325°F
Sausage (patty or link) 325°F
Hash Browns 350°F
French Toast 350°F
Wheat Cakes 360°F
Hamburgers – 2/lb. (8oz.)
4/lb. (4 oz)
10/lb. (1.6oz)
325°F
315°F
310°F
Grilled Cheese 325°F
Chicken Breasts (skinless) 350°F
Hot Dogs – 45g each
57g each
310°F
310°F
Salmon Filet 325°F
Salmon Steaks 325°F
Buns/Breads (toasting)
30 seconds max. 375°F

5
CLEANING THE
GRIDDLE
The surface of the MIRACLEAN®Griddle is very
durable and with proper care, following the procedures
below, will last many years.
A sample of Keating Klenzer, Keating palmetto brush
and a 4” scraper are included with each new griddle.
1. Scrape MIRACLEAN®surface with the Keating
Scraper.
2. Clean with potable tap water and a Keating
palmetto brush.
3. Polish surface with Keating Klenzer. Rinse with
potable water to remove excess Keating Klenzer.
NOTE: BECAUSE OF THE SUPERIOR
MIRACLEAN® SURFACE, THE ONLY TOOLS YOU
WILL EVER NEED TO CLEAN THE GRIDDLE ARE A
NATURAL BRISTLE BRUSH AND A KEATING
SCRAPER.
NEVER USE A GRIDDLE STONE, BRICK OR
SCREEN TO CLEAN THE MIRACLEAN®
SURFACE.
DAMAGE DONE TO THE MIRACLEAN®
SURFACE BY GRIDDLE STONE, BRICK OR
SCREEN WILL VOID THE WARRANTY.
THE DAMAGE DONE TO THE MIRACLEAN®
SURFACE IS IRREPARABLE.
NEVER USE ICE TO COOL THE MIRACLEAN®
SURFACE. USE OF ICE MAY WARP THE
MIRACLEAN® SURFACE.
USE ONLY KEATING SUPPLIED CLEANING
TOOLS AND KLENZER.
USE ONLY KEATING SPATULAS.
NOTE: Keating Klenzer MSDS Sheet is available
on-line.
SHUTDOWN
1. For 208 - 240 Volt Unit: Turn each thermostat fully
counterclockwise and On/Off switch to “OFF”
position.
For 480 Volt Unit: Turn thermostat knob to “OFF”
position.
IV MAINTENANCE
WARRANTY REPAIRS
Keating’s warranty begins with the date of installation.
In the event that your MIRACLEAN®Electric Griddle,
under warranty, needs repairs other than routine
maintenance or cleaning, you are required to contact
Keating of Chicago (at 1-800-KEATING) before calling
a local service company.
PREVENTIVE
MAINTENANCE
Preventive maintenance should be done in daily,
weekly, monthly and yearly intervals as necessary.
Following preventive maintenance procedures will help
keep your MIRACLEAN®working efficiently. Proper
care and servicing will lead to years of quality
performance.
PREVENTIVE MAINTENANCE CHART
TIME
FRAME
OPERATOR/
OWNER SECTION
Daily*• Check lights and controls
• Clean griddle surface.
• Drain and clean grease drawer.
• Completely wipe down griddle cabinet.
III
Monthly*• Check condition of MIRACLEAN®
surface and review proper procedures.
• Check calibration of thermostat(s).
• Review installation and operating
instructions received with griddle.
III
IV
II
Yearly*• Have griddle completely checked,
calibrated, tested, cleaned, etc. by
qualified service personnel.
* High production facilities should be checked more often.

6
A. Griddle Surface
With proper care, the MIRACLEAN®surface and its
unique cooking properties will last for many years.
However, nicks or dents in the griddle surface may
cause the griddle surface to lift from the depressed
area. If nicks are close together, the surface may raise
and be torn when a spatula or scraper is used. Care
should be taken, as the damage done is irreparable.
See Figure 3-3 on page 4.
Damage done to the MIRACLEAN®surface is
irreparable and is not covered under Keating Warranty.
B. Limited Calibration for 208-240 Volt Units (Less
than 50°F difference)
You will need: One standard flat blade screwdriver
One accurate griddle thermometer
1. Set thermostat to 300°F.
2. Allow thermostat to cycle three times.
3. Locate inverted “V” on front of griddle plate above
to locate thermostat bulb position. Place
thermometer on plate over bulb half way toward
rear of griddle.
Figure 4-1
Thermostat calibration
4. If calibration of griddle is found to be less than 50°F
off, simply loosen four dial plate retaining screws
(See Figure 4-1), rotate dial plate to match
thermometer reading and tighten screws.
NOTE: Calibration is not covered under warranty.
CLEANING
Proper care should be taken to fully clean the griddle
on a regular basis.
DISCONNECT ELECTRIC POWER
SOURCE BEFORE CLEANING.
A. CONTROL PANEL - Clean
any grease build-up on the switches
and thermostat knobs.
NOTE: If grease gets into the body
of the switch or thermostat, it may
cause it to fail.
IF GREASE GETS INTO THE
BODY OF THE SWITCH OR
THERMOSTAT, IT MAY CAUSE
ELECTRICAL SHOCK.
B. CABINET - The front, back
and sides of the cabinet should be
kept clean for sanitary and safety
reasons.
See page 5 “Cleaning the Griddle”
WARNING
Improper installation
can cause damage,
injury or death.
ShockBurnsGas
WARNING
Disconnect all power
before servicing.

7
V SERVICE DIAGNOSIS
A. Trouble shooting
The following diagnosis is only to be used as a guide to qualified personnel. Keating recommends that you use a
qualified service company. Call 1-800-KEATING if you need assistance in locating a qualified service company.
PROBLEM PROBABLE CAUSE SOLUTION
Griddle won't heat. a No electricity to griddle.
b Griddle circuit breakers (external) have
tripped.
c. On/Off switch is on "OFF" position.
d. Thermostat isn't on.
e. On/Off switch is faulty.
f. Thermostat is faulty.
g. Connections are loose.
h. Element is faulty.
a. Connect griddle to an approved source
of power.
b. Reset circuit breakers (External).
c. Set On/Off switch to 'ON" position.
d. Turn thermostat to desired cooking
temperature.
e. Replace On/Off switch.
f. Replace thermostat.
g. Tighten connections.
h. Replace element
Indicating light does not
illuminate although
element is heating.
a. Indicating light is faulty. a. Replace indicating light
Temperature of griddle
is erratic.
a. Thermostat out of calibration.
b. Thermostat bulb improperly placed.
c. Exhaust problems or drafts in kitchen.
a. Calibrate thermostat. See page 6 –
Calibration.
b. Adjust thermostat bulb.
c. Contact your HVAC representative.
Griddle is overheating. a. Thermostat out of calibration.
b. Thermostat is faulty.
c. Improper exhaust or draft.
a. Calibrate thermostat. See page 6 –
Calibration.
b. Replace thermostat.
c. Contact your HVAC representative.

D 052505 Grease Drawer (Not Shown)
8
VI PARTS LIST
ORDERING PARTS
Parts may be ordered by calling 1-800-KEATING or your local Keating service company. You may also order on-
line at Keating’s part store, www.keatingofchicago.com
Refer to the Keating MIRACLEAN®Electric Griddle Limited Warranty for complete service and ordering
information.
The model/serial plate is located inside of the grease drawer area to the left or on the front of the upper heat shield
above the control panel. The serial and model numbers are necessary when ordering.
WARNING AND OPERATING PLATES
All warning and operating plates on the Keating MIRACLEAN®Electric Griddle should be in place at all times. If plates are
damaged or lost, replace them immediately.
A
B
A
C
B
C
*E
D
Part No. Description
A035954 Thermostat 400°F
029521 Thermostat 550°F
034870 Thermostat Dial Plate 400°F
060105 Thermostat Dial Plate 550°F
004163 Thermostat Knob 400°F
038267 Thermostat Knob 550°F
B050255 Light
C054920 Switch
D052505 Grease Drawer
002457 Grease Drawer for Model 32 A only
*E Not shown on this page. See page 9.
A
B
B
Part No. Description
A037392 Thermostat with Sleeving & Light
037391 Thermostat with Sleeving & Black Knob
002621 Indicating Light White
014983 Thermostat Knob 200°-550°F Black
B052505 Grease Drawer
Part No. Description
A004157 Amber Indicating Light, 220 Volt
B060354 Toggle Switch, 30 Amp 250 Volt
C029521 Thermostat 550°F
060105 Thermostat Dial Plate 550°F
030267 Thermostat Knob 550°F
CONTROL PANEL 208 - 240 VOLT
2011 CONTROL PANEL 208 - 240 VOLT
CONTROL PANEL 480 VOLT
C
O
T
F
A
T
B
I
L
R
A
I
E
S
H
T
250
250
200
200
450
450
350
350
300
300
400
400
500
500
C
O
T
F
A
T
B
I
L
R
A
I
E
S
H
T
250
250
200
200
450
450
350
350
300
300
400
400
500
500
ON
OFF
ON
OFF

9
To replace thermostat:
• Loosen nuts (#7)
• Loosen nuts to Dispersion Plate
(if needed)
• Slide thermostat bulb through
slots pictured in items 2, 3, & 4.
• With bulb tight against the plate,
tighten all nuts.
Figure 6-3
Heating Element Assembly
ITEM DESCRIPTION
PART
NUMBER
QTY 24"
DEEP
QTY 30"
DEEP
QTY 33"
DEEP
1HEATING ELEMENT
2300W, 220V 002478 1
3000W, 220V 002483 1
3750W, 220V 002487 1
3300W,220V (HIGH INPUT, TEPPANYAKI) 002482 1
4370W, 220V (HIGH INPUT) 002480 1
3000W, 440V 013270 1
3750W, 480V 006337 1
3300W, 480V 005567 1
WASHER, FLAT, #10 7/16” OD 059502 2 2 2
WASHER, LCKG INT TOOTH HI-TEMP #10 011562 4 4 4
NUT 10-32 000361 2 2 2
2HEAT DISPERSION PLATE 005913 1
006228 1
006229 1
3INSULATION BOARD 002489 1
002493 1
002490 1
4HEATING ELEMENT PAN 020553 1
020554 1
020556 1
5HEATING ELEMENT BULB
HOLD DOWN "M" BRACKET 008593 1 1 1
6HEATING ELEMENT HOLD DOWN
BRACKET 029352 3 4 5
73/8" NUT, WASHER, LOCK-
WASHER AND PALNUT 028736 8 10 12
NOTE: Quantities shown are for each element. See Specifications on pages 13 to 15 for the number of elements for
your griddle.

10
Assembly instructions for griddle stand on casters
(There is no top on this stand)

11
208 - 240 VOLT WIRING DIAGRAM (3-PHASE CONNECTIONS)

208 - 240 VOLT WIRING DIAGRAM (SINGLE-PHASE CONNECTIONS)
12

13
480 VOLT WIRING DIAGRAM
NOTE: Griddles rated at 480 Volts use type D-1 thermostats which include On/Off switches. Separate On/Off
switches are not provided with these griddles.

14
VIII KEATING GRIDDLE SPECIFICATIONS
24" DEEP MODELS
27x24 30x24 36x24
AMPS
VOLTS kW SINGLE
L1 L2 L3 PHASE
208 4.1 10 17 10 20
220 4.6 11 18 11 21
240 5.5 11 20 11 23
AMPS PER LINE-THREE PHASE
2 ELEMENTS (2300 W EACH)
AMPS
VOLTS kW SINGLE
L1 L2 L3 PHASE
208 6.2 17 17 17 30
220 6.9 18 18 18 31
240 8.2 20 20 20 34
AMPS PER LINE-THREE PHASE
3 ELEMENTS (2300 W EACH)
AMPS
VOLTS kW SINGLE
L1 L2 L3 PHASE
208 10.3 26 34 26 49
220 11.5 28 36 28 52
240 13.7 30 40 30 57
AMPS PER LINE-THREE PHASE
5 ELEMENTS (2300 W EACH)
60x24
AMPS
VOLTS kW SINGLE
L1 L2 L3 PHASE
208 8.2 26 26 17 40
220 9.2 28 28 18 42
240 10.9 30 30 20 46
AMPS PER LINE-THREE PHASE
4 ELEMENTS (2300 W EACH)
42x24 / 48x24
MODELS: STANDARD & FRONT TROUGH ONLY

15
30" DEEP MODELS
AMPS
VOLTS kW SINGLE
L1 L2 L3 PHASE
208 5.4 13 22 13 26
220 6.0 14 24 14 27
240 7.1 15 26 15 30
AMPS PER LINE-THREE PHASE
2 ELEMENTS (3000 W EACH)
AMPS
VOLTS kW SINGLE
L1 L2 L3 PHASE
208 8.0 22 22 22 39
220 9.0 24 24 24 41
240 10.7 26 26 26 45
AMPS PER LINE-THREE PHASE
3 ELEMENTS (3000 W EACH)
AMPS
VOLTS kW SINGLE
L1 L2 L3 PHASE
208 13.4 34 45 34 65
220 15.0 36 47 36 68
240 17.9 39 52 39 74
AMPS PER LINE-THREE PHASE
5 ELEMENTS (3000 W EACH)
60x30
AMPS
VOLTS kW SINGLE
L1 L2 L3 PHASE
208 10.7 34 34 22 52
220 12.0 36 36 24 55
240 14.3 39 39 26 60
AMPS PER LINE-THREE PHASE
4 ELEMENTS (3000 W EACH)
42x30 / 48x30
AMPS
VOLTS kW SINGLE
L1 L2 L3 PHASE
208 16.1 45 45 45 77
220 18.0 47 47 47 82
240 21.4 52 52 52 89
AMPS PER LINE-THREE PHASE
6 ELEMENTS (3000 W EACH)
72x30
MODELS: STANDARD & FRONT TROUGH ONLY
24x30 27x30 30x30 36x30

16
36" DEEP MODELS
AMPS
VOLTS kW SINGLE
L1 L2 L3 PHASE
208 10.1 28 28 28 48
220 11.3 30 30 30 51
240 13.4 32 32 32 56
AMPS PER LINE-THREE PHASE
3 ELEMENTS (3750 W EACH)
AMPS
VOLTS kW SINGLE
L1 L2 L3 PHASE
208 13.4 43 43 28 65
220 15.0 45 45 30 68
240 17.9 49 49 32 75
AMPS PER LINE-THREE PHASE
4 ELEMENTS (3750 W EACH)
AMPS
VOLTS kW SINGLE
L1 L2 L3 PHASE
208 16.8 43 56 43 81
220 18.8 45 59 45 85
240 22.3 49 64 49 93
AMPS PER LINE-THREE PHASE
5 ELEMENTS (3750 W EACH)
60x36
MODELS: STANDARD & FRONT TROUGH ONLY
36x36 42x36 48x36
AMPS
VOLTS kW SINGLE
L1 L2 L3 PHASE
208 20.1 56 56 56 97
220 22.5 59 59 59 102
240 26.8 64 64 64 112
AMPS PER LINE-THREE PHASE
6 ELEMENTS (3750 W EACH)
72x36

SERVICE INFORMATION
If you have a service related question call 1-800-KEATING.
Please state the nature of the call; it will ensure speaking with the appropriate person.
Have your serial and model number available when ordering parts.
KEATING OF CHICAGO, INC.
8901 W. 50th Street, McCook, Illinios 60525-6001
Phone: [phone] FAX: [phone]
Toll Free 1-800-KEATING (In U.S. and Canada)
www.keatingofchicago.com
*As continuous product improvement occurs, specifications may be changed without notice.
KEATING LIMITED WARRANTY CARD
PLEASE COMPLETE AND MAIL AT ONCE–WARRANTY IS NOT IN EFFECT UNTIL CARD IS RETURNED.
WARRANTY CARD IS ALSO AVAILABLE TO COMPLETE ON LINE AT YOUR CONVENIENCE.
COMPANY: ______________________________________________________________________________________________________
ADDRESS: ______________________________________________________________________________________________________
CITY: ____________________________________________________________________ STATE:________________ ZIP:____________
DEALER: ________________________________________________________________________________________________________
DATE OF PURCHASE:__________________________________________________________ INVOICE NUMBER: __________________
SERIAL NUMBER: ____________________________________ FRYER FILTER SYSTEM GRIDDLE
REMARKS:__________________________________________ TOP-SIDE COOKER HOT PLATE PASTA PLUS
I HAVE READ THE INSTALLATION AND OPERATION INSTRUCTIONS.
SIGNED: __________________________________________________________________________ DATE: ______________________
“Serving Those Who Serve The Very Best”®