Kenmore Smarf Plug User manual

Quick Start Guide
Kenmore"' Smarf P_ug
w_fh AssureHn_<_" Connectivif.

i iI i '_,i_<_'if__i ii i _ ii _
a_t yoa _eed _s yoaF
smdrsphone, t_oZet or co_sp_.zre_
Pat _ _hstrucctones en espa_]ol po_" favor visite www.m} assureHnk.com/espanot

smart,ID _'_-_d
-xxxx-xxx 7
Locate the smart.ID number on the cover of this
booklet or on the Back of your Smart Plug. You'll
need this smartID number after you download
and launch the Assurelink Mapp.
Make sure your Assurelink MGateway is properly
installed and connected.
LED
1. Plug your Kenmore _Smart Plug into
a standard 120V AC outlet.

,ij3¸
Assurdink logo LED
/
Kenmo_ I<:_more K:¢_more K:_m@_
l][] [111 [111 l][]
80O 8
1 2 3 4
1. The Assurelink logo LED will flash on and off once
within a half second to indicate it is powering up.
2. The Assurelink logo LED and the On/OfY button LED
will remain off for 10-15 seconds.
3. Then, the Assurelink logo LED and the On/Off button
LED will alternately flash on and off twice within
2 seconds.
4. Then, Both LEDs will turn off, indicating the Smart
Plug has completed its start-up process.
Now you're ready to connect your Kenmore " Smart Plug!
o
iii iii!i!!ii!i!!!!i ii ii ii iiii iii
On
Do',#u'nl.o_dtie Assu:rd,_ntd"
1. Download and launch the Assurelink app on your personal
device. With an Assurelink Gateway installed, follow the
simple steps to add your new Kenmore _'Smart Plug.
Nol:e: You will need yo/r slnart.JD number,
2. The Assureiink app makes it easy to set up, program and control
your Smart Plug and other AssureJink-compatible products.
Apple, the Apple logo and }Phone are tradernarb_ of Apple Inc, registeled in the US and other countr es
App grote s a serv ce mark of Apple Inc Google Play and Androld are trademarks of Google Inc