Kenmore 11026002011 User manual

Use & Care Guide
Manual de uso y cuidado
Guide d'Utilisation et d'Entretien
English /Espa_oJ /Fran_ais
TabJe of Contents /indice /TabJe des Matieres ......2 Deslgned o useo_ly E g_Efflcency
de_e genls
Dseiiada pardu_ za_ soamenne
de_erge_tles de _:_o e_td mle_tlo ( E}_
ModeJs/ModeJos/Mod6Jes: 2600_010_ 2601_010
Ke @
do uto
_uto °
¢:= color number, nOmero de color, le num@o de la couleur
P/N W10280508A
Sears Brands Management Corporation
Hoffman Estates, IL 60179 U.S.A.
www.kenmore.com
www0sears.com
Sears Canada Inc.
Toronto, Ontario, Canada MSB 2B8
www0sears.ca

Table of Contents
WASHER SAFETY ............................. 3
WHAT'S NEW UNDER THE LID.....4
CONTROL PANEL
AND FEATURES ................................ 5
CYCLE GUIDE ................................... 6
USING YOUR WASHER .................. 7
WASHER MAINTENANCE .............. 9
TROUBLESHOOTING ..................... 11
PROTECTION AGREEMENTS ........15
WARRANTY ...................................... 15
ASSISTANCE OR
SERVICE ........................... Back Cover
Indice
SEGURIDAD DE LA
LAVA DO RA ..................................... 17
_,QUIe HAY DE NUEVO DEBAJO
DE LA TAPA?..................................... 18
PANEL DE CONTROL
Y CARACTER/STICAS ..................... 19
GUIA DE CICLOS ............................ 21
USO DE SU LAVADORA ............... 22
MANTENIMIENTO DE LA
LAVADORA ...................................... 25
SOLUCION DE PROBLEMAS ........ 27
CONTRATOS DE PROTECCION ..33
GARANT/A ..................................... 33
AYUDA O SERVICIO
TleCNICO ................... Contraportada
Table des mati_res
SleCURITIe DE LA LAVEUSE............ 34
QUOI DE NEUF SOUS LE
COUVERCLE? .................................. 35
TABLEAU DE COMMANDE ET
CARACTF_RISTIQUES ...................... 36
GUIDE DE PROGRAMMES ........... 38
UTILISATION DE LA LAVEUSE..... 40
ENTRETIEN DE LA LAVEUSE .........43
DEPANNAGE ................................... 45
CONTRATS DE PROTECTION .......51
GARANTIE ........................................ 51
ASSISTANCE OU
SERVICE ............... Couverture arri_re
2

WASHER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or
"WARNING." These words mean:
You can be killed or seriously injured if you don't
immediately follow instructions.
You can be killed or seriously injured if you don't
follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions,
including the following:
[] Read all instructions before using the washer.
[] Do not wash articles that have been previously cleaned
in, washed in, soaked in, or spotted with gasoline,
dry-cleaning solvents, other flammable, or explosive
substances as they give off vapors that could ignite or
explode.
[] Do not add gasoline, dry-cleaning solvents, or other
flammable, or explosive substances to the wash water.
These substances give off vapors that could ignite or
explode.
[] Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been used
for 2 weeks or more. HYDROGEN GAS IS
EXPLOSIVE. Ifthe hot water system has not been
used for such a period, before using the washing
machine, turn on all hot water faucets and let the water
flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is
flammable, do not smoke or use an open flame during
Do not allow children to play on or in the washer. Close
supervision of children is necessary when the washer is used
near children.
Before the washer is removed from service or discarded,
remove the door or lid.
[] Do not reach into the washer if the drum, tub or agitator is
moving.
[] Do not install or store the washer where it will be exposed to
the weather.
[] Do not tamper with controls.
[] Do not repair or replace any part of the washer or attempt any
servicing unless specifically recommended in this manual or in
published user-repair instructions that you understand and
have the skills to carry out.
[] See "Electrical Requirements" located in the installation
instructions for grounding instructions.
this time. SAVE THESE INSTRUCTIONS
State of California Proposition 65 Warnings:
WARNING: This product contains a chemical known to the State of California to cause cancer.
WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.

[WHAT'S NEW UNDER THE LiD?
Cleaning with Less Water
Traditional agitator-style
washing machine
Washplate
Washer with low-water
washplate wash system
The most striking difference in your new washer is the low-water
washplate wash system. The washer automatically adjusts the
water level to the load size--no water level selector is needed.
As the washer dampens and moves the load, the level of the
clothes will settle in the basket. This is normal, and does not
indicate that more clothes should be added.
IMPORTANT: You will not see a washer basket full of water like
with your past agitator-style washer.
Choosing the Right Detergent
Use only High Efficiency detergents. The package will be
marked "HE" or "High Efflciency." Low-water washing creates
excessive sudsing with a regular non-HE detergent. Using regular
detergent will likely result in longer cycle times and reduced
rinsing performance. It may also result in component failures
and noticeable mold or mildew. HE detergents are made to
produce the right amount of suds for the best performance.
Follow the manufacturer's instructions to determine the amount
of detergent to use.
i
When loading the washer with dirty laundry, fill it evenly
around the basket wall.
Aufomaflc Load Size Sensing
Once you start the cycle, the lid will loci<, and the washer will
begin the sensing process to determine the correct water level
for the load. This may take several minutes. You will find a
step-by-step description in the "Cycle Status Lights" section.
Use only High Efficiency (HE) detergent.
Concentrated Cleaning
Low-water cleaning means concentrated cleaning. Rather
than diluting detergent as done in an agitator-style washer,
this washer delivers the detergent directly to the soils.
The washplate moves the load while water is added in small
amounts until the load is wet. This low-water wash method
uses less water and energy compared to a traditional
agitator-style washer.
Normal Sounds You Can Expect
At different stages of the wash cycle, you may hear sounds and
noises that are different from those of your previous washer. For
example, you may hear a clicking and hum at the beginning of
the cycle, as the lid loci< goes through a self-test. There will be
different kinds of humming and whirring sounds as the washplate
moves the load. And sometimes, you may hear nothing at all, as
the washer determines the correct water level for your load or
allows time for clothes to soak.
4

High Efficiency
CONTROL PANEL AND FEATURES
S_ns_ng
Was_
R_nse
Spln
Cycle Complete
Lid Locked
Heavy Dut
Whites Warm Heavy High
Cool Normal
Cold Light No Spin
Delicates
Rinse/Spin
)rain/Spin
Washer
POWER START/PAUSE
OWASH CYCLEKNOB
Use the Wash Cycle Knob to select available cycles on your
washer. Turn the knob to select a cycle for your laundry load.
See "Cycle Guide" for detailed descriptions of cycles.
OCYCLEOPTIONS
When you select o cycle, its default options will light up.
NOTE: Not all cycles, options, and modifiers are available
on all models.
2ND RINSE
This option can be used to automatically add a second
rinse to most cycles.
Button Sounds:
Press and hold 2ND Rinse for 3 seconds to turn the
button sounds on or off.
FABRIC SOFTENER
This option must be selected if using fabric softener
during a cycle. It ensures that fabric softener is added
at the correct time in the rinse for even distribution.
You may also add or remove options for each cycle. Not all
options can be used with all cycles, and some are preset to
work with certain cycles.
CYCLEMODIFIERS
When you select a cycle, its default modifiers will light up.
Not all cycles, options, and modifiers are available on all
models.
WASH TEMP
Temperature Control senses and maintains uniform water
temperatures by regulating incoming hot and cold water.
Select a wash temperature based on the type of fabric
and soils being washed. For best results and following the
garment label instructions, use the warmest wash water
safe for your fabric.
*Warm and hot water may be cooler than what your
previous washer provided.
*Even in a Cool water wash, some warm water may
be added to the washer to maintain a minimum
temperature.
SOIL LEVEL
Soil level (wash time) is preset for each wash cycle.
For most loads, use the soil level that is preset with
the cycle you have chosen. For heavily soiled and sturdy
fabrics, press SOIL LEVEL to select more wash time,
if needed. For lightly soiled and delicate fabrics, press
SOIL LEVEL to select less wash time, if needed. Lower soil
level setting wJJJ help reduce tangling and wrinkling.
SPiN SPEED
This washer automatically selects the spin speed based
on the cycle selected. The preset speeds can be changed.
Not all spin speeds are available with all cycles.
*Faster spin speeds mean shorter dry times, but may
increase wrinkling in your load.
Slower spin speeds mean less wrinkling, but wHJ leave
your load more damp.
CYCLESTATUSLIGHTS INDICATOR
The Cycle Status Lights shows the progress of a cycle. At each
stage of the process, you may notice sounds or pauses that
are different from traditional washers.
SENSING Sensing
Wash
Rinse
Spin
Cycle Complete
Lid Locked
When the START/PAUSE/UNLOCK
LID button is pressed, the washer will
first perform a self-test on the lid lock
mechanism. You will hear a click, the
basket wJH make a slight turn, and the
lid will unlock briefly before locking
again.
Once the lid has locked the second
time, the washer will slowly spin the
dry load to estimate the load size, and begin adding
water. The washer will then move the load briefly, pause
to allow water to soak in to the load, and resume adding
water. This process may repeat until the correct amount
of water has been added for the load. You may also hear
water flowing through the dispenser, adding detergent to
the load.
NOTE: The sensing light may also come on during
the Wash portions of the cycle. This is normal.

WASH
You will hear the impeller moving the load. Unlike Sensing
traditional washers, the load is not covered with WQ_h
water. Low-water cleaning means concentrated Rinse
cleaning. Rather than diluting detergent as spin
done in an agitator-style washer, this washer cycleCorn#ere
delivers the detergent directly to the soils. The LidLocked
motor sounds may change at different stages in
the cycle. The wash time is determined by the
selected soil level.
RINSE Sonsing
Wash
You will hear sounds similar to the wash cycle
as the washer rinses and moves the load. Fabric Rinse
softener will be added if the Fabric Softener Spin
option was selected. Some cycles use spray cvcl_Complete
rinsing. Lid Locked
SPIN
The washer spins the load at increasing speeds
for proper water removal, based on the selected
cycle and spin speed.
Sensing
Wash
Rinse
Spin
Cycle Complete
Lid Locked
CYCLECOMPLETE
Once the cycle is complete, this light will come
on. Remove the load promptly for best results.
Sensing
Wash
Rinse
Spin
Cycle Complete
Lid Locked
LID LOCKED Sensing
To allow for proper load sensing and spinning, Wash
the lid will lock and the Lid Locked light will turn
on. This light indicates that the lid is locked and Rinse
cannot be opened. Sp_n
If yOU need to open the lid, press START/PAUSE/ cycleComplete
Lid Locked
UNLOCK LID. The lid will unlock once the washer
movement has stopped. This may take several
minutes if the load was spinning at high speed. _Z'_nn_
Press START/PAUSE/UNLOCK LID again to
resume the cycle. START/uPAUS_
CYCLE GUIDE
Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle that best fits the load
being washed.
Not all cycles and options are available on all models.
Cycle: Wash/Rinse Spi n Soil Available Cycle Detads:
wash: _ Temperature: Speed: Level: Options:
Heavily soiled
white fabrics
Sturdy fabrics,
colorfast items,
towels, jeans
Large items such
as sheets,
sleeping bags,
small comforters,
jackets, small
washable rugs
Cottons, linens,
and mixed
garment loads
No-kon fabrics,
cottons, perm
press, linens,
synthetics
Machine-wash
silks,
hand-wash
fa brics
Swimsuits and
items requiring
rinsing wffhout
detergent
Hand-wash
items or
dripping wet
items
Whites
Heavy
Duty
Bulky
Normal
Casual
Delicates
Rinse/
Spin
Drain!
Spin
6
Hot/Cold High
Warm!Cold Low
Cool!Cold No Spin
Cold/Cold
Hot!Cold High
Warm!Cold No Spin
Cool/Cold
Cold/Cold
Ex Heavy 2rid Rinse
Heavy Fabric Softener
Normal
Light
Ex Heavy 2rid Rinse
Heavy Fabric Softener
Normal
Light
Hot!Cold High Ex Heavy 2nd Rinse
Warm!Cold Low Heavy Fabric Softener
Cool/Cold No Spin Normal
Cold/Cold Light
Hot!Cold High Ex Heavy 2nd Rinse
Warm!Cold No Spin Heavy Fabric Softener
Cool/Cold Normal
Cold/Cold Light
Hot!Cold High Ex Heavy 2nd Rinse
Warm!Cold Low Heavy Fabric Softener
Cool/Cold No Spin Normai
Cold/Cold Light
Hot!Cold High
Warm!Cold Low
Cool/Cold No Spin
Cold/Cold
Cold/Cold High
Low
No Spin
2nd Rinse is a default option, but may
be turned off. For maximum soil removal use
liquid chlorine bleach.
Use this cycle for heavily soiled or sturdy
items. Water-level sensing process may
take longer for some items than for others
because they will absorb more water than
other fabric types.
Use this cycle to wash large items such as
jackets and small comforters. The washer
will fill with enough water to wet down the
load before the wash portion of the cycle
begins, and uses a higher water level than
other cycles.
Use this cycle for normally soiled cottons
and mixed fabric loads. This cycle features
aspray rinse. Low speed spin is not
available.
Use this cycle to wash loads of no-iron
fabrics such as sport shirts, blouses, casual
business clothes, permanent press, and
blends.
Ex Heavy 2nd Rinse
Heavy Fabric Softener
Normal
Light
Use this cycle to wash lightly soiled garments
indicating "Machine Washable Silks" or
"Gentle" cycle on the care label. Place small
items in mesh garment bags before washing.
This cycle uses a higher, preset water level.
Combines a rinse and spin for loads
requiring an additional rinse cycle or to
complete a load after power interruption.
Spin speed is selectable; default is high. This
cycle uses a higher, preset water level. Also
use for loads that require rinsing only.
High
Low
No Spin
This cycle uses a spin to shorten drying times
for heavy fabrics or special-care items
washed by hand. Use this cycle to drain
washer after cancelling a cycle or
completing a cycle after a power failure.

items to Cycle: Wash/Rinse Spin Sell Available Cycle DetalJs:
Wash: Temperature: Speed: Options:
No clothes in Clean Hot/Cold High Ex Heavy Run once a month to keep the inside
washer Washer of the washer fresh and clean. Higher
with water levels and bleach work together
Bleach to thoroughly clean the washer interior,
USING YOUR WASHER
Fire Hazard
Never place items in the washer that are dampened
with gasoline or other flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Doing so can result in death, explosion, or fire.
Electrical Shock Hazard
Plug into agrounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
tire, or electrical shock.
1. Sort and prepare your laundry _2. Load laundry into washer
*Empty pockets. Loose change, buttons, or any small object
can pass under the washplate and become trapped, causing
unexpected sounds.
*Sort items by recommended cycle, water temperature,
and colorfastness.
* Separate heavily soiled items from lightly soiled.
Separate delicate items from sturdy fabrics.
Do not dry garments if stains remain after washing, because
heat can set stains into fabric.
*Treat stains promptiy.
Close zippers, fasten hooks, tie strings and sashes, and remove
non=washable trim and ornaments.
*Mend rips and tears to avoid further damage to items
during washing.
Helpful Tips:
*When washing water-proof or water=resistant items, load
evenly. See "Cycle Guide" for tips and more information
on using the Bulky cycle.
Use mesh garment bags to help avoid tangling when washing
delicate or small items.
*Turn knits inside out to avoid pilling. Separate lint-takers from
lint=givers. Synthetics, knits_ and corduroy fabrics wJJJ pick up
lint from towels, rugs, and chenille fabrics.
NOTE: Always read and follow fabric care labels instructions to
avoid damage to your garments.
Load garments in loose heaps evenly around basket wall.
Do not wrap large items such as sheets around the washplate;
load them in loose piles around the sides of the basket.
Try mixing different sized items to reduce tangling.
IMPORTANT= Items need to move freely for best cleaning and
to reduce wrinkling and tangling.

Using Laundry Product Dispensers
Add HE detergent to dispenser
Detergent tray
Fabric softener tray
Add a measured amount of HE detergent
into detergent tray. This tray holds 3 oz. (89 mL). Do not overfill
tray - adding too much detergent may cause detergent to be
dispensed into the washer too early.
iMPORTANT: Use only High Efficiency detergents. The package
will be marked "HE" or "High Efficiency." Low-water washing
creates excessive sudsing with a regular non-HE detergent.
Using regular detergent will NkeJy result Jn longer cycle times
and reduced rinsing performance. It may also result in component
failures and noticeable mold or mildew. HE detergents are made
to produce the right amount of suds for the best performance.
Follow the manufacturer's instructions to determine the amount
of detergent to use.
Using Oxi or coJor-safe bJeach:
If using an Oxi or color-safe bleach laundry boost product, add
to the bottom of the washer basket before adding clothes.
HELPFUL TiP: See "Washer Maintenance" for information
on recommended method of cleaning washer dispenser trays.
to dispenser
Do not overfill, dilute, or use more than 1 cup (250 mL). Do not
use color-safe bleach or OxJ products in the same cycle with
liquid chlorine bleach.
8
Pour a measured amount of liquid fabric
softener into tray, always follow manufacturer's directions for
correct amount of fabric softener based on your load size.
Close dispenser drawer, then select Fabric Softener option.
IMPORTANT: Fabric Softener option must be selected to ensure
proper distribution at correct time in cycle. Do not overfill or
dilute. Overfilling dispenser will cause fabric softener to
immediately dispense into washer.
If 2nd Rinse option is selected, fabric softener wJJJbe dispensed
into the last rinse.
It is normal for a small amount of water to remain in the
dispenser at the end of a cycle.
POWER
Make sure the dispenser drawer is closed completely, then
press POWER to turn on the washer.
Select cycle
WASH CYCLES
Normal
Bulky CasuaJ
Heavy Duty Delicates
Whites Rinse/Spin
)rain/Spin
C_ean
Washer
with bleach
Turn cycle knob to choose your wash cycle. For more
information, see "Control Panel".

8. Select cycle settings
I Hot E× Heavy
Warm
Cool _1
Cored
High
Low
No Spin
ADJUSTS WASH TIME
Once you select a cycle, the default settings for that cycle will
be lit. Press the cycle modifiers buttons to change the Wash Temp,
Soil Level, and Spin Speed, if desired.
NOTE: Always read and follow fabric care labels instructions to
avoid damage to your garments.
Hot
Some cold water is added to save
energy. This may be cooler than
your hot water heater setting.
Warm
Some cold water may be added,
so this will be cooler than what
your previous washer provided.
Whites and pastels
Durable garments
Heavy soils
;;i Bright colors
;;i Moderate to light soils
Warm water is added to assist _iColors that bleed or fade
in soil removal and to help Light soils
dissolve detergents.
Cold
Warm water may be added to Dark colors that bleed
assist in soil removal and to help or fade
dissolve detergents. Light soils
9. Select cycle options
Select any other cycle options you may wish to add, if not
previously set. Some cycles will automatically add certain
options such as 2nd Rinse. These can be turned off, if desired.
NOTE: Not all options are available with all cycles.
lOe Select Start/Pause/Unlock Lid
to begin wash cycle
@
START/PAoUSE
Press the START/PAUSE/UNLOCK LID button to start the wash
cycle. When the cycle has finished, the CYCLE COMPLETE
indicator will light up. Promptly remove garments after cycle has
completed to avoid odor, reduce wrinkling, and rusting of metal
hooks, zippers, and snaps.
Unlocklng the lld to add garments:
If you need to open the lid to add 1 or 2 missed garments, you
may do so during the first portion of the Sensing step. Press
START/PAUSE/UNLOCK LID; the lid will unlock once the washer
movement has stopped. This may take several minutes if the load
was spinning at high speed. Then close lid and press START/
PAUSE/UNLOCK LiD again to restart the cycle. If lid is left open
for more than 10 minutes the water wnJ pump out.
WASHER MAINTENANCE
fWATER INLET HOSES
Replace inlet hoses after 5years of use to reduce the risk of
hose failure. Periodically inspect and replace inlet hoses if
bulges, kinks, cuts, wear, or leaks are found.
When replacing your inlet hoses, mark the date of replacement
on the label with a permanent marker.
CLEANING YOUR DISPENSER TRAY
You may find laundry product residue leftover in your dispenser
trays. To remove residue, follow this recommended cleaning
procedure:
1. Pull tray out until you feel resistance.
2. Lift up slightly, and then continue pulling out.
3. Wash in warm, soapy water, using a mild detergent.
4. Rinse with warm water.
5. Air dry, or dry with a towel, then place back into slot.
iMPORTANT: Dispenser trays are not dishwasher safe.

CLEANING YOUR WASHER
Keep your washer as clean and fresh as your clothes. To keep
washer interior odor=free, follow this recommended monthly
cleaning procedure:
1. Make sure the washer is empty.
2. Using liquid chlorine bleach, add 1 cup (250 mL) to liquid
chlorine bleach dispenser.
iMPORTANT: Do not add detergent to CLEAN WASHER with
bleach cycle. Do not use more than recommended amount of
bleach to avoid damaging product over time.
3. Close washer lid.
4. Press POWER.
5. Select CLEAN WASHER with bleach cycle.
6. Press START/PAUSE!UNLOCK LID. Water will pour into
washer for a moment and pause, lid wJJJlock, then cycle
wJJJcontinue.
NOTE: For best results, do not interrupt cycle, if cycle must
be interrupted, press POWER and run a Rinse!Spin cycle to
ensure cleaner or bleach have been rinsed from washer.
To clean exterior:
1. Use a soft, damp cloth or sponge to wipe up any spills.
2. Use all=purpose surface cleaner, if needed.
IMPORTANT: To avoid damaging the washer's finish, do not
use abrasive products.
NON-USE AND VACATION CARE
Operate your washer only when you are home. If moving, or
not using your washer for a period of time, follow these steps:
1. Unplug or disconnect power to washer.
2. Turn off: water supply to washer, to avoid flooding due to
water pressure surge.
WINTER STORAGE CARE
iMPORTANT: To avoid damage, install and store washer
where it will not freeze. Because some water may stay in
hoses, freezing can damage washer (steam models only).
if storing or moving during freezing weather, winterize your
washer.
To winterize washer:
1. Shut off: both water faucets, disconnect and drain water
inlet hoses.
2. Put 1 qt. (1 L) of R.V.=type antifreeze in basket and run
washer on Rinse!Spin cycle for about 30 seconds to mix
antifreeze and remaining water.
3. Unplug washer or disconnect power.
f
1.
2.
3.
4_
5.
6.
7.
r
To
or
TRANSPORTING YOUR WASHER
Shut off both water faucets. Disconnect and drain water
inlet hoses.
If washer will be moved during freezing weather, follow
Winter Storage Care directions before moving.
Disconnect drain from drain system and drain any
remaining water into a pan or bucket. Disconnect drain hose
from back of washer.
Unplug power cord.
Place inlet hoses and drain hose inside washer basket.
Drape power cord over edge and into washer basket.
Place packing tray from original shipping materials back
inside washer. If you do not have packing tray, place heavy
blankets or towels into basket opening. Close lid and place
tape over lid and down front of washer. Keep lid taped until
washer is placed in new location.
REINSTALLING/USING WASHER AGAIN
reinstall washer after non-use, vacation, winter storage
moving:
1. Refer to Installation Instructions to locate, level, and
connect washer.
2. Before using again, run washer through the following
recommended procedure:
To use washer again:
1. Flush water pipes and hoses. Reconnect water inlet hoses.
Turn on both water faucets.
Electrical Shock Hazard
Plug into agrounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
2. Plug in washer or reconnect power.
3. Run washer through Bulky cycle to clean washer and
remove antifreeze, if used. Use only HE High Efficiency
detergent. Use half the manufacturer's recommended amount
for a medium-size load.
10