Kennedy ACP300 User manual

© The Kennedy Group Ltd. 09/17
DECLARATION OF CONFORMIT
We hereby certify that KE EDY 300PSI - 12v Compressor/Tyre Inflator
(ORDER CODE: KE -503-2500K)
complies with all the relevant provisions of the
Harmonised Standards Applied:
Standards Applied:
EN 55014-1: 2006/+A1: 2009
RoHS2 Restriction of Hazardous Substances Directive 2011/65/EU
Standards Applied:
EN 62321:1:2009
Signed:
Date: 12th September 2017
ame: Keith Read
Position: HSQE Manager.
THE KE EDY GROUP, WIGSTO . LEICESTER, E GLA D. LE18 2FS
KENNED TOOLS
Wigston, Leicester, England, LE18 2FS
www.kennedy-tools.co.uk
THE ENVIRONMENT
Always dispose of unwanted tools, accessories and packaging materials in an environmentally
friendly manner.
In observance of European Directive 2012/19/EU on Waste Electrical and Electronic Equipment
(WEEE) and its implementation in accordance with national law, electrical goods that have reached
the end of their life must be collected separately and returned to an environmentally compatible
recycling facility.
Do not dispose of electrical goods with domestic waste materials as inappropriate disposal may
cause potential hazards to the environment and human health.
For further information, please contact your local authority or the retailer from whom you purchased
the product.
This product does not contain any restricted substances in concentrations and applications which
are banned by the European RoHS2 Directive.
QUALIT GUARANTEE & WARRANT
KE EDY TOOLS carry a one year manufacturer’s warranty.
KE EDY TOOLS are designed & manufactured
to the highest standards & specifications.
Assuring the quality and performance required by all sectors of industry.
KE EDY TOOLS are fully guaranteed against
faulty materials & workmanship.
Should they be found to be defective, they will either be repaired or replaced
free of charge (fair wear and tear and/or misuse excepted).
Please retain supplier invoice as proof of purchase.
OPERATOR’S MANUAL
300PSI — 12V COMPRESSOR
/ T RE INFLATOR
lease retain this information for future reference.
WARNING:
THE SAFETY I FORMATIO GIVE I SIDE MUST BE
READ A D U DERSTOOD BY A Y PERSO USI G, I STALLI G,
REPAIRI G OR MAI TAI I G THIS PRODUCT.
ORDER CODE:
KE -503-2500K
MODEL:
ACP300
• For inflating tyres, airbeds, boats,
sports equipment and any other
inflatable products
• Complete with 3m of cable
• 12 volt car cigarette lighter plug
• Dual air pressure gauge, in both
lb/in2 & kg/cm2
KENNED
QUALIT INDUSTRIAL TOOLING

2 7
KENNED
QUALIT INDUSTRIAL TOOLING
NOTES

6 3
lAlways follow the instructions or you may suffer physical injury or damage to property as a
result.
lAlways connect to an electrical supply of no more than 12v, either from a car cigarette
lighter point or a battery charger that is rated at 10amps or more to avoid damage to the
compressor and the charger.
lAlways check the owners manual of the item being inflated for a specific pressure rating, or
if you have no other means of reference - see our TY ICAL INFLATION RESSURE chart.
lAlways avoid over inflating, never exceed a recommended pressure. the item being inflated
may burst and cause serious injury.
lDo not use this compressor on high pressure tyres such as those on large lorries.
lDo not leave compressor working unattended.
This compressor is designed for occasional use only. If used for an extended period of time the
unit may overheat and damage the compressor. A sluggish operation or general excess heat
coming from the unit will indicate that the unit has been used for too long a period and should be
left to cool down for at least 30mins. before resuming inflation.
INTRODUCTION
SPECIFICATIONS
SAFET INSTRUCTIONS
You have purchased a quality product that is designed for high performance
and long service life. If correct use, safety and maintenance procedures are
observed this machine will last for many years.
SAFET INSTRUCTIONS
ORDER CODE: KE -503-2500K
MODEL: ACP300
RATED VOLTAGE: 12V
WORKI G PRESSURE: 300PSI
ET WEIGHT: 910g
DIME SIO S: 168(W) x 143(H) x 80(D)mm
NOTES

TYRE I FLATIO
1. lace the connector on the valve stem (Fig. 2) and push down,
close the thumb latch (Fig. 1) to lock the connector onto the
valve stem, making sure the connector is firmly on the tyre
valve stem.
2. Check the TYRE INFLATION RESSURE chart, this is for
reference only and you should consult the owners manual for
specific pressure ratings (never over inflate tyres).
3. lug the power lead into the lighter plug socket.
4. When the correct pressure is reached, unplug the power lead
from the socket.
FOR I FLATABLES - DI GHIES,
MATTRESSES,SPORTS BALLS ETC.
1. Select the suitable adaptor and insert it into the connector as with the tyre valve stem
above.
2. Check the TYRE INFLATION RESSURE chart, this is for reference only and you should
consult the owners manual for specific pressure ratings (never over inflate tyres).
3. Insert the adaptor into the article to be inflated (Fig. 1).
4. lug the power lead into the lighter plug socket.
5. When the correct pressure is reached, unplug the power lead from the socket.
6. Remove the adaptor from the inflated article and remove the adaptor from the connector.
PLEASE NOTE: Make sure to select the correct adaptor for the job, if you do not have
a suitable tight fitting adaptor, do not commence inflation.
4 5
OPERATION
PSI
Vehicle Tyres 24—32
lease consult the vehicles
owners manual for specific
pressure ratings.
Shock Absorbers
Normal Load 40
Heavy Load 90
Bicycle Tyres 35—40
Other Inflatables PSI
Basketball 9
Volleyball 5
Football 13
Lawn Tractor Tyre 22
Inflatable Boat (2 man) Firm
Inflatable Mattress Firm
TYPICAL I FLATIO PRESSURE
Always avoid over-inflation! NEVER EXCEED A RECOMMENDED RESSURE. the item being inflated
may burst and cause serious injury.
Soft inflatable material items may not have existing pressure ratings
on them, you must be careful not to over-inflate.
TROUBLE SHOOTING
POSSIBLE CAUSE
1. oor connection of the plug in the lighter
socket.
1. Connector not on secure enough or
possible leak.
1. Overheated from excessive use.
2. Voltage too low.
SOLUTION
1. Check the terminals are clean and the
socket is free from debris.
1. Check the article being inflated for
leaks.
2. Check the hose for breaks and leaking
fittings.
1. Shut it off and let it cool for at least 30
minutes.
2. Check the condition of the battery.
FAULT
Compressor does not
work/blows fuses.
Compressor runs but
does not inflate.
Compressor runs slowly.
Fig. 2
Fig. 1
OPERATION CONTINUED
Sport ball adaptor
(safety nozzle)
Adaptors for inflatables Locking valve stem connector
Thumb latch
ress down
to lock
Before disposing of the packaging or attempting to assemble this product please check that
the all of the below components are present and are not damaged.
BOX CONTENTS