
ENGLISH 5
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Default:
XX
DISPLAY
EASY MENU
When entering [
FUNCTION
]...
ON
:ZONE1 and ZONE2 illuminations change to white color.;
OFF
:ZONE2 illumination changes to white color while ZONE1
illumination remains as [
COLOR
SELECT
] color. (
24
)
(Refer to the illustration on page 23 for zone identification.)
TUNER SETTING
DAB L-BAND ON: Receives L-BAND ensemble during digital audio
reception.
; OFF: Cancels.
DAB ANT POWER ON: Supplies power to the DAB antenna. Selects when using
the supplied antenna.
; OFF: Does not supply power. Selects
when using passive antenna without booster.
(
33
)
PRESET TYPE NORMAL
:Memorizes one station for each preset button in
each band (FM1/ FM2/ FM3/ AM/ SW1/ SW2/ DB1/ DB2/ DB3).;
MIX
:Memorizes one station for each preset button, regardless of
the selected band.
SYSTEM
KEY BEEP* ON
:Activates the keypress tone.;
OFF
:Deactivates.
SOURCE SELECT
PANDORA SRC ON
:Enables PANDORA in source selection.;
OFF
:Disables. (
13
)
BUILT-IN AUX ON
:Enables AUX in source selection.;
OFF
:Disables. (
10
)
CD READ 1
:Automatically distinguishes between audio file disc and music
CD.;
2
:Forces to play as a music CD. No sound can be heard if an
audio file disc is played.
*
Not applicable if 3-way crossover is selected.
F/W UPDATE
UPDATE SYSTEM/ UPDATE DAB1/ UPDATE DAB2
F/W UP xx.xx/
F/W UP xxxxx/
F/W UP Vxxx
YES
:Starts upgrading the firmware.;
NO
:Cancels (upgrading is not
activated).
For details on how to update the firmware, see:
www.kenwood.com/cs/ce/
FACTORY RESET YES
:Resets the settings to default (except the stored station).;
NO
:Cancels.
CLOCK
CLOCK DISPLAY ON
:The clock time is shown on the display even when the unit is turned
off.;
OFF
:Cancels.
ENGLISH
Select the display language for [
FUNCTION
] menu and music information
if applicable.
By default, [
ENGLISH
] is selected.
РУССКИЙ
ESPANOL
Change the crossover type
1 Press repeatedly to enter STANDBY.
2 Press and hold number buttons 4and 5to enter crossover select.
The current crossover type appears.
3 Turn the volume knob to select “2WAY” or “3WAY”, then press the
knob.
4 Turn the volume knob to select “YES” or “NO”, then press the knob.
The selected crossover type appears.
• To cancel, press and hold .
• To adjust the selected crossover settings, (
22
).
Caution
Select a crossover type according to how the speakers are connected. (
32
)
If you select a wrong type:
• The speakers may damage.
• The output sound level may be extremely high or low.
GETTING STARTED
JS_KWD_DPX_7000DAB_XN_EN_2.indd 5JS_KWD_DPX_7000DAB_XN_EN_2.indd 5 8/12/2015 4:51:31 PM8/12/2015 4:51:31 PM