Kenwood KDC-4057UB User manual

GET0848-003A (EW/E0)© 2012 JVC KENWOOD Corporation
KDC-4557U
KDC-4057UB
KDC-4057UR
KDC-3457UQ
CD-RECEIVER
INSTRUCTION MANUAL
CD-RECEIVER
BEDIENUNGSANLEITUNG
KDC-3357UY
KDC-3257URY
KDC-3057UG
KDC-3057UR
KDC-3057URY
KDC-317UR
Cover_KDC-4557U_003A_3.indd 1Cover_KDC-4557U_003A_3.indd 1 7/25/12 10:59:08 AM7/25/12 10:59:08 AM

i
Declaration of Conformity with regard to the EMC Directive 2004/108/EC
Manufacturer:
JVC KENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan
EU Representative’s:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
Konformitätserklärung in Bezug auf die EMC-Vorschrift 2004/108/EC
Hersteller:
JVC KENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan
EU-Vertreter:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN, Niederlande
This Product is not installed by the manufacturer of a vehicle on the production line,
nor by the professional importer of a vehicle into an EU Member State.
Dieses Produkt wird weder vom Hersteller eines Fahrzeugs während der Produktion
noch von einem professionellen Importeur eines Fahrzeugs in einen EU-
Mitgliedsstaat eingebaut.
Information on Disposal of Old Electrical and Electronic Equipment and
Batteries (applicable for EU countries that have adopted separate waste
collection systems)
Products and batteries with the symbol (crossed-out wheeled bin) cannot be
disposed as household waste.
Old electrical and electronic equipment and batteries should be recycled at a facility
capable of handling these items and their waste byproducts.
Contact your local authority for details in locating a recycle facility nearest to you.
Proper recycling and waste disposal will help conserve resources whilst preventing
detrimental effects on our health and the environment.
Notice: The sign “Pb” below the symbol for batteries indicates that this battery
contains lead.
Entsorgung von gebrauchten elektrischen und elektronischen Geräten und
Batterien (anzuwenden in den Ländern der Europäischen Union und anderen
europäischen Ländern mit einem separaten Sammelsystem für solche Geräte)
Das Symbol (durchgestrichene Mülltonne) auf dem Produkt oder seiner Verpackung
weist darauf hin, dass dieses Produkt nicht als normaler Haushaltsabfall behandelt
werden darf, sondern an einer Annahmestelle für das Recycling von elektrischen und
elektronischen Geräten und batterien abgegeben werden muss.
Durch Ihren Beitrag zur korrekten Entsorgung dieses Produktes schützen Sie die
Umwelt und die Gesundheit Ihrer Mitmenschen.
Unsachgemässe oder falsche Entsorgung gefährden Umwelt und Gesundheit.
Weitere Informationen über das Recycling dieses Produktes erhalten Sie von Ihrer
Gemeinde oder den kommunalen Entsorgungsbetrieben.
Achtung: Das Zeichen „Pb“ unter dem Symbol fur Batterien zeigt an, dass diese
Batterie Blei enthalt.
Safety_GET0848-003A.indd iSafety_GET0848-003A.indd i 8/2/12 5:50:28 PM8/2/12 5:50:28 PM

ii
The marking of products using lasers
The label is attached to the chassis/case and says that the component uses laser
beams that have been classified as Class 1. It means that the unit is utilizing laser
beams that are of a weaker class. There is no danger of hazardous radiation outside
the unit.
Kennzeichnung von Geräten mit Laser-Abtastern
Das Etikett ist am Chassis/Gehäuse angebracht und besagt, dass sich die
Komponente Laserstrahlen bedient, die als Laserstrahlen der Klasse 1 klassifiziert
wurden. Dies weist darauf hin, dass sich das Gerät Laserstrahlen bedient, die einer
schwächeren Klasse angehören. Das bedeutet, dass durch den sehr schwachen
Laserstrahl keine Gefahr durch gefährliche Strahlungen außerhalb des Geräts
besteht.
For Turkey
Bu ürün 28300 sayılı Resmi Gazete’de yayımlanan Atik Elektrikli ve Elektronik Eşyalarin
Kontrolü Yönetmeliğe uygun olarak üretilmiştir.
Eski Elektrik ve Elektronik Ekipmanların İmha Edilmesi Hakkında Bilgi (ayrı atık
toplama sistemlerini kullanan ülkeleri için uygulanabilir)
Sembollü (üzerinde çarpı işareti olan çöp kutusu) ürünler ev atıkları
olarak atılamaz.
Eski elektrik ve elektronik ekipmanlar, bu ürünleri ve ürün atıklarını
geri dönüştürebilecek bir tesiste değerlendirilmelidir. Yaşadığınız
bölgeye en yakın geri dönüşüm tesisinin yerini öğrenmek için
yerel makamlara müracaat edin. Uygun geri dönüşüm ve atık imha
yöntemi sağlığımız ve çevremiz üzerindeki zararlı etkileri önlerken
kaynakların korunmasına da yardımcı olacaktır.
Safety_GET0848-003A.indd iiSafety_GET0848-003A.indd ii 8/2/12 5:50:28 PM8/2/12 5:50:28 PM

2
CONTENTS BEFORE USE
Warning
Do not operate any function that takes your attention away from safe driving.
Caution
Volume setting:
• Adjust the volume so that you can hear sounds outside the car to prevent accident.
• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the
output level.
General:
• Avoid using the USB device or iPod/iPhone if it might hinder driving safety.
• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.
• Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short circuit.
•
If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate.
Remote control (RC-406):
• Do not leave the remote control in hot places such as on the dashboard.
• The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or equivalent
type.
• The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
• Keep battery out of reach of children and in original package until ready to use. Dispose of used batteries
promptly. If swallowed, contact a physician immediately.
2
BEFORE USE 2
BASICS 3
GETTING STARTED 4
RADIO 5
CD / USB / iPod 6
AUX 7
AUDIO SETTINGS 8
DISPLAY SETTINGS 9
MORE INFORMATION 9
TROUBLESHOOTING 10
SPECIFICATIONS 11
INSTALLATION / CONNECTION 12
How to read this manual
• Operations explained mainly using buttons
on the faceplate.
• [XX] indicates the selected items.
• ( ➜ XX) indicates references are available on
the stated page number.
Maintenance
Cleaning the unit: Wipe off dirt on the faceplate with a dry silicon or soft cloth.
Cleaning the connector: Detach the faceplate and clean the connector with a
cotton swab gently, being careful not to damage the connector.
Handling discs:
• Do not touch the recording surface of the disc.
• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
• Do not use any accessories for the disc.
• Clean from the center of the disc and move outward.
• Clean the disc with a dry silicon or soft cloth. Do not use any solvents.
• When removing discs from this unit, pull them out horizontally.
• Remove burrs from the center hole and disc edge before inserting a disc.
Connector (on the reverse
side of the faceplate)
EN_KDC-4557U[E0E20]f.indd 2EN_KDC-4557U[E0E20]f.indd 2 7/25/12 5:43:26 PM7/25/12 5:43:26 PM

3
KDC-4557U KDC-4057UB
KDC-4057UR
KDC-3457UQ KDC-3357UY
KDC-3257URY KDC-3057UG
KDC-3057UR
KDC-317UR
KDC-3057URY
BASICS
To Do this (on the faceplate) Do this (on the remote control)
Turn on the power Press LSRC.
• Press and hold to turn off the power.
Press and hold SRC to turn off the power.
( Pressing SRC does not turn on the power. )
Adjust the volume Turn the volume knob. Press VOL or VOL .
Press ATT during playback to attenuate the sound.
• Press again to cancel.
Select a source Press LSRC repeatedly. Press SRC repeatedly.
Change the display
information
Press SCRL DISP repeatedly.
• Press and hold to scroll the current display information. ( not available )
Faceplate
How to reset
Attach
Detach
Remote control (RC-406)
(supplied for
KDC-3357UY
)
Volume knob
(turn/press) Loading slot
Detach
button
ENGLISH |
Pull out the
insulation sheet
when using for
the first time.
Your preset adjustments
will also be erased.
How to replace the battery
* Not used.
Remote sensor (Do not expose
to bright sunlight.)
EN_KDC-4557U[E0E20]f.indd 3EN_KDC-4557U[E0E20]f.indd 3 7/26/12 3:01:44 PM7/26/12 3:01:44 PM

4
GETTING STARTED
Cancel the demonstration
When you turn on the power (or after you reset the unit), the display
shows: “CANCEL DEMO” \“PRESS” \“VOLUME KNOB”
1 Press the volume knob.
[YES] is selected for the initial setup.
2 Press the volume knob again.
“DEMO OFF” appears.
Set the clock
1 Press the volume knob to enter [FUNCTION] .
2 Turn the volume knob to select [SETTINGS] , then press the knob.
3 Turn the volume knob to select [CLOCK] , then press the knob.
4 Press the volume knob to select [CLOCK ADJ] .
5 Turn the volume knob to adjust the hour, then press the knob.
6 Turn the volume knob to adjust the minute, then press the knob.
Press 4 / ¢to move between the hour and minute adjustment.
7 Press and hold to exit.
(or)
Press and hold SCRL DISP to enter clock adjustment mode directly
while in clock display screen.
Then, perform steps 5and 6above to set the clock.
1
2
Set the initial settings
1 Press SRC to enter [STANDBY] .
2 Press the volume knob to enter [FUNCTION] .
3 Turn the volume knob to select [INITIAL SET] , then press the knob.
4 Turn the volume knob to make a selection (see the table below), then press
the knob.
5 Press and hold to exit.
• To return to the previous hierarchy, press .
Default: XX
PRESET TYPE NORM: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/
MW/ LW). ; MIX: Memorizes one station for each preset button regardless of the
selected band.
KEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates.
RUSSIAN SET ON: Folder name, file name, song title, artist name, album name are displayed in
Russian (if applicable). ; OFF: Cancels.
P-OFF WAIT Applicable only when the demonstration mode is turned off.
Sets the duration when the unit will automatically turns off (while in standby mode)
to save the battery.
–––: Cancels ; 20M: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes
BUILTIN AUX ON: Enables AUX in source selection. ; OFF: Disables. (
➜ 7)
CD READ 1: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play
as a music CD. No sound can be heard if an audio file disc is played.
SWITCH PRE REAR/ SUB-W: Selects whether rear speakers or a subwoofer are connected to the
line out terminals on the rear (through an external amplifier).
SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches or
4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum performance.
F/W UPDATE
F/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).
For details on how to update the firmware, see: www.kenwood.com/cs/ce/
3
EN_KDC-4557U[E0E20]f.indd 4EN_KDC-4557U[E0E20]f.indd 4 7/26/12 3:01:45 PM7/26/12 3:01:45 PM

5
ENGLISH |
RADIO
Search for a station
1 Press LSRC to select TUNER.
2 Press repeatedly (or press *AM– / #FM+ on RC-406) to select FM1/
FM2/ FM3/ MW/ LW.
3 Press 4/¢to search for a station.
• To store a station: Press and hold one of the number buttons (1to 6).
• To select a stored station: Press one of the number buttons (1to 6)
Direct Access Tuning (using RC-406) (for
KDC-3357UY
)
1 Press *AM– / #FM+ to select a band.
2 Press DIRECT to enter Direct Access Tuning.
“– – – • –” (for FM) or “– – – –” (for MW/ LW) appears on the display.
3 Press the number buttons to enter a frequency.
4 Press 4/ ¢(+) to search for a frequency.
• To cancel, press .
• If no operation is done for 10 seconds after step 3, Direct Access Tuning is
automatically canceled.
Other settings
1 Press the volume knob to enter [FUNCTION] .
2 Turn the volume knob to select [SETTINGS] , then press the knob.
3 Turn the volume knob to make a selection (see the table on the right),
then press the knob.
4 Press and hold to exit.
Default: XX
LOCAL SEEK ON: Searches only FM stations with good reception. ; OFF: Cancels.
SEEK MODE Selects the tuning method for the
4 / ¢ buttons.
AUTO1: Automatically searches for a station. ; AUTO2: Searches for a preset station. ;
MANUAL: Manually search for a station.
AUTO
MEMORY
YES: Automatically starts memorizing 6 stations with good reception. ; NO: Cancels.
(Selectable only if [NORM] is selected for [PRESET TYPE].) (
➜ 4)
MONO SET ON: Improves the FM reception, but the stereo effect may be lost. ; OFF: Cancels.
PTY SEARCH Press the volume knob to enter PTY language selection. Turn the volume knob to select the
PTY language (ENGLISH/ FRENCH/ GERMAN), then press the knob.
Selects the available Program Type (see below), then, press 4 / ¢ to start.
TI ON: Allows the unit to temporarily switch to Traffic Information. ; OFF: Cancels.
NEWS SET 00M – 90M: Sets the time for receiving the next news bulletin. ; OFF: Cancels.
AF SET ON: Automatically searches for another station broadcasting the same program in the
same Radio Data System network with better reception when the current reception is
poor. ; OFF: Cancels.
REGIONAL ON: Switches to another station only in the specific region using the “AF” control. ;
OFF: Cancels.
ATP SEEK ON: Automatically searches for a station with better reception when the traffic
information’s reception is poor. ; OFF: Cancels.
CLOCK
TIME SYNC ON: Synchronizes the unit’s time to the Radio Data System station time. ; OFF: Cancels.
TUNER SET: Selectable only when the source is not TUNER.
TI/ NEWS SET/ AF SET/ REGIONAL/ ATP SEEK: (For details, refer to the table above.)
• [LOCAL SEEK]/ [MONO SET] / [PTY SEARCH]/ [TI]/ [NEWS SET] / [AF SET] / [REGIONAL] / [ATP
SEEK] is selectable only when the source is FM.
• Available Program Type:
SPEECH : NEWS , AFFAIRS , INFO (information), SPORT , EDUCATE , DRAMA , CULTURE , SCIENCE ,
VARIED , WEATHER , FINANCE , CHILDREN , SOCIAL , RELIGION , PHONE IN , TRAVEL ,
LEISURE , DOCUMENT
MUSIC : POP M (music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS , OTHER
M (music), JAZZ , COUNTRY , NATION M (music), OLDIES , FOLK M (music)
The unit will search for the Program Type categorized under [SPEECH] or [MUSIC] if
selected.
• If the volume is adjusted during reception of traffic information, alarm or news bulletin,
the adjusted volume is memorized automatically. It will be applied the next time traffic
information, alarm or news bulletin function is turned on.
EN_KDC-4557U[E0E20]f.indd 5EN_KDC-4557U[E0E20]f.indd 5 7/27/12 4:17:12 PM7/27/12 4:17:12 PM

6
CD / USB / iPod
Start playback
CD
The source changes to CD and playback
starts.
USB
The source changes to USB and playback
starts.
iPod/iPhone (for
KDC-4557U
/
KDC-4057UB
/
KDC-4057UR
)
The source changes to iPod and playback
starts.
Press and hold iPod to select the control
mode while in iPod source.
MODE ON: From the iPod*1.
MODE OFF: From the unit.
*1You can still control play/pause, file
selection, fast-forward or reverse files
from the unit.
Label side 0 : Eject disc
USB input terminal
USB input terminal
CA-U1EX (max.: 500 mA)
(optional accessory)
KCA-iP102 (optional accessory)
: Applicable
— : Not applicable
KDC-4557U
KDC-4057UB
KDC-4057UR
To Do this CD USB iPod
Pause or resume
playback
Press 638 (or ENT 38 on RC-406).
Select a track/file Press 4/ ¢(or 4/ ¢(+) on RC-406).
Select a folder Press 1–/2+(or *AM– /#FM+ on RC-406). *2—
Reverse/Fast-forward Press and hold 4/ ¢(or 4/ ¢(+) on RC-406).
Select a track/file
from a list 1Press .
2Turn the volume knob to make a selection, then press the knob.
• AAC/MP3/WMA file: Select the desired folder, then a file.
• iPod or KENWOOD Music Editor Light (KME Light)/ KENWOOD Music
Control (KMC) file*4: Select the desired file from the list (PLAYLISTS,
ARTISTS, ALBUMS, SONGS, PODCASTS*5, GENRES, COMPOSERS*5).
• To return to the root folder (or first file), press number button 5.
• To return to the previous hierarchy, press .
• To cancel, press and hold .
*3
• To skip songs at a specific ratio, press 4/ ¢. ( ➜ 7)
—*4*3
Repeat play Press 4repeatedly.
• Audio CD: TRAC REPEAT, REPEAT OFF
• AAC/MP3/WMA file: FILE REPEAT, FOLD REPEAT, REPEAT OFF
• iPod or KME Light/ KMC file: FILE REPEAT, REPEAT OFF
*3
Random play Press 3or repeatedly.
• Audio CD: DISC RANDOM, RANDOM OFF
• AAC/MP3/WMA/iPod or KME Light/ KMC file: FOLD RANDOM,
RANDOM OFF
*3
Press and hold 3or to select “ALL RANDOM.” *2*3
*2Only for AAC/MP3/WMA files.
*3Applicable only when
[MODE OFF] is selected.
*4Only for files registered in the database created with KME Light/
KMC. ( ➜ 9)
*5Only for iPod.
EN_KDC-4557U_001A_f.indd 6EN_KDC-4557U_001A_f.indd 6 8/22/12 10:26:05 AM8/22/12 10:26:05 AM

7
ENGLISH |
Direct Music Search (using RC-406)
(for
KDC-3357UY
)
1 Press DIRECT.
2 Press the number buttons to enter a track/file
number.
3 Press 4/ ¢(+) to search for music.
• To cancel, press .
• Not available if Random Play is selected.
• Not applicable for iPod, KME Light/ KMC file. ( ➜ 9)
Select a song by name
(for
KDC-4557U
/
KDC-4057UB
/
KDC-4057UR
)
While listening to iPod...
1 Press .
2 Turn the volume knob to select a category, then
press the knob.
3 Press again.
4 Turn the volume knob to select the character to
be searched for.
5 Press 4/ ¢to move to the entry position.
You can enter up to three characters.
6 Press the volume knob to start searching.
7 Turn the volume knob to make a selection, then
press the knob.
Repeat step 7until the desired item is selected.
• To search for a character other than A to Z and 0 to 9,
enter only “*”.
• To return to the previous hierarchy, press .
• To return to the top menu, press number button 5.
• To cancel, press and hold .
Set the skip ratio
While listening to iPod (for
KDC-4557U
/
KDC-4057UB
/
KDC-4057UR
) or KME Light/ KMC
file...
1 Press the volume knob to enter [FUNCTION] .
2 Turn the volume knob to select [SETTINGS] , then
press the knob.
3 Turn the volume knob to select [SKIP SEARCH] ,
then press the knob.
4 Turn the volume knob to make a selection, then
press the knob.
0.5% (default)/ 1% / 5% / 10% : Sets the skip ratio
when searching for a song.
(Holding 4/¢skips songs at 10% regardless
of the setting made.)
5 Press and hold to exit.
Muting upon the reception of a phone call
Connect the MUTE wire to your telephone using a
commercial telephone accessory. ( ➜ 13)
When a call comes in, “CALL” appears.
• The audio system pauses.
• To continue listening to the audio system during a
call, press SRC. “CALL” disappears and the audio
system resumes.
When the call ends, “CALL” disappears.
• The audio system resumes.
AUX
Preparation:
Select [ON] for [BUILTIN AUX] . (➜ 4 )
Start listening
1 Connect a portable audio player (commercially
available).
2 Press SRC to select AUX.
3 Turn on the portable audio player and start
playback.
Set the AUX name
While listening to AUX...
1 Press the volume knob to enter [FUNCTION] .
2 Turn the volume knob to select [SETTINGS] , then
press the knob.
3 Turn the volume knob to select [AUX NAME] , then
press the knob.
4 Turn the volume knob to make a selection, then
press the knob.
AUX (default)/ DVD / PORTABLE / GAME / VIDEO / TV
5 Press and hold to exit.
Auxiliary input jack
Portable audio
player
3.5 mm stereo mini plug with “L” shaped
connector (commercially available)
CD / USB / iPod
EN_KDC-4557U[E0E20]f.indd 7EN_KDC-4557U[E0E20]f.indd 7 7/25/12 5:43:31 PM7/25/12 5:43:31 PM

8
AUDIO SETTINGS
While listening to any source...
1 Press the volume knob to enter [FUNCTION] .
2 Turn the volume knob to select [AUDIO CTRL] , then press the knob.
3 Turn the volume knob to make a selection (see the table below), then press
the knob.
Repeat step 3until the desired item is selected or activated.
4 Press and hold to exit.
• To return to the previous hierarchy, press .
Default: XX
SUB-W LEVEL –15 to +15 (0): Adjusts the subwoofer output level.
BASS LEVEL –8 to +8 (0):
Adjusts the level to memorize for each source. (Before making
an adjustment, select the source you want to adjust.)
MID LEVEL –8 to +8 (0):
TRE LEVEL –8 to +8 (0):
EQ PRO
BASS ADJUST BASS C FRQ 60/ 80/ 100/ 200:Selects the center frequency.
BASS LEVEL –8 to +8 (0): Adjusts the level.
BASS Q FCTR 1.00/ 1.25/ 1.50/ 2.00:Adjusts the quality factor.
BASS EXTEND ON:Turns on the extended bass. ; OFF:Cancels.
MID ADJUST MID C FRQ 0.5K/ 1.0K/ 1.5K/ 2.5K:Selects the center frequency.
MID LEVEL –8 to +8 (0): Adjusts the level.
MID Q FCTR 0.75/ 1.00/ 1.25:Adjusts the quality factor.
TRE ADJUST TRE C FRQ 10.0K/ 12.5K/ 15.0K/ 17.5K:Selects the center frequency.
TRE LEVEL –8 to +8 (0): Adjusts the level.
PRESET EQ NATURAL/ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL:Selects
a preset equalizer suitable to the music genre. (Select [USER] to use the
customized bass, middle, and treble settings.)
BASS BOOST B.BOOST LV1/ B.BOOST LV2/ B.BOOST LV3:Selects your preferred bass boost
level. ; OFF:Cancels.
LOUDNESS LOUD LV1/ LOUD LV2:Selects your preferred low and high frequencies boost
to produce a well-balanced sound at a low volume level. ; OFF:Cancels.
BALANCE L15 to R15 (0): Adjusts the left and right speaker output balance.
FADER R15 to F15 (0): Adjusts the rear and front speaker output balance.
SUB-W SET ON:Turns on the subwoofer output. ; OFF:Cancels.
DETAIL SET
LPF SUB-W THROUGH:All signals are sent to the subwoofer. ; 85HZ/120HZ/
160HZ:Audio signals with frequencies lower than 85 Hz/ 120 Hz/ 160 Hz are
sent to the subwoofer.
SUB-W PHASE REV (180°)/ NORM (0°): Selects the phase of the subwoofer output to be in
line with the speaker output for optimum performance. (Selectable only if a
setting other than [THROUGH] is selected for [LPF SUB-W].)
SUPREME SET ON:Creates realistic sound by interpolating the high-frequency components
that are lost in AAC/MP3/WMA audio compression. ; OFF:Cancels. (Selectable
only when playing back an AAC/MP3/WMA disc or a USB device, except
iPhone/iPod.)
VOL OFFSET
(Default: 0)
–8 to +8 (for AUX) ; –8 to 0 (for other sources): Presets the volume
adjustment level of each source. (Before adjustment, select the source you
want to adjust.)
• [SUB-W LEVEL] / [SUB-W SET] / [LPF SUB-W] / [SUB-W PHASE] is selectable only if
[SWITCH PRE] is set to [SUB-W] . (➜ 4 )
• [SUB-W LEVEL] / [LPF SUB-W] / [SUB-W PHASE] is selectable only if [SUB-W SET] is set
to [ON] .
EN_KDC-4557U[E0E20]f.indd 8EN_KDC-4557U[E0E20]f.indd 8 8/14/12 12:06:17 PM8/14/12 12:06:17 PM